Video grabber MS2130: the good old MS2109 on steroids. At least it was... 😕 #499
Replies: 78 comments 343 replies
-
|
Hi Awawa, Awesome work on the above, I've just got one of these on order now, I was wondering if you use a HDMI splitter and if so which one? Im not sure if they have limiting factors or if its legit just an in and out so thought I'd ask. Thanks :) |
Beta Was this translation helpful? Give feedback.
-
|
Yes, you need a decent HDMI splitter for this grabber which should at least support scaling, HDCP, EDID management and CEC if possible. I am not up to date on the subject of HDMI splitters, I have two old FeinTech VSP01201 and EZ-SP12H2 splitters. There are some differences between them, but they work fine. Maybe there are some newer and better 48Gbps matrices, you have to look on the internet. Here the user has of these newer interesting models: #496 (MS2109 and MS2130 grabbers also appear in this subject) |
Beta Was this translation helpful? Give feedback.
-
|
Cool thanks for the review. Nice work 👍 Does it do 1080p@120hz ? 😄 |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for that, looks promising. This could be a cheap solution to one of my issues Could I ask you to check 1080p@120 10bit HDR. I'm looking for xbox SX support which says 120hz , 10 bit(depth) |
Beta Was this translation helpful? Give feedback.
-
|
10 bit mode was not available for me |
Beta Was this translation helpful? Give feedback.
-
|
Holy moly...Testing now the second model with Rpi, 10bit is missing but 12bit HDR 1080p120, YCbCr 422 limited seems work fine. 12bit HDR 1080p120 RGB is a bit pink, something is wrong with captured colors. Cant test 4k120 HDR because of my RTX is HDMI2.0 only. |
Beta Was this translation helpful? Give feedback.
-
|
WOW! That's awesome mate, thanks for sharing that. I'm ordering one to test, takes about 3-4 weeks to get here, although sometimes it's just one week, fingers crossed. Just to confirm, this is the one you purchased: https://www.aliexpress.com/item/1005004990708725.html Thanks |
Beta Was this translation helpful? Give feedback.
-
|
Yes, it took 2 weeks to deliver it to EU since they were sent (few days delays on processing due to Chinese New Year, model A had some small delay). The products came in the original boxes, although the description says otherwise. |
Beta Was this translation helpful? Give feedback.
-
|
Updated preview with a LUT calibration done for MJPEG, when MS2130 is connected to USB2.0 port. There are some minor differences and as could be expected quality for MJPEG is a bit worse than YUV. |
Beta Was this translation helpful? Give feedback.
-
|
Tested latency. It's good, much better than old MS2109 despite using uncompressed YUV format. Tested under Windows 10 using Chrome. 1080p120 1080p60 |
Beta Was this translation helpful? Give feedback.
-
|
seems to be the new budget king mate :) mine's working a treat! |
Beta Was this translation helpful? Give feedback.
-
|
still waiting for delivery...beep beep |
Beta Was this translation helpful? Give feedback.
-
|
Sound effects also work with MS2130. Proper
|
Beta Was this translation helpful? Give feedback.
-
|
Hi awawa-dev what about usb drop? Is SPI necessary for led driver? |
Beta Was this translation helpful? Give feedback.
-
#320 |
Beta Was this translation helpful? Give feedback.
-
|
Got mine! Looks really good, but the Pi 3B+ only has usb 2.0 so that means no YUV? |
Beta Was this translation helpful? Give feedback.
-
|
It's in the main thread.
I suspect Windows does these "nv12" modes just like I do in HyperHDR: extracting raw YUV planes from MJPEG (still it's rather 'MJPEG' converted to 'NV12' with some drawbacks), but Linux/Rpi can't do the same. You don't need 1080p for the ambilight, 480p60 is enough unless you have a very large&high density LED strip. 1080p30 is good for the calibration only (less random artifacts thanks to the higher resolution). USB3.0 is important... let's hope 2-3 more months and we'll be able to buy Rpi4 at retail prices again without problems. |
Beta Was this translation helpful? Give feedback.
-
|
Hey awawa I bought the MS2130 and wanted to try it out. I have the grabber running through a VERTEX2. The Grabber is recognized but it gets no signal from the VERTEX2. According to HDFURY it is because the grabber can not HDR? |
Beta Was this translation helpful? Give feedback.
-
|
Hi BTW someone on the Aliexpress auction reported in the comments that it can even process VRR signal (up to 60Hz) but I don't have a console to verify it. |
Beta Was this translation helpful? Give feedback.
-
|
I think my grabber is defective. The VERTEX2 does not give out a signal to it Everything works with the MS2109 |
Beta Was this translation helpful? Give feedback.
-
|
There is always such possibility but it can be easily verified: just disable for a moment HDR (and probably better to use 1080p without HDCP, no vrr of course) on the source and then you will see if MS2130 can capture the signal. Make sure the grabber is working properly in HyperHDR (status & logs). Check if the grabber can capture the signal and then just enable HDR for the same source setting (still at 1080p). I don't have a vertex2 but had a Linker 4k once, very powerful tool, I managed to work it like Ezcoo and Feintech but too much available options can be a problem sometimes. |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
Hi , I have a setup w/ Denon receiver which splits the HDMI, but once i connect the grabber i loose the HDR/ dolby vision functionality. |
Beta Was this translation helpful? Give feedback.
-
|
Hi |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for the reply. |
Beta Was this translation helpful? Give feedback.
-
|
It's probably the best solution. In the case of an HDMI splitter without CEC like EZ-SP12H2, it is probably possible to connect the TV to the Denon directly and connect the splitter to Denon second output and the grabber to the splitter. The splitter must have the EDID cloned from the TV and the grabber itself should be connected to the secondary splitter output so as not to override master EDID. But I've only tested it with dual output from PC, not Denon. I do not know how stably EDID is remembered, e.g. after turning off the power (maybe EDID forced with DIP-switches is more reliable, but should match the TV's EDID) |
Beta Was this translation helpful? Give feedback.
-
|
Thanks! |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I just received the new MS2130 and I place you LUT table in the .hyperhdr folder where the db is. How do I know is loading the LUT of that folder. I verified the logs but can't find nothing about the LUT table. |
Beta Was this translation helpful? Give feedback.
-
|
I may take a look but need your full logs (e.g. on pastebin.com). Try to enable & disable hdr then you should see the LUT path. |
Beta Was this translation helpful? Give feedback.
-
|
That work and it's loading the correct one. Thank you! |
Beta Was this translation helpful? Give feedback.
-
|
awawa-dev rocks! |
Beta Was this translation helpful? Give feedback.
-
|
Honestly I don't see why people use hperion. It just works. awawa-dev we might need to have a chat |
Beta Was this translation helpful? Give feedback.
-
|
Thanks. You can contact me by email (it's in my Github profile). |
Beta Was this translation helpful? Give feedback.
-
|
Hi I'm playing with the new MS2130 but for some reason the lights looks dim when i see the live video of the grabber in hyperhdr it look dim. I install the MS2109 and looks good. I even remove the lut calibration too see if that helps but nothing. |
Beta Was this translation helpful? Give feedback.
-
|
so set it please to 50 |
Beta Was this translation helpful? Give feedback.
-
|
|
Beta Was this translation helpful? Give feedback.
-
|
restart is needed only for 0 (defaults, do not touch control) other values are applied immediately |
Beta Was this translation helpful? Give feedback.
-
|
oh ok, well it's at 50 but still dim image |
Beta Was this translation helpful? Give feedback.
-
|
if you change it to 100 now there is a difference? |
Beta Was this translation helpful? Give feedback.
-
|
|
Beta Was this translation helpful? Give feedback.
-
|
Ohh I forgot when I found the fix I see that the colors don't look as good as the MS2109 so I install the original firmware back without the LLDV and then I start to see the beauty of the MS2130. I'm testing right now with some esp32 ethernet boards since my pi is connected to ethernet I thought will be faster than using HyperSerial. |
Beta Was this translation helpful? Give feedback.
-
|
So it was LLDV? Nice to know that ms2130 probably supports it, maybe some version of ezcoo firmware with higher nits could resolve the brightness issue. With HyperSerialESP32 working at 5Mb (cheap ESP32-S2 mini) you have already transport latency below 1ms for most configs. If you want faster solution then you can use HyperSPI: thanks to hardware accelerated SPI and high communication speed it has lower latency, probable even lower than the 100Mb ethernet solution that needs encapsulation and forwarding on the router. |
Beta Was this translation helpful? Give feedback.
-
|
No the problem is not the LLDV even with the firmware without the LLDV the problem persist the only way to make it work is to power cycle the ezcoo. What i ended up doing i connect the usb that powers the ezcoo to the tv so every time i turn off the tv the ezcoo turn off and when i turn on the tv is like if i were plugin the ezcoo to power and it work that way. Yes the only thing I'm missing with those ethernet boards is the white calibration of the lights. I don't need it right now because Im still using WS821x RGB but my next update for my HyperHDR system will be the lights you suggest. |
Beta Was this translation helpful? Give feedback.
-
|
Still not sure, some symptoms could indicate that your ezcoo had some EDID handshake problems before and for me it was jumping between HDR (brightness OK) and LLDV (dim images, even with LLDV capable firmware you need to choose correct nits/brightness version). Anyway, it's just a theory, maybe I'll borrow a Kindle Firestick to do some research for Dolby Vision and LLDV. |
Beta Was this translation helpful? Give feedback.
-
i had this exact issue after switching which USB port the capture card was plugged into--i needed to power cycle the ezcoo for everything to look normal again. good lookin' out |
Beta Was this translation helpful? Give feedback.
-
|
After reading your posts, I'm pretty sure you have a bad unit. When you order another one make SURE you order from the same seller as awawa-dev specified(I asked in a above post.) I've learnt the hard way to use the same equipment from same sellers as maintainers/creators 🤣 I can confirm I replaced my 2109 with a 2130 as a "drop in replacement" and it worked without issue. I didn't change the LUT table or any settings like saturation(left it at 128) etc as recommended from when I setup the 2109. HTH I have changed contrast/brightness/saturation/hue back to 0 now as recommended. I am using this splitter: https://www.tesmart.com/products/tesmart-hdmi-splitter-1-in-2-out-support-4k-60hz-hdr-10-hdcp-2-2?variant=43617192116436 and this matrix: https://www.aliexpress.com/item/1005004685856434.html?spm=a2g0o.order_list.order_list_main.11.26a11802T6lGsn |
Beta Was this translation helpful? Give feedback.
-
|
You can flash a custom firmware to the ms2130 and it will work normally https://zhuanlan.zhihu.com/p/634052876?utm_id=0 |
Beta Was this translation helpful? Give feedback.
-
|
@jerryngm
|
Beta Was this translation helpful? Give feedback.
-
|
@pavel-ponomarev
|
Beta Was this translation helpful? Give feedback.
-
|
Thanks for the quick response. I wonder if the colors have changed in this new firmware version and whether it is necessary to update the LUT table that @awawa-dev created. |
Beta Was this translation helpful? Give feedback.
-
|
Since I have an isolated laptop for testing purpose and two MS2130 grabbers, I decided to take a risk by using this software to upgrade a type B grabber. However, everyone must decide for themselves whether they need these modes and whether they are worth the risk. Mine is one of the first model available on Aliexpress. 3rd and 4th byte of the old firmware is C9 A9. I managed to backup the old firmware and upload the new one (4K2) without any problems. Below is a photo and details of the full list of modes found by HyperHDR under Windows. I haven't tested yet whether the calibration has changed, but EDID still doesnt report HDR capabilities. Thanks for the information @jerryngm Full mode list (click to expand): 2023-12-11T02:07:38.166Z [MEDIA_FOUNDATION:USB3.0 UHD] (MFGrabber.cpp:452) Device has 'brightness' control => min: 0, max: 100, default: 50
2023-12-11T02:07:38.169Z [MEDIA_FOUNDATION:USB3.0 UHD] (MFGrabber.cpp:459) Device has 'contrast' control => min: 0, max: 100, default: 50
2023-12-11T02:07:38.173Z [MEDIA_FOUNDATION:USB3.0 UHD] (MFGrabber.cpp:466) Device has 'saturation' control => min: 0, max: 100, default: 50
2023-12-11T02:07:38.176Z [MEDIA_FOUNDATION:USB3.0 UHD] (MFGrabber.cpp:473) Device has 'hue' control => min: 0, max: 100, default: 50
2023-12-11T02:07:38.176Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1080 @ 60 fps YUY2 (yuyv)
2023-12-11T02:07:38.176Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1080 @ 50 fps YUY2 (yuyv)
2023-12-11T02:07:38.176Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1080 @ 30 fps YUY2 (yuyv)
2023-12-11T02:07:38.176Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1080 @ 20 fps YUY2 (yuyv)
2023-12-11T02:07:38.176Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1080 @ 10 fps YUY2 (yuyv)
2023-12-11T02:07:38.176Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 3840 x 2160 @ 18 fps YUY2 (yuyv)
2023-12-11T02:07:38.176Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1600 @ 50 fps YUY2 (yuyv)
2023-12-11T02:07:38.176Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1600 @ 30 fps YUY2 (yuyv)
2023-12-11T02:07:38.176Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1600 @ 20 fps YUY2 (yuyv)
2023-12-11T02:07:38.176Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1600 @ 10 fps YUY2 (yuyv)
2023-12-11T02:07:38.176Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1440 @ 50 fps YUY2 (yuyv)
2023-12-11T02:07:38.176Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1440 @ 30 fps YUY2 (yuyv)
2023-12-11T02:07:38.176Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1440 @ 20 fps YUY2 (yuyv)
2023-12-11T02:07:38.176Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1440 @ 10 fps YUY2 (yuyv)
2023-12-11T02:07:38.176Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1152 @ 60 fps YUY2 (yuyv)
2023-12-11T02:07:38.176Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1152 @ 50 fps YUY2 (yuyv)
2023-12-11T02:07:38.176Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1152 @ 30 fps YUY2 (yuyv)
2023-12-11T02:07:38.176Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1152 @ 20 fps YUY2 (yuyv)
2023-12-11T02:07:38.176Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1152 @ 10 fps YUY2 (yuyv)
2023-12-11T02:07:38.176Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1080 @ 60 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1080 @ 50 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1080 @ 30 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1080 @ 20 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1080 @ 10 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 2160 @ 60 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 2160 @ 50 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 2160 @ 30 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 2160 @ 20 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 2160 @ 10 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1200 @ 60 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1200 @ 50 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1200 @ 30 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1200 @ 20 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1200 @ 10 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1360 x 768 @ 60 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1360 x 768 @ 50 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1360 x 768 @ 30 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1360 x 768 @ 20 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1360 x 768 @ 10 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 1024 @ 60 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 1024 @ 50 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 1024 @ 30 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 1024 @ 20 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 1024 @ 10 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 960 @ 60 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 960 @ 50 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 960 @ 30 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 960 @ 20 fps YUY2 (yuyv)
2023-12-11T02:07:38.177Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 960 @ 10 fps YUY2 (yuyv)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 720 @ 60 fps YUY2 (yuyv)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 720 @ 50 fps YUY2 (yuyv)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 720 @ 30 fps YUY2 (yuyv)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 720 @ 20 fps YUY2 (yuyv)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 720 @ 10 fps YUY2 (yuyv)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1024 x 768 @ 60 fps YUY2 (yuyv)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1024 x 768 @ 50 fps YUY2 (yuyv)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1024 x 768 @ 30 fps YUY2 (yuyv)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1024 x 768 @ 20 fps YUY2 (yuyv)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1024 x 768 @ 10 fps YUY2 (yuyv)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 720 x 480 @ 60 fps YUY2 (yuyv)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 720 x 480 @ 50 fps YUY2 (yuyv)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 720 x 480 @ 30 fps YUY2 (yuyv)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 720 x 480 @ 20 fps YUY2 (yuyv)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 720 x 480 @ 10 fps YUY2 (yuyv)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 640 x 480 @ 60 fps YUY2 (yuyv)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 640 x 480 @ 50 fps YUY2 (yuyv)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 640 x 480 @ 30 fps YUY2 (yuyv)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 640 x 480 @ 20 fps YUY2 (yuyv)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 640 x 480 @ 10 fps YUY2 (yuyv)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1080 @ 60 fps NV12 (nv12)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1080 @ 60 fps MJPG (mjpeg)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1080 @ 50 fps NV12 (nv12)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1080 @ 50 fps MJPG (mjpeg)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1080 @ 30 fps NV12 (nv12)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1080 @ 30 fps MJPG (mjpeg)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1080 @ 20 fps NV12 (nv12)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1080 @ 20 fps MJPG (mjpeg)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1080 @ 10 fps NV12 (nv12)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1080 @ 10 fps MJPG (mjpeg)
2023-12-11T02:07:38.178Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 3840 x 2160 @ 18 fps NV12 (nv12)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 3840 x 2160 @ 18 fps MJPG (mjpeg)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1600 @ 50 fps NV12 (nv12)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1600 @ 50 fps MJPG (mjpeg)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1600 @ 30 fps NV12 (nv12)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1600 @ 30 fps MJPG (mjpeg)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1600 @ 20 fps NV12 (nv12)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1600 @ 20 fps MJPG (mjpeg)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1600 @ 10 fps NV12 (nv12)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1600 @ 10 fps MJPG (mjpeg)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1440 @ 50 fps NV12 (nv12)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1440 @ 50 fps MJPG (mjpeg)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1440 @ 30 fps NV12 (nv12)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1440 @ 30 fps MJPG (mjpeg)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1440 @ 20 fps NV12 (nv12)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1440 @ 20 fps MJPG (mjpeg)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1440 @ 10 fps NV12 (nv12)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2560 x 1440 @ 10 fps MJPG (mjpeg)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1152 @ 60 fps NV12 (nv12)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1152 @ 60 fps MJPG (mjpeg)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1152 @ 50 fps NV12 (nv12)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1152 @ 50 fps MJPG (mjpeg)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1152 @ 30 fps NV12 (nv12)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1152 @ 30 fps MJPG (mjpeg)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1152 @ 20 fps NV12 (nv12)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1152 @ 20 fps MJPG (mjpeg)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1152 @ 10 fps NV12 (nv12)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1152 @ 10 fps MJPG (mjpeg)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1080 @ 60 fps NV12 (nv12)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1080 @ 60 fps MJPG (mjpeg)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1080 @ 50 fps NV12 (nv12)
2023-12-11T02:07:38.179Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1080 @ 50 fps MJPG (mjpeg)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1080 @ 30 fps NV12 (nv12)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1080 @ 30 fps MJPG (mjpeg)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1080 @ 20 fps NV12 (nv12)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1080 @ 20 fps MJPG (mjpeg)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1080 @ 10 fps NV12 (nv12)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 2048 x 1080 @ 10 fps MJPG (mjpeg)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 2160 @ 60 fps NV12 (nv12)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 2160 @ 60 fps MJPG (mjpeg)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 2160 @ 50 fps NV12 (nv12)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 2160 @ 50 fps MJPG (mjpeg)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 2160 @ 30 fps NV12 (nv12)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 2160 @ 30 fps MJPG (mjpeg)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 2160 @ 20 fps NV12 (nv12)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 2160 @ 20 fps MJPG (mjpeg)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 2160 @ 10 fps NV12 (nv12)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 2160 @ 10 fps MJPG (mjpeg)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1200 @ 60 fps NV12 (nv12)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1200 @ 60 fps MJPG (mjpeg)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1200 @ 50 fps NV12 (nv12)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1200 @ 50 fps MJPG (mjpeg)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1200 @ 30 fps NV12 (nv12)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1200 @ 30 fps MJPG (mjpeg)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1200 @ 20 fps NV12 (nv12)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1200 @ 20 fps MJPG (mjpeg)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1200 @ 10 fps NV12 (nv12)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1920 x 1200 @ 10 fps MJPG (mjpeg)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1360 x 768 @ 60 fps NV12 (nv12)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1360 x 768 @ 60 fps MJPG (mjpeg)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1360 x 768 @ 50 fps NV12 (nv12)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1360 x 768 @ 50 fps MJPG (mjpeg)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1360 x 768 @ 30 fps NV12 (nv12)
2023-12-11T02:07:38.180Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1360 x 768 @ 30 fps MJPG (mjpeg)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1360 x 768 @ 20 fps NV12 (nv12)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1360 x 768 @ 20 fps MJPG (mjpeg)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1360 x 768 @ 10 fps NV12 (nv12)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1360 x 768 @ 10 fps MJPG (mjpeg)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 1024 @ 60 fps NV12 (nv12)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 1024 @ 60 fps MJPG (mjpeg)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 1024 @ 50 fps NV12 (nv12)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 1024 @ 50 fps MJPG (mjpeg)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 1024 @ 30 fps NV12 (nv12)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 1024 @ 30 fps MJPG (mjpeg)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 1024 @ 20 fps NV12 (nv12)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 1024 @ 20 fps MJPG (mjpeg)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 1024 @ 10 fps NV12 (nv12)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 1024 @ 10 fps MJPG (mjpeg)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 960 @ 60 fps NV12 (nv12)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 960 @ 60 fps MJPG (mjpeg)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 960 @ 50 fps NV12 (nv12)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 960 @ 50 fps MJPG (mjpeg)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 960 @ 30 fps NV12 (nv12)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 960 @ 30 fps MJPG (mjpeg)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 960 @ 20 fps NV12 (nv12)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 960 @ 20 fps MJPG (mjpeg)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 960 @ 10 fps NV12 (nv12)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 960 @ 10 fps MJPG (mjpeg)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 720 @ 60 fps NV12 (nv12)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 720 @ 60 fps MJPG (mjpeg)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 720 @ 50 fps NV12 (nv12)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 720 @ 50 fps MJPG (mjpeg)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 720 @ 30 fps NV12 (nv12)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 720 @ 30 fps MJPG (mjpeg)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 720 @ 20 fps NV12 (nv12)
2023-12-11T02:07:38.181Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 720 @ 20 fps MJPG (mjpeg)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 720 @ 10 fps NV12 (nv12)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1280 x 720 @ 10 fps MJPG (mjpeg)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1024 x 768 @ 60 fps NV12 (nv12)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1024 x 768 @ 60 fps MJPG (mjpeg)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1024 x 768 @ 50 fps NV12 (nv12)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1024 x 768 @ 50 fps MJPG (mjpeg)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1024 x 768 @ 30 fps NV12 (nv12)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1024 x 768 @ 30 fps MJPG (mjpeg)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1024 x 768 @ 20 fps NV12 (nv12)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1024 x 768 @ 20 fps MJPG (mjpeg)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1024 x 768 @ 10 fps NV12 (nv12)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 1024 x 768 @ 10 fps MJPG (mjpeg)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 720 x 480 @ 60 fps NV12 (nv12)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 720 x 480 @ 60 fps MJPG (mjpeg)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 720 x 480 @ 50 fps NV12 (nv12)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 720 x 480 @ 50 fps MJPG (mjpeg)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 720 x 480 @ 30 fps NV12 (nv12)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 720 x 480 @ 30 fps MJPG (mjpeg)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 720 x 480 @ 20 fps NV12 (nv12)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 720 x 480 @ 20 fps MJPG (mjpeg)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 720 x 480 @ 10 fps NV12 (nv12)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 720 x 480 @ 10 fps MJPG (mjpeg)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 640 x 480 @ 60 fps NV12 (nv12)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 640 x 480 @ 60 fps MJPG (mjpeg)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 640 x 480 @ 50 fps NV12 (nv12)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 640 x 480 @ 50 fps MJPG (mjpeg)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 640 x 480 @ 30 fps NV12 (nv12)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 640 x 480 @ 30 fps MJPG (mjpeg)
2023-12-11T02:07:38.182Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 640 x 480 @ 20 fps NV12 (nv12)
2023-12-11T02:07:38.183Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 640 x 480 @ 20 fps MJPG (mjpeg)
2023-12-11T02:07:38.183Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 640 x 480 @ 10 fps NV12 (nv12)
2023-12-11T02:07:38.183Z [MEDIA_FOUNDATION:USB3.0 UHD] USB3.0 UHD 640 x 480 @ 10 fps MJPG (mjpeg)HyperHDR v19 (Windows 10) |
Beta Was this translation helpful? Give feedback.
-
|
Does anyone have a sample screenshot of MJPG 1440p or 1600p? I'm experiencing artifacts with this Superdisplay (alternative solution) app. I'm guessing they come from encoding and compressing aswell. One pic is with VNC (no compression) and the other Superdisplay. If the MS2130 running MJPG looks a lot better than this I might try it dispite running MJPG. Thanks!
|
Beta Was this translation helpful? Give feedback.
-
|
A side question about the MS2130 is about its audio. Is it stable, without glitches and in sync with the video stream? |
Beta Was this translation helpful? Give feedback.
-
|
Will a USB-C 3.1 port suffice for 1600p50 YUV? Thanks for the help. I'm trying to figure out if an MS2130 will work or not. |
Beta Was this translation helpful? Give feedback.
-
|
Ahh I see. I know you guys have a different goal in mind. I don't want to save anything. Just display it. Basically using usb3.0 tablets as hdmi monitors at their native resolution. |
Beta Was this translation helpful? Give feedback.
-
|
Goal is to simplify system for HyperHDR. |
Beta Was this translation helpful? Give feedback.
-
|
@alcatraz-zz new high-resolution firmware that allows capturing in higher than 1080p format offers poor quality with bad bright colors and contrast so it affects every user case scenario, not only our app. |
Beta Was this translation helpful? Give feedback.
-
|
I've completely read the entire thread. I bought a MS2131, without giving it much thought and reading up on it. But I guess it is safe to say it is not really a great product, right? Even the pass-through function doesn't work well for HyperHDR. The grabber/capture card you were referring to (@awawa-dev ) https://nl.aliexpress.com/item/1005006024264405.html, would that, although being 3 times as expensive (50 eur compared to 12 eur) be a better fit? |
Beta Was this translation helpful? Give feedback.
-
|
The current status is that we can update MS2131 EDID to accept HDR, but this only works when we do not use pass-through. And it behaves similarly to MS2130. However, when we connect the HDMI OUTPUT, the MS2131 dynamically generates a new EDID (ignoring the EDID from the firmware) without information about HDR. It seems that a more significant intervention in the firmware is needed to prevent it from doing this. maybe one of the manufacturers will release their own version of the firmware, as was the case with ms2130? The second product is still in transit, it looks strange, maybe they lost it or didn't actually send it. |
Beta Was this translation helpful? Give feedback.
-
|
@frofro64546 wrote:
f3 firmware is based on the oldest firmware with just replaced EDID. I did not test whether anything changed during calibration, but there was no visible changes (besides fixing the lower brightness issue) during my Dolby Vision test: #729 (comment) |
Beta Was this translation helpful? Give feedback.
-
|
Novice here. Most of what is being talked about is going right over my head currently cause I am still learning. With that in mind, my question is since the MS2130 is having LUT issues (hopefully I said that right) is it still the recommended capture hardware? Can I use it to capture content being played by Netflix and Disney+ on my 2019 Nvidia Shield Pro? My current set up is Nvidia Shield Pro 2019 running Hyperion Grabber playing to a Samsung Q990b connected to my Samsung S95B over EARC. Hyperion Grabber is streaming color data to a HyperHDR docker container on my Unraid server. Is using a MS2130 my best choice for the capturing ALL video content being played by my Shield? |
Beta Was this translation helpful? Give feedback.
-
|
Yes, the ms2130 is still the best budget grabber. I still have and use Elgato HD60X, which allows me to get rid of the HDMI splitter, but my video source does not use HDCP, which is an obstacle for many people. And thanks to HDCP and closed Dolby Vision, there is no such think as one universal grabber: although the former can be bypassed with a splitter and also the latter by forcing LLDV. I don't have Shield but if, from what I know, SDR and HDR should work although it only uses limited YUV, you have to select the appropriate LUT to download and the grabber may have problems with the newer firmware (downgrade required in such a case), calibration on it may not work because the browser from what I saw, it does not respect the default rendering of the test board in sRGB range but it is not critical. |
Beta Was this translation helpful? Give feedback.
-
Oh boy, the Elgato HD60X says it supports 10 bit do you know about if it does 12 bit? I have been using the MS2130 since August and it works perfectly for most things. It is missing 10-12 bit, HDR, and VRR though. I am willing to upgrade to a more expensive one if it can support that. Any issues with it? |
Beta Was this translation helpful? Give feedback.
-
|
After you opened HyperHDR you can adjust Brightness/Contrast/Hue/Saturation via Elgato 4K utility. |
Beta Was this translation helpful? Give feedback.
-
|
I want the HDR Tonemapping options off in the Elgato utility, right? |
Beta Was this translation helpful? Give feedback.
-
|
You need to enable HDR Tonemapping if you plan to use HDR. If this isn't enabled you get the typical washed out Picture. Are you using the native Elgato HDR? If yes, disable HDR Tonemapping in HyperHDR since it's not needed anymore. You don't need a LUT too |
Beta Was this translation helpful? Give feedback.
-
|
Well I'm trying to decide which one I should use, heh. |
Beta Was this translation helpful? Give feedback.
-
|
OK, just compared the two. The HyderHDR with LUT is way more accurate but I would have to switch it every time manually. |
Beta Was this translation helpful? Give feedback.
-
|
Weird, Dolby vision was being capture just fine for days now it looks like this all of the sudden. Any ideas why? @NatyaSadella |
Beta Was this translation helpful? Give feedback.
-
|
Looks like the DV Signal is transferred over to Elgato. Happens when you set the scaler to "Off". This would be the first thing to look for |
Beta Was this translation helpful? Give feedback.
-
|
My splitter is definitely in the 1080 mode if that is what you are referring to |
Beta Was this translation helpful? Give feedback.
-
|
Fixed it, needed to enable LLDV on my shield in the developer settings and now it works again :D |
Beta Was this translation helpful? Give feedback.
-
|
Hi @awawa-dev, Have an issue with HyperHDR v20 receiving no signal from Apple TV 4k after ATV goes into standby. If I wake it up, HyperHDR reports "No Signal" if I stay in the same app, but if I switch apps HyperHDR picks up the signal after a few seconds. Wondering if this is an issue with HyperHDR or something else? The TV picks up on the signal fine and the light on HDMI2 on the splitter is lit. My setup: Also, is there any custom firmware that you know of for the SP12H21 splitter? I wasn't able to find any. |
Beta Was this translation helpful? Give feedback.
-
|
Hi |
Beta Was this translation helpful? Give feedback.
-
|
Seems the ATV has a known issue (for years) that even affects some TVs. After waking up it doesn't send signal (or at least not one that some devices can detect). My TV doesn't seem to be affected, but the grabber (I'm guessing) does appear to be. I'll keep playing with it. https://discussions.apple.com/thread/250327909?sortBy=best There's more, but those are some examples. |
Beta Was this translation helpful? Give feedback.
-
|
Correct, switching the app in ATV makes the grabber work again. I'll disable signal loss detection, as the ATV signal is black when it's sleeping, and see if that helps. Will also keep an eye on the logs |
Beta Was this translation helpful? Give feedback.
-
|
@jpleasants I have an Apple TV 4k 2nd generation, the grabber and the splitter are the same but the TV I use is an LG with DV. Using HyperHDRv20 with no problems at all. |
Beta Was this translation helpful? Give feedback.
-
|
Do you happen to use CEC on your Apple TV? Also do you use the custom firmware on your MS2130?
Get Outlook for iOS<https://aka.ms/o0ukef>
…________________________________
From: appleimperio ***@***.***>
Sent: Wednesday, April 10, 2024 10:27:52 AM
To: awawa-dev/HyperHDR ***@***.***>
Cc: jpleasants ***@***.***>; Mention ***@***.***>
Subject: Re: [awawa-dev/HyperHDR] Video grabber MS2130: the good old MS2109 on steroids. At least it was... :confused: (Discussion #499)
@jpleasants<https://github.com/jpleasants> I have an Apple TV 4k 2nd generation, the grabber and the splitter are the same but the TV I use is an LG with DV. Using HyperHDRv20 with no problems at all.
—
Reply to this email directly, view it on GitHub<#499 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AEPC4PLVXIYIDYNWRYXTSJTY4VD6RAVCNFSM6AAAAAAUW245BGVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TANZSGIZTA>.
You are receiving this because you were mentioned.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
No CEC on the Apple TV and yes custom firmware on the MS2130 |
Beta Was this translation helpful? Give feedback.
-
|
Have you had to make any changes to anything in Apple TV or HyperHDR to get HyperHDR to see the signal every single time? If I turn off the Apple TV and turn it back on, there's about a 50% chance HyperHDR won't receive the signal. Same for sleeping and waking up or even switching apps. I have 4K SDR selected in Apple TV with 'Match Range' enabled and 'Match Frame Rate' disabled. I've tried disabling CEC in Apple TV, tried with 4K HDR10+ and 4K SDR with 'Match Range' and 'Match Frame Rate' both enabled/disabled and variations of those. Nothing I seem to do results in a reliable signal to HyperHDR. Didn't have these problems with Nvidia Shield :( |
Beta Was this translation helpful? Give feedback.
-
|
I have Match Content off and the format 4k Dolby Vision |
Beta Was this translation helpful? Give feedback.
-
|
@awawa-dev So with the new exploit on LG TVs that lets you install homebrew on even the newest versions https://github.com/throwaway96/dejavuln-autoroot I can now run PicCap on my LG TV and capture everything straight from the TV. This should theoretically let me be able to capture anything. I can now capture TV Led Dolby Vision instead of just LLDV which is probably the best advantage. Are there any disadvantages of this method vs the Elgato HD60X w/ splitter? I think I could save quite a bit of power without running the splitter, capture device, and HPTC. |
Beta Was this translation helpful? Give feedback.
-
|
Received my Grabber today. has firmware (3rd/4th byte) FB A0. I have backed it up if its of any use ill upload it |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I'm hoping someone can help my figure out which part of my setup isn't working correctly, as I bought hardware that it seemed like worked for multiple other users without any issue. Here is the setup: Nvidia Shield TV Pro -> EZCOO EZ-SP12HAS splitter The issue is the live video preview is just a black screen under most conditions. By changing the display mode on the Shield TV I can get it to work, but never at the right setting. SEE BELOW COMMENT FOR UPDATED INFORMATION ON MODES THAT WORK If I connect HDMI 2 on the splitter to a 1080p60 computer monitor and turn the scaler on, the monitor displays the image just fine. I'm at a complete loss why the splitter seems to output 1080p60 just fine but the grabber can't see it, even though the grabber can see a native 1080p60 image just fine. I would be very grateful for any help someone can provide; I've already sunk a decent amount of money into this setup with confidence that it would work but I'm now at my wits' end. Cheers. |
Beta Was this translation helpful? Give feedback.
-
|
Yeah 10 bit is different than HDR, The grabber receives non HDR signals and the software on the rpi changes their colors back to HDR. After you change the resolution you should be able to go to advanced display settings and enable HDR again. You can also toggle DV on the previous menu to enable that as well. On your splitter you should be using the 1080p downscaler to your capture card too. |
Beta Was this translation helpful? Give feedback.
-
|
Hmm okay thanks for your help! It seems like enabling Dolby Vision forces the display mode back to a higher bit rate and doesn't work, but I'm willing not to use that. I'll have to test with actual HDR content after work today. A curiosity I notice though, the 1080p60 mode that works is a 12-bit mode. Still seems confusing to me that it would work but 4K 12-bit with the scaler on doesn't work. End result should be the same? Anyway, there are a ton of other options to choose from and I'm not sure exactly what difference they would make. |
Beta Was this translation helpful? Give feedback.
-
|
I always set it to 4k 23.976hz since that is the refresh rate of nearly all tv shows and movies. It will still change to wte the content is if its refresh rate is higher but there is always a delay when a TV changes refresh rates. I wonder if you are missing the video modes because of your splitter. I have the newer version of yours without the audio out it seems, https://www.amazon.com/gp/product/B0B7W94LHB . I would also check to see if there is a firmware update for yours. Lots of EZCOO products don't work as advertised till their firmware is updated, mine wouldn't do VRR till it was. |
Beta Was this translation helpful? Give feedback.
-
|
If it were the splitter that would be annoying for sure. I went with the cheapest one that said it had all the features I needed, as anything more seemed like wasting money at the time. This project already ballooned in cost when I started looking for a splitter that would support CEC specifically, compared to the guides that initially turned me onto the idea where they weren't worried about that. It doesn't look like the firmware can be updated on mine. There's no external USB port like the one you linked. I gave 24/30Hz modes a shot but that definitely doesn't work for me. The menus are painfully slow to respond and I watch as much, if not more, YouTube than TV and movies. In YT at least it doesn't seem to switch refresh rates and playback is choppy and unwatchable. You're a lifesaver though! Hopefully 8 bit isn't a noticeable difference from what I was using before and this is all fine. It'll be a while before I can finish everything as this upgrade is also part of a new custom entertainment cabinet that I won't have finished for another month or two. I just wanted to make sure all the hardware was going to work before my return windows closed. |
Beta Was this translation helpful? Give feedback.
-
|
Not saying this is the answer, have you tried a different hdmi cable? Just to rule it out. |
Beta Was this translation helpful? Give feedback.
and others
-
Preview of new MS2130 true USB3.0 grabber. Full review will be posted later on my blog after more testing, including various OS.
Purchased here: link (model B). It's amazing cheap... still under $10 like the old MS2109.
Caution
There is an important update #499 (comment) 😡
You can't use our LUTs for MS2130 grabber using newer firmware and you need to calibrate LUT yourself.
You can recognize the old firmware by the modes offered: when connected to USB2.0 → only MJPEG (and NV12 under Windows), USB3.0 → only YUV.
Note
Our small firmware reasearch project: #499 (comment)
The HDR LUT calibration result is excellent: 352, even better than old MS2109: 566 (the lower score is better). BTW, this shows that USB grabbers are in a completely different league than, for example, LG webos capturing after rooting, for which even after calibration the error is huge and oscillates around 24000-26000. Without using calibration or using Oklab hocus-pocus instead, which is not it was intended for HDR correction or even that color-space, the color reproduction is definitely even worse.
You need to use HyperHDR in order to fully utilize its capabilities even for SDR because of quite rare full YUV range and FCC YUV coef. And of course for HDR using calibrated & dedicated LUT table.
Recommended & the easiest way to install LUTs for MS2130 (need latest HyperHDR v20beta, otherwise install it manually)
Dedicated LUT table for SDR & HDR (beta version, YUV calibration)
Contrary to the old MS2109, you don't need to modify contrast, brightness or saturation. Just leave it on defaults which means 0 for contrast/brightness/saturation/hue in HyperHDR grabber configuration. If there were other values set before, you need to restart Raspberry Pi/PC afterwards to apply new settings.
If you use USB2.0 port and MJPEG choose the LUT for MJPEG that can be found at the bottom of the page
Download it here (use 7-zip): ms2130.tar.zip
The calibration was done using Windows 10, 1080p24, HDR 12 bit RGB, grabber: PC USB3.0 port YUV at 1080p30
2023-02-09T17:28:21.092Z [CALIBRATOR] (LutCalibrator.cpp:896) Mean error for FCC is: 352.185489
2023-02-09T17:28:21.092Z [CALIBRATOR] (LutCalibrator.cpp:896) Mean error for REC.709 is: 5587.897734
2023-02-09T17:28:21.092Z [CALIBRATOR] (LutCalibrator.cpp:896) Mean error for REC.601 is: 561.666046
Full detailed calibration log is below:
2023-02-09T17:28:21.092Z [CALIBRATOR] Best coef is: FCC
2023-02-09T17:28:21.092Z [CALIBRATOR] Requesting next coef for switching: FCC
2023-02-09T17:28:22.119Z [CALIBRATOR] (LutCalibrator.cpp:1217) ----------------- Preparing and saving LUT table --------------------
2023-02-09T17:28:22.119Z [CALIBRATOR] (LutCalibrator.cpp:1218) Initial mode: YES
2023-02-09T17:28:22.120Z [CALIBRATOR] (LutCalibrator.cpp:1219) Using YUV coefs: FCC
2023-02-09T17:28:22.120Z [CALIBRATOR] (LutCalibrator.cpp:1220) YUV table range: FULL
2023-02-09T17:28:22.138Z [CALIBRATOR] (LutCalibrator.cpp:1231) LUT RGB HDR table (1/3) is ready
2023-02-09T17:28:22.157Z [CALIBRATOR] (LutCalibrator.cpp:1269) LUT YUV HDR table (2/3) is ready
2023-02-09T17:28:22.550Z [CALIBRATOR] (LutCalibrator.cpp:1300) LUT YUV table (3/3) is ready
2023-02-09T17:28:22.550Z [CALIBRATOR] (LutCalibrator.cpp:1305) ---------------------- LUT table is saved -----------------------
2023-02-09T17:28:34.488Z [CALIBRATOR] (LutCalibrator.cpp:789) --------------------- Captured colors starts ---------------------
2023-02-09T17:28:34.488Z [CALIBRATOR] (LutCalibrator.cpp:790) Red: (255,0,0) => (135, 86, 54)
2023-02-09T17:28:34.488Z [CALIBRATOR] (LutCalibrator.cpp:791) Green: (0,255,0) => (119, 148, 89)
2023-02-09T17:28:34.488Z [CALIBRATOR] (LutCalibrator.cpp:792) Blue: (0,0,255) => (72, 54, 144)
2023-02-09T17:28:34.488Z [CALIBRATOR] (LutCalibrator.cpp:793) Yellow: (255,255,0) => (146, 151, 91)
2023-02-09T17:28:34.488Z [CALIBRATOR] (LutCalibrator.cpp:794) Magenta: (255,0,255) => (136, 89, 143)
2023-02-09T17:28:34.488Z [CALIBRATOR] (LutCalibrator.cpp:795) Cyan: (0,255,255) => (122, 148, 145)
2023-02-09T17:28:34.488Z [CALIBRATOR] (LutCalibrator.cpp:796) Orange: (255,128,0) => (138, 117, 70)
2023-02-09T17:28:34.489Z [CALIBRATOR] (LutCalibrator.cpp:797) Pink: (255,0,128) => (135, 86, 107)
2023-02-09T17:28:34.489Z [CALIBRATOR] (LutCalibrator.cpp:798) Azure: (0,128,255) => (94, 111, 143)
2023-02-09T17:28:34.489Z [CALIBRATOR] (LutCalibrator.cpp:799) Brown: (128,64,0) => (100, 82, 44)
2023-02-09T17:28:34.489Z [CALIBRATOR] (LutCalibrator.cpp:800) Purple: (128,0,64) => (96, 58, 75)
2023-02-09T17:28:34.489Z [CALIBRATOR] (LutCalibrator.cpp:801) Low red: (128,0,0) => (96, 55, 33)
2023-02-09T17:28:34.489Z [CALIBRATOR] (LutCalibrator.cpp:802) Low green: (0,128,0) => (82, 108, 58)
2023-02-09T17:28:34.489Z [CALIBRATOR] (LutCalibrator.cpp:803) Low blue: (0,0,128) => (44, 33, 105)
2023-02-09T17:28:34.489Z [CALIBRATOR] (LutCalibrator.cpp:804) LowestGray: (16,16,16) => (39, 39, 39)
2023-02-09T17:28:34.489Z [CALIBRATOR] (LutCalibrator.cpp:805) Gray1: (32,32,32) => (53, 55, 52)
2023-02-09T17:28:34.489Z [CALIBRATOR] (LutCalibrator.cpp:806) Gray2: (48,48,48) => (66, 68, 65)
2023-02-09T17:28:34.490Z [CALIBRATOR] (LutCalibrator.cpp:807) Gray3: (64,64,64) => (78, 78, 78)
2023-02-09T17:28:34.490Z [CALIBRATOR] (LutCalibrator.cpp:808) Gray4: (96,96,96) => (94, 96, 93)
2023-02-09T17:28:34.490Z [CALIBRATOR] (LutCalibrator.cpp:809) Gray5: (120,120,120) => (105, 107, 104)
2023-02-09T17:28:34.490Z [CALIBRATOR] (LutCalibrator.cpp:810) Gray6: (144,144,144) => (115, 117, 114)
2023-02-09T17:28:34.490Z [CALIBRATOR] (LutCalibrator.cpp:811) Gray7: (172,172,172) => (125, 127, 124)
2023-02-09T17:28:34.490Z [CALIBRATOR] (LutCalibrator.cpp:812) Gray8: (196,196,196) => (132, 134, 131)
2023-02-09T17:28:34.490Z [CALIBRATOR] (LutCalibrator.cpp:813) HighestGray: (220,220,220) => (139, 141, 138)
2023-02-09T17:28:34.490Z [CALIBRATOR] (LutCalibrator.cpp:814) White: (255,255,255) => (148, 150, 147)
2023-02-09T17:28:34.490Z [CALIBRATOR] (LutCalibrator.cpp:815) ------------------------------------------------------------------
2023-02-09T17:28:34.490Z [CALIBRATOR] (LutCalibrator.cpp:816)
2023-02-09T17:28:34.491Z [CALIBRATOR] (LutCalibrator.cpp:931) Optimal PQ multi => 33.000000, strategy => 0, white index => 21
2023-02-09T17:28:34.491Z [CALIBRATOR] (LutCalibrator.cpp:932) White correction: (1.016000, 1.000000, 1.024194)
2023-02-09T17:28:34.491Z [CALIBRATOR] (LutCalibrator.cpp:933) Min RGB floor: 0.000000, max RGB ceiling: 147.000000, scale: 240.000000
2023-02-09T17:28:34.491Z [CALIBRATOR] (LutCalibrator.cpp:934) Min RGB range => (0,0,0)
2023-02-09T17:28:34.491Z [CALIBRATOR] (LutCalibrator.cpp:935) Max RGB range => (148,150,147)
2023-02-09T17:28:34.491Z [CALIBRATOR] (LutCalibrator.cpp:936) YUV range: FULL
2023-02-09T17:28:34.491Z [CALIBRATOR] (LutCalibrator.cpp:937) YUV coefs: FCC
2023-02-09T17:28:40.274Z [CALIBRATOR] (LutCalibrator.cpp:821)
2023-02-09T17:28:40.274Z [CALIBRATOR] (LutCalibrator.cpp:822) -------------------- Calibrated colors starts --------------------
2023-02-09T17:28:40.274Z [CALIBRATOR] (LutCalibrator.cpp:823) Red: (255,0,0) => (253,0,0)
2023-02-09T17:28:40.275Z [CALIBRATOR] (LutCalibrator.cpp:824) Green: (0,255,0) => (0,255,0)
2023-02-09T17:28:40.275Z [CALIBRATOR] (LutCalibrator.cpp:825) Blue: (0,0,255) => (0,4,255)
2023-02-09T17:28:40.275Z [CALIBRATOR] (LutCalibrator.cpp:826) Yellow: (255,255,0) => (250,255,0)
2023-02-09T17:28:40.275Z [CALIBRATOR] (LutCalibrator.cpp:827) Magenta: (255,0,255) => (249,2,252)
2023-02-09T17:28:40.275Z [CALIBRATOR] (LutCalibrator.cpp:828) Cyan: (0,255,255) => (0,255,252)
2023-02-09T17:28:40.275Z [CALIBRATOR] (LutCalibrator.cpp:829) Orange: (255,128,0) => (254,128,0)
2023-02-09T17:28:40.275Z [CALIBRATOR] (LutCalibrator.cpp:830) Pink: (255,0,128) => (251,0,124)
2023-02-09T17:28:40.275Z [CALIBRATOR] (LutCalibrator.cpp:831) Azure: (0,128,255) => (0,128,252)
2023-02-09T17:28:40.275Z [CALIBRATOR] (LutCalibrator.cpp:832) Brown: (128,64,0) => (122,60,0)
2023-02-09T17:28:40.275Z [CALIBRATOR] (LutCalibrator.cpp:833) Purple: (128,0,64) => (117,8,59)
2023-02-09T17:28:40.276Z [CALIBRATOR] (LutCalibrator.cpp:834) Low red: (128,0,0) => (119,0,0)
2023-02-09T17:28:40.276Z [CALIBRATOR] (LutCalibrator.cpp:835) Low green: (0,128,0) => (0,123,0)
2023-02-09T17:28:40.276Z [CALIBRATOR] (LutCalibrator.cpp:836) Low blue: (0,0,128) => (0,2,124)
2023-02-09T17:28:40.276Z [CALIBRATOR] (LutCalibrator.cpp:837) LowestGray: (16,16,16) => (14,14,14)
2023-02-09T17:28:40.276Z [CALIBRATOR] (LutCalibrator.cpp:838) Gray1: (32,32,32) => (28,28,28)
2023-02-09T17:28:40.276Z [CALIBRATOR] (LutCalibrator.cpp:839) Gray2: (48,48,48) => (44,44,44)
2023-02-09T17:28:40.276Z [CALIBRATOR] (LutCalibrator.cpp:840) Gray3: (64,64,64) => (62,62,62)
2023-02-09T17:28:40.276Z [CALIBRATOR] (LutCalibrator.cpp:841) Gray4: (96,96,96) => (91,91,91)
2023-02-09T17:28:40.276Z [CALIBRATOR] (LutCalibrator.cpp:842) Gray5: (120,120,120) => (115,115,115)
2023-02-09T17:28:40.276Z [CALIBRATOR] (LutCalibrator.cpp:843) Gray6: (144,144,144) => (141,141,141)
2023-02-09T17:28:40.277Z [CALIBRATOR] (LutCalibrator.cpp:844) Gray7: (172,172,172) => (171,171,171)
2023-02-09T17:28:40.277Z [CALIBRATOR] (LutCalibrator.cpp:845) Gray8: (196,196,196) => (195,195,195)
2023-02-09T17:28:40.277Z [CALIBRATOR] (LutCalibrator.cpp:846) HighestGray: (220,220,220) => (221,221,221)
2023-02-09T17:28:40.277Z [CALIBRATOR] (LutCalibrator.cpp:847) White: (255,255,255) => (255,255,255)
2023-02-09T17:28:40.277Z [CALIBRATOR] (LutCalibrator.cpp:848) ------------------------------------------------------------------
2023-02-09T17:28:40.277Z [CALIBRATOR] (LutCalibrator.cpp:849)
2023-02-09T17:28:40.285Z [CALIBRATOR] (LutCalibrator.cpp:1217) ----------------- Preparing and saving LUT table --------------------
2023-02-09T17:28:40.285Z [CALIBRATOR] (LutCalibrator.cpp:1218) Initial mode: NO
2023-02-09T17:28:40.285Z [CALIBRATOR] (LutCalibrator.cpp:1219) Using YUV coefs: FCC
2023-02-09T17:28:40.285Z [CALIBRATOR] (LutCalibrator.cpp:1220) YUV table range: FULL
2023-02-09T17:28:40.285Z [CALIBRATOR] (LutCalibrator.cpp:1224) Min RGB floor: 0.000000, max RGB ceiling: 147.000000
2023-02-09T17:28:40.285Z [CALIBRATOR] (LutCalibrator.cpp:1225) Delta RGB range => 147.000000
2023-02-09T17:28:40.285Z [CALIBRATOR] (LutCalibrator.cpp:1226) Min RGB range => (0,0,0)
2023-02-09T17:28:40.285Z [CALIBRATOR] (LutCalibrator.cpp:1227) Max RGB range => (148,150,147)
2023-02-09T17:28:40.304Z [CALIBRATOR] (LutCalibrator.cpp:1231) LUT RGB HDR table (1/3) is ready
2023-02-09T17:28:40.763Z [CALIBRATOR] (LutCalibrator.cpp:1269) LUT YUV HDR table (2/3) is ready
2023-02-09T17:28:41.144Z [CALIBRATOR] (LutCalibrator.cpp:1300) LUT YUV table (3/3) is ready
2023-02-09T17:28:41.145Z [CALIBRATOR] (LutCalibrator.cpp:1305) ---------------------- LUT table is saved -----------------------
Model A from the same seller. Exactly the same result, which wasn't so obvious before.
2023-02-13T18:40:34.767Z [CALIBRATOR] (LutCalibrator.cpp:896) Mean error for FCC is: 352.185489
2023-02-13T18:40:34.767Z [CALIBRATOR] (LutCalibrator.cpp:896) Mean error for REC.709 is: 5587.897734
2023-02-13T18:40:34.767Z [CALIBRATOR] (LutCalibrator.cpp:896) Mean error for REC.601 is: 561.666046
2023-02-13T18:40:34.767Z [CALIBRATOR] Best coef is: FCC
2023-02-13T18:40:34.767Z [CALIBRATOR] Requesting next coef for switching: FCC
2023-02-13T18:40:48.109Z [CALIBRATOR] (LutCalibrator.cpp:789) --------------------- Captured colors starts ---------------------
2023-02-13T18:40:48.109Z [CALIBRATOR] (LutCalibrator.cpp:790) Red: (255,0,0) => (135, 86, 54)
2023-02-13T18:40:48.109Z [CALIBRATOR] (LutCalibrator.cpp:791) Green: (0,255,0) => (119, 148, 89)
2023-02-13T18:40:48.109Z [CALIBRATOR] (LutCalibrator.cpp:792) Blue: (0,0,255) => (72, 54, 144)
2023-02-13T18:40:48.109Z [CALIBRATOR] (LutCalibrator.cpp:793) Yellow: (255,255,0) => (146, 151, 91)
2023-02-13T18:40:48.109Z [CALIBRATOR] (LutCalibrator.cpp:794) Magenta: (255,0,255) => (136, 89, 143)
2023-02-13T18:40:48.109Z [CALIBRATOR] (LutCalibrator.cpp:795) Cyan: (0,255,255) => (122, 148, 145)
2023-02-13T18:40:48.109Z [CALIBRATOR] (LutCalibrator.cpp:796) Orange: (255,128,0) => (138, 117, 70)
2023-02-13T18:40:48.109Z [CALIBRATOR] (LutCalibrator.cpp:797) Pink: (255,0,128) => (135, 86, 107)
2023-02-13T18:40:48.110Z [CALIBRATOR] (LutCalibrator.cpp:798) Azure: (0,128,255) => (94, 111, 143)
2023-02-13T18:40:48.110Z [CALIBRATOR] (LutCalibrator.cpp:799) Brown: (128,64,0) => (100, 82, 44)
2023-02-13T18:40:48.110Z [CALIBRATOR] (LutCalibrator.cpp:800) Purple: (128,0,64) => (96, 58, 75)
2023-02-13T18:40:48.110Z [CALIBRATOR] (LutCalibrator.cpp:801) Low red: (128,0,0) => (96, 55, 33)
2023-02-13T18:40:48.110Z [CALIBRATOR] (LutCalibrator.cpp:802) Low green: (0,128,0) => (82, 108, 58)
2023-02-13T18:40:48.110Z [CALIBRATOR] (LutCalibrator.cpp:803) Low blue: (0,0,128) => (44, 33, 105)
2023-02-13T18:40:48.110Z [CALIBRATOR] (LutCalibrator.cpp:804) LowestGray: (16,16,16) => (39, 39, 39)
2023-02-13T18:40:48.110Z [CALIBRATOR] (LutCalibrator.cpp:805) Gray1: (32,32,32) => (53, 55, 52)
2023-02-13T18:40:48.110Z [CALIBRATOR] (LutCalibrator.cpp:806) Gray2: (48,48,48) => (66, 68, 65)
2023-02-13T18:40:48.110Z [CALIBRATOR] (LutCalibrator.cpp:807) Gray3: (64,64,64) => (78, 78, 78)
2023-02-13T18:40:48.111Z [CALIBRATOR] (LutCalibrator.cpp:808) Gray4: (96,96,96) => (94, 96, 93)
2023-02-13T18:40:48.111Z [CALIBRATOR] (LutCalibrator.cpp:809) Gray5: (120,120,120) => (105, 107, 104)
2023-02-13T18:40:48.111Z [CALIBRATOR] (LutCalibrator.cpp:810) Gray6: (144,144,144) => (115, 117, 114)
2023-02-13T18:40:48.111Z [CALIBRATOR] (LutCalibrator.cpp:811) Gray7: (172,172,172) => (125, 127, 124)
2023-02-13T18:40:48.111Z [CALIBRATOR] (LutCalibrator.cpp:812) Gray8: (196,196,196) => (132, 134, 131)
2023-02-13T18:40:48.111Z [CALIBRATOR] (LutCalibrator.cpp:813) HighestGray: (220,220,220) => (139, 141, 138)
2023-02-13T18:40:48.111Z [CALIBRATOR] (LutCalibrator.cpp:814) White: (255,255,255) => (148, 150, 147)
2023-02-13T18:40:48.111Z [CALIBRATOR] (LutCalibrator.cpp:815) ------------------------------------------------------------------
2023-02-13T18:40:48.111Z [CALIBRATOR] (LutCalibrator.cpp:816)
2023-02-13T18:40:48.111Z [CALIBRATOR] (LutCalibrator.cpp:931) Optimal PQ multi => 33.000000, strategy => 0, white index => 21
2023-02-13T18:40:48.112Z [CALIBRATOR] (LutCalibrator.cpp:932) White correction: (1.016000, 1.000000, 1.024194)
2023-02-13T18:40:48.112Z [CALIBRATOR] (LutCalibrator.cpp:933) Min RGB floor: 0.000000, max RGB ceiling: 147.000000, scale: 240.000000
2023-02-13T18:40:48.112Z [CALIBRATOR] (LutCalibrator.cpp:934) Min RGB range => (0,0,0)
2023-02-13T18:40:48.112Z [CALIBRATOR] (LutCalibrator.cpp:935) Max RGB range => (148,150,147)
2023-02-13T18:40:48.112Z [CALIBRATOR] (LutCalibrator.cpp:936) YUV range: FULL
2023-02-13T18:40:48.112Z [CALIBRATOR] (LutCalibrator.cpp:937) YUV coefs: FCC
2023-02-13T18:40:54.080Z [CALIBRATOR] (LutCalibrator.cpp:821)
2023-02-13T18:40:54.080Z [CALIBRATOR] (LutCalibrator.cpp:822) -------------------- Calibrated colors starts --------------------
2023-02-13T18:40:54.080Z [CALIBRATOR] (LutCalibrator.cpp:823) Red: (255,0,0) => (253,0,0)
2023-02-13T18:40:54.080Z [CALIBRATOR] (LutCalibrator.cpp:824) Green: (0,255,0) => (0,255,0)
2023-02-13T18:40:54.080Z [CALIBRATOR] (LutCalibrator.cpp:825) Blue: (0,0,255) => (0,4,255)
2023-02-13T18:40:54.080Z [CALIBRATOR] (LutCalibrator.cpp:826) Yellow: (255,255,0) => (250,255,0)
2023-02-13T18:40:54.080Z [CALIBRATOR] (LutCalibrator.cpp:827) Magenta: (255,0,255) => (249,2,252)
2023-02-13T18:40:54.080Z [CALIBRATOR] (LutCalibrator.cpp:828) Cyan: (0,255,255) => (0,255,252)
2023-02-13T18:40:54.080Z [CALIBRATOR] (LutCalibrator.cpp:829) Orange: (255,128,0) => (254,128,0)
2023-02-13T18:40:54.080Z [CALIBRATOR] (LutCalibrator.cpp:830) Pink: (255,0,128) => (251,0,124)
2023-02-13T18:40:54.081Z [CALIBRATOR] (LutCalibrator.cpp:831) Azure: (0,128,255) => (0,128,252)
2023-02-13T18:40:54.081Z [CALIBRATOR] (LutCalibrator.cpp:832) Brown: (128,64,0) => (122,60,0)
2023-02-13T18:40:54.081Z [CALIBRATOR] (LutCalibrator.cpp:833) Purple: (128,0,64) => (117,8,59)
2023-02-13T18:40:54.081Z [CALIBRATOR] (LutCalibrator.cpp:834) Low red: (128,0,0) => (119,0,0)
2023-02-13T18:40:54.081Z [CALIBRATOR] (LutCalibrator.cpp:835) Low green: (0,128,0) => (0,123,0)
2023-02-13T18:40:54.081Z [CALIBRATOR] (LutCalibrator.cpp:836) Low blue: (0,0,128) => (0,2,124)
2023-02-13T18:40:54.081Z [CALIBRATOR] (LutCalibrator.cpp:837) LowestGray: (16,16,16) => (14,14,14)
2023-02-13T18:40:54.081Z [CALIBRATOR] (LutCalibrator.cpp:838) Gray1: (32,32,32) => (28,28,28)
2023-02-13T18:40:54.081Z [CALIBRATOR] (LutCalibrator.cpp:839) Gray2: (48,48,48) => (44,44,44)
2023-02-13T18:40:54.081Z [CALIBRATOR] (LutCalibrator.cpp:840) Gray3: (64,64,64) => (62,62,62)
2023-02-13T18:40:54.081Z [CALIBRATOR] (LutCalibrator.cpp:841) Gray4: (96,96,96) => (91,91,91)
2023-02-13T18:40:54.082Z [CALIBRATOR] (LutCalibrator.cpp:842) Gray5: (120,120,120) => (115,115,115)
2023-02-13T18:40:54.082Z [CALIBRATOR] (LutCalibrator.cpp:843) Gray6: (144,144,144) => (141,141,141)
2023-02-13T18:40:54.082Z [CALIBRATOR] (LutCalibrator.cpp:844) Gray7: (172,172,172) => (171,171,171)
2023-02-13T18:40:54.082Z [CALIBRATOR] (LutCalibrator.cpp:845) Gray8: (196,196,196) => (195,195,195)
2023-02-13T18:40:54.082Z [CALIBRATOR] (LutCalibrator.cpp:846) HighestGray: (220,220,220) => (221,221,221)
2023-02-13T18:40:54.082Z [CALIBRATOR] (LutCalibrator.cpp:847) White: (255,255,255) => (255,255,255)
2023-02-13T18:40:54.082Z [CALIBRATOR] (LutCalibrator.cpp:848) ------------------------------------------------------------------
2023-02-13T18:40:54.082Z [CALIBRATOR] (LutCalibrator.cpp:849)
2023-02-13T18:40:54.089Z [CALIBRATOR] (LutCalibrator.cpp:1217) ----------------- Preparing and saving LUT table --------------------
2023-02-13T18:40:54.090Z [CALIBRATOR] (LutCalibrator.cpp:1218) Initial mode: NO
2023-02-13T18:40:54.090Z [CALIBRATOR] (LutCalibrator.cpp:1219) Using YUV coefs: FCC
2023-02-13T18:40:54.090Z [CALIBRATOR] (LutCalibrator.cpp:1220) YUV table range: FULL
2023-02-13T18:40:54.090Z [CALIBRATOR] (LutCalibrator.cpp:1224) Min RGB floor: 0.000000, max RGB ceiling: 147.000000
2023-02-13T18:40:54.090Z [CALIBRATOR] (LutCalibrator.cpp:1225) Delta RGB range => 147.000000
2023-02-13T18:40:54.090Z [CALIBRATOR] (LutCalibrator.cpp:1226) Min RGB range => (0,0,0)
2023-02-13T18:40:54.090Z [CALIBRATOR] (LutCalibrator.cpp:1227) Max RGB range => (148,150,147)
2023-02-13T18:40:54.113Z [CALIBRATOR] (LutCalibrator.cpp:1231) LUT RGB HDR table (1/3) is ready
2023-02-13T18:40:54.577Z [CALIBRATOR] (LutCalibrator.cpp:1269) LUT YUV HDR table (2/3) is ready
2023-02-13T18:40:54.968Z [CALIBRATOR] (LutCalibrator.cpp:1300) LUT YUV table (3/3) is ready
2023-02-13T18:40:54.968Z [CALIBRATOR] (LutCalibrator.cpp:1305) ---------------------- LUT table is saved -----------------------
Dedicated LUT table for SDR & HDR (beta version, MJPEG calibration)
The grabber is detected also on Raspberry Pi (Zero 2W) USB2.0. But it offers only MJPEG encoding on USB2.0 (old MS2109 has some YUV modes even then which is suitable for the calibration procedure). Because we can't control coefs for MJPEG the calibration result is worse around around 2000 for MJPEG. Use YUV LUT.Submitted PR #508 to overcome the problem. The strategy for MJPEG seems a bit different than for YUV format. When MS2130 is connected using USB2.0 port: Windows offers MJPEG & NV12, Linux(Rpi) only MJPEG.Contrary to the old MS2109, you don't need to modify contrast, brightness or saturation. Just leave it on defaults which means 0 for contrast/brightness/saturation/hue in HyperHDR grabber configuration. If there were other values set before, you need to restart Raspberry Pi/PC afterwards to apply new settings.
Download it here (use 7-zip): ms2130_mjpeg.tar.zip
The calibration was done using Windows 10, 1080p24, HDR 12 bit RGB, grabber: Raspberry Pi Zero 2W USB2.0 port MJPEG at 1080p30
2023-02-14T19:06:23.312Z [CALIBRATOR] (LutCalibrator.cpp:908) Mean error for FCC is: 1035.874299
2023-02-14T19:06:23.312Z [CALIBRATOR] (LutCalibrator.cpp:908) Mean error for REC.709 is: 5403.073143
2023-02-14T19:06:23.312Z [CALIBRATOR] (LutCalibrator.cpp:908) Mean error for REC.601 is: 1060.410922
2023-02-14T19:06:23.312Z [CALIBRATOR] Best coef is: FCC
2023-02-14T19:06:23.312Z [CALIBRATOR] Requesting next coef for switching: FCC
2023-02-14T19:06:36.829Z [CALIBRATOR] (LutCalibrator.cpp:801) --------------------- Captured colors starts ---------------------
2023-02-14T19:06:36.830Z [CALIBRATOR] (LutCalibrator.cpp:802) Red: (255,0,0) => (133, 87, 53)
2023-02-14T19:06:36.830Z [CALIBRATOR] (LutCalibrator.cpp:803) Green: (0,255,0) => (119, 149, 87)
2023-02-14T19:06:36.830Z [CALIBRATOR] (LutCalibrator.cpp:804) Blue: (0,0,255) => (71, 54, 142)
2023-02-14T19:06:36.830Z [CALIBRATOR] (LutCalibrator.cpp:805) Yellow: (255,255,0) => (145, 152, 89)
2023-02-14T19:06:36.830Z [CALIBRATOR] (LutCalibrator.cpp:806) Magenta: (255,0,255) => (135, 90, 141)
2023-02-14T19:06:36.830Z [CALIBRATOR] (LutCalibrator.cpp:807) Cyan: (0,255,255) => (121, 149, 144)
2023-02-14T19:06:36.830Z [CALIBRATOR] (LutCalibrator.cpp:808) Orange: (255,128,0) => (136, 117, 71)
2023-02-14T19:06:36.830Z [CALIBRATOR] (LutCalibrator.cpp:809) Pink: (255,0,128) => (134, 87, 105)
2023-02-14T19:06:36.830Z [CALIBRATOR] (LutCalibrator.cpp:810) Azure: (0,128,255) => (94, 110, 141)
2023-02-14T19:06:36.830Z [CALIBRATOR] (LutCalibrator.cpp:811) Brown: (128,64,0) => (99, 82, 44)
2023-02-14T19:06:36.831Z [CALIBRATOR] (LutCalibrator.cpp:812) Purple: (128,0,64) => (96, 58, 74)
2023-02-14T19:06:36.831Z [CALIBRATOR] (LutCalibrator.cpp:813) Low red: (128,0,0) => (95, 56, 32)
2023-02-14T19:06:36.831Z [CALIBRATOR] (LutCalibrator.cpp:814) Low green: (0,128,0) => (82, 108, 57)
2023-02-14T19:06:36.831Z [CALIBRATOR] (LutCalibrator.cpp:815) Low blue: (0,0,128) => (44, 33, 102)
2023-02-14T19:06:36.831Z [CALIBRATOR] (LutCalibrator.cpp:816) LowestGray: (16,16,16) => (38, 39, 39)
2023-02-14T19:06:36.831Z [CALIBRATOR] (LutCalibrator.cpp:817) Gray1: (32,32,32) => (53, 55, 52)
2023-02-14T19:06:36.831Z [CALIBRATOR] (LutCalibrator.cpp:818) Gray2: (48,48,48) => (66, 68, 65)
2023-02-14T19:06:36.831Z [CALIBRATOR] (LutCalibrator.cpp:819) Gray3: (64,64,64) => (77, 79, 76)
2023-02-14T19:06:36.831Z [CALIBRATOR] (LutCalibrator.cpp:820) Gray4: (96,96,96) => (94, 96, 93)
2023-02-14T19:06:36.831Z [CALIBRATOR] (LutCalibrator.cpp:821) Gray5: (120,120,120) => (105, 107, 104)
2023-02-14T19:06:36.832Z [CALIBRATOR] (LutCalibrator.cpp:822) Gray6: (144,144,144) => (115, 117, 114)
2023-02-14T19:06:36.832Z [CALIBRATOR] (LutCalibrator.cpp:823) Gray7: (172,172,172) => (125, 127, 124)
2023-02-14T19:06:36.832Z [CALIBRATOR] (LutCalibrator.cpp:824) Gray8: (196,196,196) => (132, 134, 131)
2023-02-14T19:06:36.832Z [CALIBRATOR] (LutCalibrator.cpp:825) HighestGray: (220,220,220) => (139, 141, 138)
2023-02-14T19:06:36.832Z [CALIBRATOR] (LutCalibrator.cpp:826) White: (255,255,255) => (148, 150, 147)
2023-02-14T19:06:36.832Z [CALIBRATOR] (LutCalibrator.cpp:827) ------------------------------------------------------------------
2023-02-14T19:06:36.833Z [CALIBRATOR] (LutCalibrator.cpp:828)
2023-02-14T19:06:36.833Z [CALIBRATOR] (LutCalibrator.cpp:943) Optimal PQ multi => 24.500000, strategy => 0, white index => 19
2023-02-14T19:06:36.833Z [CALIBRATOR] (LutCalibrator.cpp:944) White correction: (1.019068, 1.000000, 1.028886)
2023-02-14T19:06:36.833Z [CALIBRATOR] (LutCalibrator.cpp:945) Min RGB floor: 0.000000, max RGB ceiling: 149.000000, scale: 224.000000
2023-02-14T19:06:36.833Z [CALIBRATOR] (LutCalibrator.cpp:946) Min RGB range => (0,0,0)
2023-02-14T19:06:36.833Z [CALIBRATOR] (LutCalibrator.cpp:947) Max RGB range => (149,151,150)
2023-02-14T19:06:36.833Z [CALIBRATOR] (LutCalibrator.cpp:948) YUV range: FULL
2023-02-14T19:06:36.833Z [CALIBRATOR] (LutCalibrator.cpp:949) YUV coefs: FCC
2023-02-14T19:06:42.402Z [CALIBRATOR] (LutCalibrator.cpp:833)
2023-02-14T19:06:42.402Z [CALIBRATOR] (LutCalibrator.cpp:834) -------------------- Calibrated colors starts --------------------
2023-02-14T19:06:42.402Z [CALIBRATOR] (LutCalibrator.cpp:835) Red: (255,0,0) => (255,3,0)
2023-02-14T19:06:42.402Z [CALIBRATOR] (LutCalibrator.cpp:836) Green: (0,255,0) => (0,255,0)
2023-02-14T19:06:42.403Z [CALIBRATOR] (LutCalibrator.cpp:837) Blue: (0,0,255) => (0,1,255)
2023-02-14T19:06:42.403Z [CALIBRATOR] (LutCalibrator.cpp:838) Yellow: (255,255,0) => (255,255,0)
2023-02-14T19:06:42.403Z [CALIBRATOR] (LutCalibrator.cpp:839) Magenta: (255,0,255) => (255,0,255)
2023-02-14T19:06:42.403Z [CALIBRATOR] (LutCalibrator.cpp:840) Cyan: (0,255,255) => (0,255,255)
2023-02-14T19:06:42.403Z [CALIBRATOR] (LutCalibrator.cpp:841) Orange: (255,128,0) => (255,132,0)
2023-02-14T19:06:42.403Z [CALIBRATOR] (LutCalibrator.cpp:842) Pink: (255,0,128) => (255,0,121)
2023-02-14T19:06:42.403Z [CALIBRATOR] (LutCalibrator.cpp:843) Azure: (0,128,255) => (0,127,255)
2023-02-14T19:06:42.403Z [CALIBRATOR] (LutCalibrator.cpp:844) Brown: (128,64,0) => (122,60,0)
2023-02-14T19:06:42.403Z [CALIBRATOR] (LutCalibrator.cpp:845) Purple: (128,0,64) => (119,4,57)
2023-02-14T19:06:42.403Z [CALIBRATOR] (LutCalibrator.cpp:846) Low red: (128,0,0) => (117,1,0)
2023-02-14T19:06:42.403Z [CALIBRATOR] (LutCalibrator.cpp:847) Low green: (0,128,0) => (0,125,0)
2023-02-14T19:06:42.404Z [CALIBRATOR] (LutCalibrator.cpp:848) Low blue: (0,0,128) => (0,2,119)
2023-02-14T19:06:42.404Z [CALIBRATOR] (LutCalibrator.cpp:849) LowestGray: (16,16,16) => (13,13,13)
2023-02-14T19:06:42.404Z [CALIBRATOR] (LutCalibrator.cpp:850) Gray1: (32,32,32) => (27,27,27)
2023-02-14T19:06:42.404Z [CALIBRATOR] (LutCalibrator.cpp:851) Gray2: (48,48,48) => (43,43,43)
2023-02-14T19:06:42.404Z [CALIBRATOR] (LutCalibrator.cpp:852) Gray3: (64,64,64) => (60,60,60)
2023-02-14T19:06:42.404Z [CALIBRATOR] (LutCalibrator.cpp:853) Gray4: (96,96,96) => (92,92,92)
2023-02-14T19:06:42.404Z [CALIBRATOR] (LutCalibrator.cpp:854) Gray5: (120,120,120) => (118,118,118)
2023-02-14T19:06:42.404Z [CALIBRATOR] (LutCalibrator.cpp:855) Gray6: (144,144,144) => (145,145,145)
2023-02-14T19:06:42.404Z [CALIBRATOR] (LutCalibrator.cpp:856) Gray7: (172,172,172) => (178,178,178)
2023-02-14T19:06:42.404Z [CALIBRATOR] (LutCalibrator.cpp:857) Gray8: (196,196,196) => (204,204,204)
2023-02-14T19:06:42.404Z [CALIBRATOR] (LutCalibrator.cpp:858) HighestGray: (220,220,220) => (233,233,233)
2023-02-14T19:06:42.405Z [CALIBRATOR] (LutCalibrator.cpp:859) White: (255,255,255) => (255,255,255)
2023-02-14T19:06:42.405Z [CALIBRATOR] (LutCalibrator.cpp:860) ------------------------------------------------------------------
Latency test
1080p120 => ~49ms
Beta Was this translation helpful? Give feedback.
All reactions