OSError('Cannot detect %s device' % self.SENSE_HAT_FB_NAME)

[theodorepsi]

Hi there, I am trying to configure/connect to my Sense HAT (B) and when I try the following code:

from sense_hat import SenseHat
from datetime import datetime

sense = SenseHat()

def get_sense_data():
sense_data = []

while True:
print(get_sense_data())

I get the following error:

python3 SenseHatTest.py
Traceback (most recent call last):
File "SenseHatTest.py", line 4, in
sense = SenseHat()
File "/usr/lib/python3/dist-packages/sense_hat/sense_hat.py", line 39, in init
raise OSError('Cannot detect %s device' % self.SENSE_HAT_FB_NAME)
OSError: Cannot detect RPi-Sense FB device

I tried using the following commands as seen in a similar post and got the following output messages

i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- 29 -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- 48 -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- 5c -- -- --
60: -- -- -- -- -- -- -- -- 68 -- -- -- -- -- -- --
70: 70 -- -- -- -- -- -- --

dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.10.52+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1441 Tue Aug 3 18:08:18 BST 2021
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
[ 0.000000] random: fast init done
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] Reserved memory: created CMA memory pool at 0x17c00000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000001bffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000001bffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001bffffff]
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] Normal zone: 1008 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 114688 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113680
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:57:EC:C7 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 console=ttyS0,115200 console=tty1 root=PARTUUID=09c3292b-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait modules-load=dwc2,g_ether
[ 0.000000] Kernel parameter elevator= does not have any effect anymore.
Please use sysfs to set IO scheduler for individual devices.
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 374400K/458752K available (8680K kernel code, 1324K rwdata, 2824K rodata, 424K init, 837K bss, 18816K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] ftrace: allocating 30707 entries in 60 pages
[ 0.000000] ftrace: allocated 60 pages with 4 groups
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x324/0x560 with crng_init=1
[ 0.000025] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000094] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000178] bcm2835: system timer (irq = 27)
[ 0.000852] Console: colour dummy device 80x30
[ 0.001540] printk: console [tty1] enabled
[ 0.001636] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[ 0.060342] pid_max: default: 32768 minimum: 301
[ 0.060642] LSM: Security Framework initializing
[ 0.060970] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.061039] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.063069] cgroup: Disabling memory control group subsystem
[ 0.063498] CPU: Testing write buffer coherency: ok
[ 0.065316] Setting up static identity map for 0x8200 - 0x8238
[ 0.066581] devtmpfs: initialized
[ 0.079622] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 0.080011] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.080093] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.087889] pinctrl core: initialized pinctrl subsystem
[ 0.089762] NET: Registered protocol family 16
[ 0.094534] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.100955] audit: initializing netlink subsys (disabled)
[ 0.102464] thermal_sys: Registered thermal governor 'step_wise'
[ 0.103488] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.103577] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.103861] Serial: AMBA PL011 UART driver
[ 0.110639] audit: type=2000 audit(0.100:1): state=initialized audit_enabled=0 res=1
[ 0.129931] bcm2835-mbox 2000b880.mailbox: mailbox enabled
[ 0.150798] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-08-03T18:17:07, variant start
[ 0.160814] raspberrypi-firmware soc:firmware: Firmware hash is 40787ee5905644f639a2a0f6e00ae12e517a2211
[ 0.210886] Kprobes globally optimized
[ 0.219727] bcm2835-dma 20007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.222878] SCSI subsystem initialized
[ 0.223370] usbcore: registered new interface driver usbfs
[ 0.223513] usbcore: registered new interface driver hub
[ 0.223645] usbcore: registered new device driver usb
[ 0.226401] clocksource: Switched to clocksource timer
[ 2.230049] VFS: Disk quotas dquot_6.6.0
[ 2.230231] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.230531] FS-Cache: Loaded
[ 2.230919] CacheFiles: Loaded
[ 2.248929] NET: Registered protocol family 2
[ 2.249275] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 2.250737] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 2.250889] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 2.251015] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 2.251143] TCP: Hash tables configured (established 4096 bind 4096)
[ 2.251349] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 2.251429] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 2.251902] NET: Registered protocol family 1
[ 2.253183] RPC: Registered named UNIX socket transport module.
[ 2.253253] RPC: Registered udp transport module.
[ 2.253292] RPC: Registered tcp transport module.
[ 2.253326] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.254891] hw perfevents: no irqs for PMU, sampling events not supported
[ 2.255009] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available
[ 2.259691] Initialise system trusted keyrings
[ 2.260239] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 2.272460] zbud: loaded
[ 2.275498] FS-Cache: Netfs 'nfs' registered for caching
[ 2.277044] NFS: Registering the id_resolver key type
[ 2.277168] Key type id_resolver registered
[ 2.277210] Key type id_legacy registered
[ 2.277458] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 2.277514] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 2.279437] Key type asymmetric registered
[ 2.279513] Asymmetric key parser 'x509' registered
[ 2.279634] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.279687] io scheduler mq-deadline registered
[ 2.279724] io scheduler kyber registered
[ 2.282976] bcm2708_fb soc:fb: FB found 1 display(s)
[ 2.294503] Console: switching to colour frame buffer device 82x26
[ 2.302158] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656x416
[ 2.313380] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 2.317782] bcm2835-aux-uart 20215040.serial: there is not valid maps for state default
[ 2.326380] bcm2835-rng 20104000.rng: hwrng registered
[ 2.330138] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 2.337793] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
[ 2.365440] brd: module loaded
[ 2.384000] loop: module loaded
[ 2.389569] Loading iSCSI transport class v2.0-870.
[ 2.395187] libphy: Fixed MDIO Bus: probed
[ 2.398860] usbcore: registered new interface driver smsc95xx
[ 2.401985] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 2.405305] dwc_otg: FIQ enabled
[ 2.405324] dwc_otg: NAK holdoff enabled
[ 2.405338] dwc_otg: FIQ split-transaction FSM enabled
[ 2.405363] Module dwc_common_port init
[ 2.405833] usbcore: registered new interface driver usb-storage
[ 2.409558] mousedev: PS/2 mouse device common for all mice
[ 2.414460] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 2.420701] sdhci: Secure Digital Host Controller Interface driver
[ 2.423954] sdhci: Copyright(c) Pierre Ossman
[ 2.427961] mmc-bcm2835 20300000.mmcnr: could not get clk, deferring probe
[ 2.432155] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
[ 2.435671] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.439698] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.443292] hid: raw HID events driver (C) Jiri Kosina
[ 2.446680] usbcore: registered new interface driver usbhid
[ 2.449622] usbhid: USB HID core driver
[ 2.459671] Initializing XFRM netlink socket
[ 2.462946] NET: Registered protocol family 17
[ 2.466105] Key type dns_resolver registered
[ 2.469897] registered taskstats version 1
[ 2.472691] Loading compiled-in X.509 certificates
[ 2.491991] uart-pl011 20201000.serial: cts_event_workaround enabled
[ 2.495069] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 2.503966] bcm2835-aux-uart 20215040.serial: there is not valid maps for state default
[ 2.510894] printk: console [ttyS0] disabled
[ 2.514054] 20215040.serial: ttyS0 at MMIO 0x20215040 (irq = 53, base_baud = 50000000) is a 16550
[ 3.360722] printk: console [ttyS0] enabled
[ 3.369610] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 3.382538] mmc-bcm2835 20300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 3.391781] mmc-bcm2835 20300000.mmcnr: DMA channel allocated
[ 3.429577] sdhost: log_buf @ (ptrval) (97d10000)
[ 3.474146] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 3.484558] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.493132] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 3.505850] of_cfs_init
[ 3.531641] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.540457] of_cfs_init: OK
[ 3.548934] Waiting for root device PARTUUID=09c3292b-02...
[ 3.558572] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 3.602694] mmc0: host does not support reading read-only switch, assuming write-enable
[ 3.619748] mmc0: new high speed SDHC card at address 59b4
[ 3.630128] mmcblk0: mmc0:59b4 USDU1 14.9 GiB
[ 3.641338] mmcblk0: p1 p2
[ 3.687719] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 3.698192] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 3.739297] mmc1: new high speed SDIO card at address 0001
[ 4.033223] EXT4-fs (mmcblk0p2): recovery complete
[ 4.047298] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.061159] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 4.080764] devtmpfs: mounted
[ 4.094211] Freeing unused kernel memory: 424K
[ 4.101848] Kernel memory protection not selected by kernel config.
[ 4.111363] Run /sbin/init as init process
[ 4.118589] with arguments:
[ 4.118607] /sbin/init
[ 4.118619] with environment:
[ 4.118632] HOME=/
[ 4.118643] TERM=linux
[ 4.118655] modules-load=dwc2,g_ether
[ 4.868843] systemd[1]: System time before build time, advancing clock.
[ 5.050747] NET: Registered protocol family 10
[ 5.060640] Segment Routing with IPv6
[ 5.156083] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 5.189941] systemd[1]: Detected architecture arm.
[ 5.229014] systemd[1]: Set hostname to .
[ 7.780651] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.815978] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.827571] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.846791] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.858472] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.873326] systemd[1]: Listening on Syslog Socket.
[ 7.887549] systemd[1]: Listening on Journal Socket.
[ 7.901453] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 7.929563] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.977772] systemd[1]: Mounting RPC Pipe File System...
[ 9.547774] dwc2 20980000.usb: supply vusb_d not found, using dummy regulator
[ 9.587345] dwc2 20980000.usb: supply vusb_a not found, using dummy regulator
[ 9.876704] dwc2 20980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM
[ 9.947265] dwc2 20980000.usb: DWC OTG Controller
[ 9.954889] dwc2 20980000.usb: new USB bus registered, assigned bus number 1
[ 10.066851] dwc2 20980000.usb: irq 33, io mem 0x20980000
[ 10.106920] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 10.120913] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.131188] usb usb1: Product: DWC OTG Controller
[ 10.138894] usb usb1: Manufacturer: Linux 5.10.52+ dwc2_hsotg
[ 10.147589] usb usb1: SerialNumber: 20980000.usb
[ 10.378295] systemd[1]: Started File System Check on Root Device.
[ 10.407695] hub 1-0:1.0: USB hub found
[ 10.427539] hub 1-0:1.0: 1 port detected
[ 10.498533] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 10.720993] systemd[1]: Started Journal Service.
[ 10.739138] using random self ethernet address
[ 10.746765] using random host ethernet address
[ 10.810546] usb0: HOST MAC c6:5f:0c:6c:7f:38
[ 10.861167] usb0: MAC 32:d5:12:31:17:d4
[ 10.896691] using random self ethernet address
[ 10.904055] using random host ethernet address
[ 10.963018] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 10.972657] g_ether gadget: g_ether ready
[ 10.979316] dwc2 20980000.usb: bound driver g_ether
[ 11.104743] i2c /dev entries driver
[ 11.868409] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 12.457323] systemd-journald[97]: Received request to flush runtime journal from PID 1
[ 16.720856] mc: Linux media interface: v0.10
[ 16.959908] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 16.962546] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 16.962583] [vc_sm_connected_init]: start
[ 16.995791] [vc_sm_connected_init]: installed successfully
[ 17.165448] videodev: Linux video capture interface: v2.00
[ 17.259166] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 17.263675] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 17.273730] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 17.286656] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 17.335361] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 17.337736] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 17.340259] bcm2835_audio bcm2835_audio: there is not valid maps for state default
[ 17.342275] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 17.365256] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 17.388169] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 17.388226] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 17.388273] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 17.388309] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 17.388343] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 17.392576] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 17.427838] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 17.472046] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 17.472131] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 17.510163] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 17.510243] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 17.547831] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 17.547918] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 19.871972] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 20.381106] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 21.022255] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[ 21.180398] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 21.195413] usbcore: registered new interface driver brcmfmac
[ 21.472041] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 21.472287] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 21.472438] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 21.473642] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 22 2019 01:59:28 version 7.45.98.94 (r723000 CY) FWID 01-3b33decd
[ 25.431731] random: crng init done
[ 25.431767] random: 7 urandom warning(s) missed due to ratelimiting
[ 26.572065] uart-pl011 20201000.serial: no DMA platform data
[ 27.106220] Bluetooth: Core ver 2.22
[ 27.106522] NET: Registered protocol family 31
[ 27.106544] Bluetooth: HCI device and connection manager initialized
[ 27.176608] Bluetooth: HCI socket layer initialized
[ 27.176654] Bluetooth: L2CAP socket layer initialized
[ 27.176730] Bluetooth: SCO socket layer initialized
[ 27.211335] Bluetooth: HCI UART driver ver 2.3
[ 27.211370] Bluetooth: HCI UART protocol H4 registered
[ 27.211543] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 27.211929] Bluetooth: HCI UART protocol Broadcom registered
[ 27.279443] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 28.923914] 8021q: 802.1Q VLAN Support v1.8
[ 30.269611] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 30.269640] Bluetooth: BNEP filters: protocol multicast
[ 30.269673] Bluetooth: BNEP socket layer initialized
[ 31.049630] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 33.408490] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

---

raspi-gpio get
BANK0 (GPIO 0 to 27):
GPIO 0: level=1 fsel=0 func=INPUT
GPIO 1: level=1 fsel=0 func=INPUT
GPIO 2: level=1 fsel=4 alt=0 func=SDA1
GPIO 3: level=1 fsel=4 alt=0 func=SCL1
GPIO 4: level=1 fsel=0 func=INPUT
GPIO 5: level=0 fsel=0 func=INPUT
GPIO 6: level=0 fsel=0 func=INPUT
GPIO 7: level=1 fsel=1 func=OUTPUT
GPIO 8: level=1 fsel=1 func=OUTPUT
GPIO 9: level=0 fsel=4 alt=0 func=SPI0_MISO
GPIO 10: level=0 fsel=4 alt=0 func=SPI0_MOSI
GPIO 11: level=0 fsel=4 alt=0 func=SPI0_SCLK
GPIO 12: level=0 fsel=0 func=INPUT
GPIO 13: level=0 fsel=0 func=INPUT
GPIO 14: level=1 fsel=2 alt=5 func=TXD1
GPIO 15: level=1 fsel=2 alt=5 func=RXD1
GPIO 16: level=0 fsel=0 func=INPUT
GPIO 17: level=0 fsel=0 func=INPUT
GPIO 18: level=0 fsel=0 func=INPUT
GPIO 19: level=0 fsel=0 func=INPUT
GPIO 20: level=0 fsel=0 func=INPUT
GPIO 21: level=0 fsel=0 func=INPUT
GPIO 22: level=0 fsel=0 func=INPUT
GPIO 23: level=0 fsel=0 func=INPUT
GPIO 24: level=0 fsel=0 func=INPUT
GPIO 25: level=0 fsel=0 func=INPUT
GPIO 26: level=0 fsel=0 func=INPUT
GPIO 27: level=0 fsel=0 func=INPUT
BANK1 (GPIO 28 to 45):
GPIO 28: level=1 fsel=0 func=INPUT
GPIO 29: level=1 fsel=0 func=INPUT
GPIO 30: level=0 fsel=7 alt=3 func=CTS0
GPIO 31: level=0 fsel=7 alt=3 func=RTS0
GPIO 32: level=1 fsel=7 alt=3 func=TXD0
GPIO 33: level=1 fsel=7 alt=3 func=RXD0
GPIO 34: level=0 fsel=7 alt=3 func=SD1_CLK
GPIO 35: level=1 fsel=7 alt=3 func=SD1_CMD
GPIO 36: level=1 fsel=7 alt=3 func=SD1_DAT0
GPIO 37: level=1 fsel=7 alt=3 func=SD1_DAT1
GPIO 38: level=1 fsel=7 alt=3 func=SD1_DAT2
GPIO 39: level=1 fsel=7 alt=3 func=SD1_DAT3
GPIO 40: level=1 fsel=1 func=OUTPUT
GPIO 41: level=1 fsel=1 func=OUTPUT
GPIO 42: level=0 fsel=0 func=INPUT
GPIO 43: level=1 fsel=4 alt=0 func=GPCLK2
GPIO 44: level=0 fsel=1 func=OUTPUT
GPIO 45: level=1 fsel=1 func=OUTPUT
BANK2 (GPIO 46 to 53):
GPIO 46: level=1 fsel=0 func=INPUT
GPIO 47: level=0 fsel=1 func=OUTPUT
GPIO 48: level=0 fsel=4 alt=0 func=SD0_CLK
GPIO 49: level=1 fsel=4 alt=0 func=SD0_CMD
GPIO 50: level=1 fsel=4 alt=0 func=SD0_DAT0
GPIO 51: level=1 fsel=4 alt=0 func=SD0_DAT1
GPIO 52: level=1 fsel=4 alt=0 func=SD0_DAT2
GPIO 53: level=1 fsel=4 alt=0 func=SD0_DAT3

Does anyone know why I get this error and how I can fix it? I'm wondering whether it is a faulty sense hat.

[richburdon]

I get the same error