0x0.st/XXBx.log

[TRESAS777]

https://0x0.st/XXBx.log

[TRESAS777]

after trying to install with archinstall the laptop stopped working, it turns on and stays in the logo, it does not even enter the bio, do you know what it can be?

[svartkanin]

I run an installation with the same configuration and I went through fine. My suggestion would be to try another installation and see if that works

[TRESAS777]

I can't, the pc is destroyed, it won't let me enter the bios, the boot devices, it stays stuck in the first logo.

[svartkanin]

First logo being your laptop vendors logo? What laptop is it?
Have you tried unplugging everything including the live USB and powering it on?

[TRESAS777]

https://0x0.st/XXBx.log
Hewlett-Packard HP Pavilion dv4 Notebook PC.

after the installation failed, i restarted the computer and it got stuck in the hp logo, the first one that appears to enter the bios, and all the shortcuts that can be done when turning on, i try to enter the bios or boot device but it keeps loading and does not pass from there, even without the usb. so i am destroyed, since you can not access the most basic thing that is the bios or boot devices to try to fix it with a bootable usb.

[svartkanin]

Archinstall would not cause a laptop to completely meltdown, according to the error you posted the partitioning was successful but retrieving the newly created partition failed for some reason. This does not impact the actual functionality of the laptop.
Without any more information we can't help you debugging

[TRESAS777]

I will give as much information as possible, it is an old computer, before I had windows, I decided to install linux and I was trying different distributions but for some reason some drivers failed, so I installed another different distro, before arch I had installed 3 different ones, and when installing with archinstall the first time I got an error so I decided to update the packages and I did it again but it did not work, everything was fine until I deleted the disk to create the partitions and there was that failure, I do not know if there on the disk was the boot to enter the bios and keyboard shortcuts to turn on the computer, and only the hp logo appears and shows as if it were loading the shortcut as bios or quel enter and then does not pass. I'm going to try connecting another hard drive which by the way is ata type, and I think that's all. thank you very much.

[svartkanin]

It says press F10 for BIOS setup options, are you able to perform that?

[TRESAS777]

That's exactly what I did and it doesn't go beyond that screen, it doesn't load anything else. That's what happens if I press F9 to boot from USB, that's why I say it was destroyed if I can't even access the bios, the truth is I don't know what happened.