Skip to content

Latest commit

 

History

History
1168 lines (1063 loc) · 62.8 KB

CHANGELOG.md

File metadata and controls

1168 lines (1063 loc) · 62.8 KB

Apptainer Changelog

The Singularity Project has been adopted by the Linux Foundation and re-branded as Apptainer. For older changes see the archived Singularity change log.

Changes for v1.4.x

Changes for v1.3.x

  • Fixed the issue that oras download progress bar gets stuck when downloading large images.
  • Fixed the issue when nesting apptainer instance start inside a container on cgroups-v2 capable host.

v1.3.1 - [2024-04-24]

  • Make 'apptainer build' work with signed Docker containers.
  • Fixed regression introduced in 1.3.0 that prevented closing cryptsetup and the corresponding loop device after running an encrypted sif container file in suid mode.
  • Stopped binding over the default timezone in the container with the host's timezone, which led to unexpected behavior if the application changed timezones.
  • Added progress bars for oras:// push and pull.
  • Hide Instance stats will not be available message under --sharens mode.
  • Fix problem where credentials locally stored with registry login command were not usable in some execution flows. Run registry login again with latest version to ensure credentials are stored correctly.
  • Make runscript timeout configurable.
  • Return invalid bind path mount options during bind path parsing.
  • Make the INFO message more helpful when a running background process at exit time causes a FUSE mount to not shut down cleanly.
  • Fixed the wrong mediaType in the oras push manifest.

v1.3.0 - [2024-03-12]

Changes since v1.2.5

Changed defaults / behaviours

  • FUSE mounts are now supported in setuid mode, enabling full functionality even when kernel filesystem mounts are insecure due to unprivileged users having write access to raw filesystems in containers.

    When allow setuid-mount extfs = no (the default) in apptainer.conf, then the fuse2fs image driver will be used to mount ext3 images in setuid mode instead of the kernel driver (ext3 images are primarily used for the --overlay feature), restoring functionality that was removed by default in Apptainer 1.1.8 because of the security risk.

    The allow setuid-mount squashfs configuration option in apptainer.conf now has a new default called iflimited which allows kernel squashfs mounts only if there is at least one limit container option set or if Execution Control Lists are activated in ecl.toml. If kernel squashfs mounts are are not allowed, then the squashfuse image driver will be used instead. iflimited is the default because if one of those limits are used the system administrator ensures that unprivileged users do not have write access to the containers, but on the other hand using FUSE would enable a user to theoretically bypass the limits via ptrace() because the FUSE process runs as that user.

    The fuse-overlayfs image driver will also now be tried in setuid mode if the kernel overlayfs driver does not work (for example if one of the layers is a FUSE filesystem).

    In addition, if allow setuid-mount encrypted = no then the unprivileged gocryptfs format will be used for encrypting SIF files instead of the kernel device-mapper. If a SIF file was encrypted using the gocryptfs format, it can now be mounted in setuid mode in addition to non-setuid mode.

  • The four dependent FUSE programs for various reasons all now need to be compiled from source and included in Apptainer installations and packages. Scripts are provided to make this easy; see the updated instructions in INSTALL.md. The bundled squashfuse_ll is updated to version 0.5.1.

  • Change the default in user namespace mode to use either kernel overlayfs or fuse-overlayfs instead of the underlay feature for the purpose of adding bind mount points. That was already the default in setuid mode; this change makes it consistent. The underlay feature can still be used with the --underlay option, but it is deprecated because the implementation is complicated and measurements have shown that the performance of underlay is similar to overlayfs and fuse-overlayfs. For now the underlay feature can be made the default again with a new preferred value on the enable underlay configuration option. Also the --underlay option can be used in setuid mode or as the root user, although it was ignored previously.

  • Prefer again to use kernel overlayfs over fuse-overlayfs when a lower layer is FUSE and there's no writable upper layer, undoing the change from 1.2.0. Another workaround was found for the problem that change addressed. This applies in both setuid mode and in user namespace mode (except the latter not on CentOS7 where it isn't supported).

  • --cwd is now the preferred form of the flag for setting the container's working directory, though --pwd is still supported for compatibility.

  • When building RPM, we will now use /var/lib/apptainer (rather than /var/apptainer) to store local state files.

  • The way --home is handled when running as root (e.g. sudo apptainer) or with --fakeroot has changed. Previously, we were only modifying the HOME environment variable in these cases, while leaving the container's /etc/passwd file unchanged (with its homedir field pointing to /root, regardless of the value passed to --home). With this change, both value of HOME and the contents of /etc/passwd in the container will reflect the value passed to --home if the container is readonly. If the container is writable, the /etc/passwd file is left alone because it can interfere with commands that want to modify it.

  • The --vm and related flags to start apptainer inside a VM have been removed. This functionality was related to the retired Singularity Desktop / SyOS projects.

  • The keyserver-related commands that were under remote have been moved to their own, dedicated keyserver command. Run apptainer help keyserver for more information.

  • The commands related to OCI/Docker registries that were under remote have been moved to their own, dedicated registry command. Run apptainer help registry for more information.

  • The the remote list subcommand now outputs only remote endpoints (with keyservers and OCI/Docker registries having been moved to separate commands), and the output has been streamlined.

  • Adding a new remote endpoint using the apptainer remote add command will now set the new endpoint as default. This behavior can be suppressed by supplying the --no-default (or -n) flag to remote add.

  • Skip parsing build definition file template variables after comments beginning with a hash symbol.

  • Improved the clarity of apptainer key list output.

  • The global /tmp directory is no longer used for gocryptfs mountpoints.

  • Updated minimum go version to 1.20

New Features & Functionality

  • The remote status command will now print the username, realname, and email of the logged-in user, if available.
  • Add monitoring feature support, which requires the usage of an additional tool named apptheus, this tool will put apptainer starter into a newly created cgroup and collect system metrics.
  • A new --no-pid flag for apptainer run/shell/exec disables the PID namespace inferred by --containall and --compat.
  • Added --config option tokeyserver commands.
  • Honor an optional remoteName argument to the keyserver list command.
  • Added the APPTAINER_ENCRYPTION_PEM_DATA env var to allow for encrypting and running encrypted containers without a PEM file.
  • Adding --sharens mode for apptainer exec/run/shell, which enables to run multiple apptainer instances created by the same parent using the same image in the same user namespace.

Developer / API

  • Changes in pkg/build/types.Definition struct. New .FullRaw field introduced, which always contains the raw data for the entire definition file. Behavior of .Raw field has changed: for multi-stage builds parsed with pkg/build/types/parser.All(), .Raw contains the raw content of a single build stage. Otherwise, it is equal to .FullRaw.

Bug fixes

  • Don't bind /var/tmp on top of /tmp in the container, where /var/tmp resolves to same location as /tmp.
  • Support parentheses in test / [ commands in container startup scripts, via dependency update of mvdan.cc/sh.
  • Fix regression introduced in v1.2.0 that led to an empty user's shell field in the /etc/passwd file.
  • Prevent container builds from failing when $HOME points to a non-readable directory.
  • Fix the use of nvidia-container-cli on Ubuntu 22.04 where an ldconfig wrapper script gets in the way. Instead, we use ldconfig.real directly.
  • Run image drivers with CAP_DAC_OVERRIDE in user namespace mode. This fixes --nvccli with NVIDIA_DRIVER_CAPABILITIES=graphics, which previously failed when using fuse-overlayfs.

Release change

  • Releases will generate apptainer Docker images for the Linux amd64 and arm64 architectures at ghcr.io/apptainer/apptainer.

v1.2.5 - [2023-11-21]

  • Added libnvidia-nvvm to nvliblist.conf. Newer NVIDIA Drivers (known with >= 525.85.05) require this lib to compile OpenCL programs against NVIDIA GPUs, i.e. libnvidia-opencl depends on libnvidia-nvvm.
  • Disable the usage of cgroup in instance creation when --fakeroot is passed.
  • Disable the usage of cgroup in instance creation when hidepid mount option on /proc is set.

v1.2.4 - [2023-10-10]

  • Fixed a problem with relocating an unprivileged installation of apptainer on el8 and a mounted remote filesystem when using the --fakeroot option without /etc/subuid mapping. The fix was to change the switch to an unprivileged root-mapped namespace to be the equivalent of unshare -r instead of unshare -rm on action commands, to work around a bug in the el8 kernel.
  • Fixed a regression introduced in 1.2.0 where the user's password file information was not copied in to the container when there was a parent root-mapped user namespace (as is the case for example in cvmfsexec).
  • Added the upcoming NVIDIA driver library libnvidia-gpucomp.so to the list of libraries to add to NVIDIA GPU-enabled containers.
  • Fixed missing error handling during the creation of an encrypted image that lead to the generation of corrupted images.
  • Use APPTAINER_TMPDIR for temporary files during privileged image encryption.
  • If rootless unified cgroups v2 is available when starting an image but XDG_RUNTIME_DIR or DBUS_SESSION_BUS_ADDRESS is not set, print an info message that stats will not be available instead of exiting with a fatal error.
  • Allow templated build arguments to definition files to have empty values.

v1.2.3 - [2023-09-14]

  • The apptainer push/pull commands now show a progress bar for the oras protocol like there was for docker and library protocols.
  • The --nv and --rocm flags can now be used simultaneously.
  • Fix the use of APPTAINER_CONFIGDIR with apptainer instance start and action commands that refer to instance://.
  • Ignore undefined macros, to fix yum bootstrap agent on el7.
  • Fix the issue that apptainer would not read credentials from the Docker fallback path ~/.docker/config.json if missing in the apptainer credentials.

v1.2.2 - [2023-07-27]

  • Fix $APPTAINER_MESSAGELEVEL to correctly set the logging level.
  • Fix build failures when in setuid mode and unprivileged user namespaces are unavailable and the --fakeroot option is not selected.
  • Remove Requires: fuse from rpm packaging.

v1.2.1 - [2023-07-24]

Security fix

  • Included a fix for security advisory GHSA-mmx5-32m4-wxvx which describes an ineffective privilege drop when requesting a container network with a setuid installation of Apptainer. The vulnerability allows an attacker to delete any directory on the host filesystems with a crafted starter config. Only affects v1.2.0-rc.2 and v1.2.0.

v1.2.0 - [2023-07-18]

Changes since v1.1.9

Changed defaults / behaviours

  • Create the current working directory in a container when it doesn't exist. This restores behavior as it was before singularity 3.6.0. As a result, using --no-mount home won't have any effect when running apptainer from a home directory and will require --no-mount home,cwd to avoid mounting that directory.
  • Handle current working directory paths containing symlinks both on the host and in a container but pointing to different destinations. If detected, the current working directory is not mounted when the destination directory in the container exists.
  • Destination mount points are now sorted by shortest path first to ensure that a user bind doesn't override a previous bind path when set in arbitrary order on the CLI. This is also applied to image binds.
  • When the kernel supports unprivileged overlayfs mounts in a user namespace, the container will be constructed by default using an overlay instead of an underlay layout for bind mounts. A new --underlay action option can be used to prefer underlay instead of overlay.
  • Use fuse-overlayfs instead of the kernel overlayfs when a lower dir is a FUSE filesystem, even when the overlay layer is not writable. That always used to be done when the overlay layer was writable, but this fixes a problem seen when squashfuse (which is read-only) was used for the overlay layer.
  • Fix the enable overlay = driver configuration option to always use the overlay image driver (that is, fuse-overlayfs) even when the kernel overlayfs is usable.
  • Overlay is blocked on the panfs filesystem, allowing sandbox directories to be run from panfs without error.
  • sessiondir maxsize in apptainer.conf now defaults to 64 MiB for new installations. This is an increase from 16 MiB in prior versions.
  • The apptainer cache is now architecture aware, so the same home directory cache can be shared by machines with different architectures.
  • Show standard output of yum bootstrap if log level is verbose or higher while building a container.
  • Lookup and store user/group information in stage one prior to entering any namespaces, to fix an issue with winbind not correctly looking up user/group information when using user namespaces.
  • A new --reproducible flag for ./mconfig will configure Apptainer so that its binaries do not contain non-reproducible paths. This disables plugin functionality.

New features / functionalities

  • Support for unprivileged encryption of SIF files using gocryptfs. The gocryptfs command is included in rpm and debian packaging. This is not compatible with privileged encryption, so containers encrypted by root need to be rebuilt by an unprivileged user.
  • Templating support for definition files. Users can now define variables in definition files via a matching pair of double curly brackets. Variables of the form {{ variable }} will be replaced by a value defined either by a variable=value entry in the %arguments section of the definition file or through new build options --build-arg or --build-arg-file. By default any unused variables given in --build-arg or --build-arg-file result in a fatal error but the option --warn-unused-build-args changes that to a warning rather than a fatal error.
  • Add a new instance run command that will execute the runscript when an instance is initiated instead of executing the startscript.
  • The sign and verify commands now support signing and verification with non-PGP key material by specifying the path to a private key via the --key flag.
  • The verify command now supports verification with X.509 certificates by specifying the path to a certificate via the --certificate flag. By default, the system root certificate pool is used as trust anchors unless overridden via the --certificate-roots flag. A pool of intermediate certificates that are not trust anchors, but can be used to form a certificate chain, can also be specified via the --certificate-intermediates flag.
  • Support for online verification checks of X.509 certificates using OCSP protocol via the new verify --ocsp-verify option.
  • The instance stats command displays the resource usage every second. The --no-stream option disables this interactive mode and shows the point-in-time usage.
  • Instances are now started in a cgroup by default, when run as root or when unified cgroups v2 with systemd as manager is configured. This allows apptainer instance stats to be supported by default when possible.
  • The instance start command now accepts an optional --app <name> argument which invokes a start script within the %appstart <name> section in the definition file. The instance stop command still only requires the instance name.
  • The instance name is now available inside an instance via the new APPTAINER_INSTANCE environment variable.
  • Add ability to set a custom config directory via the new APPTAINER_CONFIGDIR environment variable.
  • Add ability to change log level through environment variables, APPTAINER_SILENT, APPTAINER_QUIET, and APPTAINER_VERBOSE. Also add APPTAINER_NOCOLOR for the --nocolor option.
  • Add discussion of using TMPDIR or APPTAINER_TMPDIR in the build help.
  • The --no-mount flag now accepts the value bind-paths to disable mounting of all bind path entries in apptainer.conf.
  • Support for DOCKER_HOST parsing when using docker-daemon://
  • DOCKER_USERNAME and DOCKER_PASSWORD supported without APPTAINER_ prefix.
  • Add new Linux capabilities CAP_PERFMON, CAP_BPF, and CAP_CHECKPOINT_RESTORE.
  • Add setopt definition file header for the yum bootstrap agent. The setopt value is passed to yum / dnf using the --setopt flag. This permits setting e.g. install_weak_deps=False to bootstrap recent versions of Fedora, where systemd (a weak dependency) cannot install correctly in the container. See examples/Fedora for an example definition file.
  • Warn user that a yum bootstrap of an older distro may fail if the host rpm _db_backend is not bdb.
  • The remote get-login-password command allows users to retrieve a remote's token. This enables piping the secret directly into docker login while preventing it from showing up in a shell's history.
  • Define EUID in %environment alongside UID.
  • In --rocm mode, the whole of /dev/dri is now bound into the container when --contain is in use. This makes /dev/dri/render devices available, required for later ROCm versions.

Other changes

  • Update minimum go version to 1.19.
  • Upgrade squashfuse_ll to version 0.2.0, removing the need for applying patches during compilation. The new version includes a fix to prevent it from triggering 'No data available errors' on overlays of SIF files that were built on machines with SELinux enabled.
  • Fix non-root instance join with unprivileged systemd-managed cgroups v2, when join is from outside a user-owned cgroup.
  • Fix joining cgroup of instance started as root, with cgroups v1, non-default cgroupfs manager, and no device rules.
  • Avoid UID / GID / EUID readonly var warnings with --env-file.
  • Ensure consistent binding of libraries under --nv/--rocm when duplicate <library>.so[.version] files are listed by ldconfig -p.
  • Ensure DOCKER_HOST is honored in non-build flows.
  • Corrected apptainer.conf comment, to refer to correct file as source of default capabilities when root default capabilities = file.
  • Fix memory usage calculation during apptainer compilation on RaspberryPi.
  • Fix misleading error when an overlay is requested by the root user while the overlay kernel module is not loaded.
  • Fix interaction between --workdir and --scratch options when the former is given a relative path.
  • Remove the warning about a missing signature when building an image based on a local unsigned SIF file.
  • Set real UID to zero when escalating privileges for CNI plugins, to fix issue appeared with RHEL 9.X.
  • Fix seccomp filters to allow mknod/mknodat syscalls to create pipe/socket and character devices with device number 0 for fakeroot builds.
  • Add 32-bit compatibility mode for 64-bit architectures in the fakeroot seccomp filter.

v1.2.0-rc.2 - [2023-07-05]

Changes since last pre-release

  • Upgrade gocryptfs to version 2.4.0, removing the need for fusermount from the fuse package.
  • Upgrade squashfuse_ll to version 0.2.0, removing the need for applying patches during compilation. The new version includes a fix to prevent it from triggering 'No data available errors' on overlays of SIF files that were built on machines with SELinux enabled.
  • Add ability to set a custom config directory via the new APPTAINER_CONFIGDIR environment variable.
  • Add ability to change log level through environment variables, APPTAINER_SILENT, APPTAINER_QUIET, and APPTAINER_VERBOSE. Also add APPTAINER_NOCOLOR for the --nocolor option.
  • Add discussion of using TMPDIR or APPTAINER_TMPDIR in the build help.
  • Add new option --warn-unused-build-args to output warnings rather than fatal errors for any additional variables given in --build-arg or --build-arg-file.
  • Use fuse-overlayfs instead of the kernel overlayfs when a lower dir is a FUSE filesystem, even when the overlay layer is not writable. That always used to be done when the overlay layer was writable, but this fixes a problem seen when squashfuse (which is read-only) was used for the overlay layer.
  • Fix the enable overlay = driver configuration option to always use the overlay image driver (that is, fuse-overlayfs) even when the kernel overlayfs is usable.
  • Fix a minor regression in 1.2.0-rc.1 where starting up under unshare -r stopped mapping the user's home directory to the fake root's home directory.
  • Fix interaction between --workdir and --scratch options when the former is given a relative path.
  • Remove the warning about a missing signature when building an image based on a local unsigned SIF file.
  • Set real UID to zero when escalating privileges for CNI plugins to fix issue appeared with RHEL 9.X.
  • Fix seccomp filters to allow mknod/mknodat syscalls to create pipe/socket and character devices with device number 0 for fakeroot builds.
  • Add 32-bit compatibility mode for 64-bit architectures in the fakeroot seccomp filter.

v1.2.0-rc.1 - [2023-06-07]

Changed defaults / behaviours

  • Create the current working directory in a container when it doesn't exist. This restores behavior as it was before singularity 3.6.0. As a result, using --no-mount home won't have any effect when running apptainer from a home directory and will require --no-mount home,cwd to avoid mounting that directory.
  • Handle current working directory paths containing symlinks both on the host and in a container but pointing to different destinations. If detected, the current working directory is not mounted when the destination directory in the container exists.
  • Destination mount points are now sorted by shortest path first to ensure that a user bind doesn't override a previous bind path when set in arbitrary order on the CLI. This is also applied to image binds.
  • When the kernel supports unprivileged overlay mounts in a user namespace, the container will be constructed by default using an overlay instead of an underlay layout for bind mounts. A new --underlay action option can be used to prefer underlay instead of overlay.
  • sessiondir maxsize in apptainer.conf now defaults to 64 MiB for new installations. This is an increase from 16 MiB in prior versions.
  • The apptainer cache is now architecture aware, so the same home directory cache can be shared by machines with different architectures.
  • Overlay is blocked on the panfs filesystem, allowing sandbox directories to be run from panfs without error.
  • Show standard output of yum bootstrap if log level is verbose or higher while building a container.
  • Lookup and store user/group information in stage one prior to entering any namespaces, to fix an issue with winbind not correctly looking up user/group information when using user namespaces.
  • A new --reproducible flag for ./mconfig will configure Apptainer so that its binaries do not contain non-reproducible paths. This disables plugin functionality.

New features / functionalities

  • Support for unprivileged encryption of SIF files using gocryptfs. The gocryptfs command is included in rpm and debian packaging. This is not compatible with privileged encryption, so containers encrypted by root need to be rebuilt by an unprivileged user.
  • Templating support for definition files. Users can now define variables in definition files via a matching pair of double curly brackets. Variables of the form {{ variable }} will be replaced by a value defined either by a variable=value entry in the %arguments section of the definition file or through new build options --build-arg or --build-arg-file.
  • Add a new instance run command that will execute the runscript when an instance is initiated instead of executing the startscript.
  • The sign and verify commands now support signing and verification with non-PGP key material by specifying the path to a private key via the --key flag.
  • The verify command now supports verification with X.509 certificates by specifying the path to a certificate via the --certificate flag. By default, the system root certificate pool is used as trust anchors unless overridden via the --certificate-roots flag. A pool of intermediate certificates that are not trust anchors, but can be used to form a certificate chain, can also be specified via the --certificate-intermediates flag.
  • Support for online verification checks of X.509 certificates using OCSP protocol via the new verify --ocsp-verify option.
  • The instance stats command displays the resource usage every second. The --no-stream option disables this interactive mode and shows the point-in-time usage.
  • Instances are now started in a cgroup by default, when run as root or when unified cgroups v2 with systemd as manager is configured. This allows apptainer instance stats to be supported by default when possible.
  • The instance start command now accepts an optional --app <name> argument which invokes a start script within the %appstart <name> section in the definition file. The instance stop command still only requires the instance name.
  • The instance name is now available inside an instance via the new APPTAINER_INSTANCE environment variable.
  • The --no-mount flag now accepts the value bind-paths to disable mounting of all bind path entries in apptainer.conf.
  • Support for DOCKER_HOST parsing when using docker-daemon://
  • DOCKER_USERNAME and DOCKER_PASSWORD supported without APPTAINER_ prefix.
  • Add new Linux capabilities CAP_PERFMON, CAP_BPF, and CAP_CHECKPOINT_RESTORE.
  • Add setopt definition file header for the yum bootstrap agent. The setopt value is passed to yum / dnf using the --setopt flag. This permits setting e.g. install_weak_deps=False to bootstrap recent versions of Fedora, where systemd (a weak dependency) cannot install correctly in the container. See examples/Fedora for an example definition file.
  • Warn user that a yum bootstrap of an older distro may fail if the host rpm _db_backend is not bdb.
  • The remote get-login-password command allows users to retrieve a remote's token. This enables piping the secret directly into docker login while preventing it from showing up in a shell's history.
  • Define EUID in %environment alongside UID.
  • In --rocm mode, the whole of /dev/dri is now bound into the container when --contain is in use. This makes /dev/dri/render devices available, required for later ROCm versions.

Other changes

  • Update minimum go version to 1.19.
  • Fix non-root instance join with unprivileged systemd-managed cgroups v2, when join is from outside a user-owned cgroup.
  • Fix joining cgroup of instance started as root, with cgroups v1, non-default cgroupfs manager, and no device rules.
  • Avoid UID / GID / EUID readonly var warnings with --env-file.
  • Ensure consistent binding of libraries under --nv/--rocm when duplicate <library>.so[.version] files are listed by ldconfig -p.
  • Ensure DOCKER_HOST is honored in non-build flows.
  • Corrected apptainer.conf comment, to refer to correct file as source of default capabilities when root default capabilities = file.
  • Fix memory usage calculation during apptainer compilation on RaspberryPi.
  • Fix misleading error when an overlay is requested by the root user while the overlay kernel module is not loaded.
  • Fix gocryptfs build procedures for deb package.

v1.1.9 - [2023-06-07]

  • Remove warning about unknown xino=on option from fuse-overlayfs, introduced in 1.1.8.
  • Ignore extraneous warning from fuse-overlayfs about a readonly /proc.
  • Fix dropped "n" characters on some platforms in definition file stored as part of SIF metadata.
  • Remove duplicated group ids.
  • Fix not being able to handle multiple entries in LD_PRELOAD when binding fakeroot into container during apptainer startup for --fakeroot with fakeroot command.

v1.1.8 - [2023-04-25]

Security fix

  • Included a fix for CVE-2023-30549 which is a vulnerability in setuid-root installations of Apptainer and Singularity that causes an elevation in severity of an existing ext4 filesystem driver vulnerability that is unpatched in several older but still actively supported operating systems including RHEL7, Debian 10, Ubuntu 18.04 and Ubuntu 20.04. The fix adds allow setuid-mount configuration options encrypted, squashfs, and extfs, and makes the default for extfs be "no". That disables the use of extfs mounts including for overlays or binds while in the setuid-root mode, while leaving it enabled for unprivileged user namespace mode. The default for encrypted and squashfs is "yes".

Other changes

  • Fix loop device 'no such device or address' spurious errors when using shared loop devices.
  • Remove unwanted colors to STDERR.
  • Add xino=on mount option for writable kernel overlay mount points to fix inode numbers consistency after kernel cache flush (not applicable to fuse-overlayfs).

v1.1.7 - [2023-03-28]

Changes since last release

  • Allow gpu options such as --nv to be nested by always inheriting all libraries bound in to a parent container's /.singularity.d/libs.
  • Map the user's home directory to the root home directory by default in the non-subuid fakeroot mode like it was in the subuid fakeroot mode, for both action commands and building containers from definition files.
  • Avoid unknown option error when using a bare squashfs image with an unpatched squashfuse_ll.
  • Fix GOCACHE settings for golang build on PPA build environment.
  • Make the error message more helpful in another place where a remote is found to have no library client.
  • Allow symlinks to the compiled prefix for suid installations. Fixes a regression introduced in 1.1.4.
  • Build via zypper on SLE systems will use repositories of host via suseconnect-container.
  • Avoid incorrect error when requesting fakeroot network.
  • Pass computed LD_LIBRARY_PATH to wrapped unsquashfs. Fixes issues where unsquashfs on host uses libraries in non-default paths.

v1.1.6 - [2023-02-14]

Security fix

  • Included a fix for CVE-2022-23538 which potentially leaked user credentials to a third-party S3 storage service when using the library:// protocol. See the link for details.

Other changes

  • Restored the ability for running instances to be tracked when apptainer is installed with tools/install-unprivileged.sh. Instance tracking depends on argument 0 of the starter, which was not getting preserved.
  • Fix GOCACHE environment variable settings when building debian source package on PPA build environment.
  • Make PS1 environment variable changeable via %environment section on definition file that used to be only changeable via APPTAINERENV_PS1 outside of container. This makes the container's prompt customizable.
  • Fix the passing of nested bind mounts when there are multiple binds separated by commas and some of them have colons separating sources and destinations.
  • Added Provides: bundled(golang()) statements to the rpm packaging for each bundled golang module.
  • Hide messages about SINGULARITY variables if corresponding APPTAINER variables are defined. Fixes a regression introduced in 1.1.4.
  • Print a warning if extra arguments are given to a shell action, and show in the run action usage that arguments may be passed.
  • Check for the existence of the runtime executable prefix, to avoid issues when running under Slurm's srun. If it doesn't exist, fall back to the compile-time prefix.
  • Increase the timeout on image driver (that is, FUSE) mounts from 2 seconds to 10 seconds. Instead, print an INFO message if it takes more than 2 seconds.
  • If a remote is defined both globally (i.e. system-wide) and individually, change apptainer remote commands to print an info message instead of exiting with a fatal error and to give precedence to the individual configuration.

v1.1.5 - [2023-01-10]

  • Update the rpm packaging to (a) move the Obsoletes of singularity to the apptainer-suid packaging, (b) remove the Provides of singularity, (c) add a Provides and Conflicts for sif-runtime, (d) add "formerly known as Singularity" to the Summary, and (e) add a Conflicts of singularity to the apptainer package. Also update the debian and nfpm packaging with (d).
  • Change rpm packaging to automatically import any modified configuration files in /etc/singularity when updating from singularity to apptainer, including importing singularity.conf using a new hidden confgen command.
  • Fix the use of fakeroot, faked, and libfakeroot.so if they are not suffixed by -sysv, as is for instance the case on Gentoo Linux.
  • Prevent the use of a --libexecdir or --bindir mconfig option from making apptainer think it was relocated and so preventing use of suid mode. The bug was introduced in v1.1.4.
  • Add helpful error message for build --remote option.
  • Add more helpful error message when no library endpoint found.
  • Avoid cleanup errors on exit when mountpoints are busy by doing a lazy unmount if a regular unmount doesn't work after 10 tries.
  • Make messages about using SINGULARITY variables less scary.

v1.1.4 - [2022-12-12]

  • Added tools/install-unprivileged.sh to download and install apptainer binaries and all dependencies into a directory of the user's choice. Works on all currently active el, fedora, debian, and ubuntu versions except ubuntu 18.04, with all architectures supported by epel and fedora. Defaults to the latest version released in epel and fedora. Other apptainer versions can be selected but it only works with apptainer 1.1.4 and later.
  • Make the binaries built in the unprivileged apptainer package relocatable. When moving the binaries to a new location, the /usr at the top of some of the paths needs to be removed. Relocation is disallowed when the starter-suid is present, for security reasons.
  • Change the warning when an overlay image is not writable, introduced in v1.1.3, back into a (more informative) fatal error because it doesn't actually enter the container environment.
  • Set the --net flag if --network or --network-args is set rather than silently ignoring them if --net was not set.
  • Do not hang on pull from http(s) source that doesn't provide a content-length.
  • Avoid hang on fakeroot cleanup under high load seen on some distributions / kernels.
  • Remove obsolete pacstrap -d in Arch packer.
  • Adjust warning message for deprecated environment variables usage.
  • Enable the --security uid:N and --security gid:N options to work when run in non-suid mode. In non-suid mode they work with any user, not just root. Unlike with root and suid mode, however, only one gid may be set in non-suid mode.

v1.1.3 - [2022-10-25]

  • Prefer the fakeroot-sysv command over the fakeroot command because the latter can be linked to either fakeroot-sysv or fakeroot-tcp, but fakeroot-sysv is much faster.
  • Update the included squashfuse_ll to have -o uid=N and -o gid=N options and changed the corresponding image driver to use them when available. This makes files inside sif files appear to be owned by the user instead of by the nobody id 65534 when running in non-setuid mode.
  • Fix the locating of shared libraries when running unsquashfs from a non-standard location.
  • Properly clean up temporary files if unsquashfs fails.
  • Fix the creation of missing bind points when using image binding with underlay.
  • Change the error when an overlay image is not writable into a warning that suggests adding :ro to make it read only or using --fakeroot.
  • Avoid permission denied errors during unprivileged builds without /etc/subuid-based fakeroot when /var/lib/containers/sigstore is readable only by root.
  • Avoid failures with --writable-tmpfs in non-setuid mode when using fuse-overlayfs versions 1.8 or greater by adding the fuse-overlayfs noacl mount option to disable support for POSIX Access Control Lists.
  • Fix the --rocm flag in combination with -c / -C by forwarding all /dri/render* devices into the container.

v1.1.2 - [2022-10-06]

  • CVE-2022-39237: The sif dependency included in Apptainer before this release does not verify that the hash algorithm(s) used are cryptographically secure when verifying digital signatures. This release updates to sif v2.8.1 which corrects this issue. See the linked advisory for references and a workaround.

v1.1.1 - [2022-10-06]

Accidentally included no code changes.

v1.1.0 - [2022-09-27]

Changed defaults / behaviours

  • The most significant change is that Apptainer no longer installs a setuid-root portion by default. This is now reasonable to do because most operations can be done with only unprivileged user namespaces (see additional changes below). If installing from rpm or debian packages, the setuid portion can be included by installing the apptainer-suid package, or if installing from source it can be included by compiling with the mconfig --with-suid option. For those that are concerned about kernel vulnerabilities with user namespaces, we recommend disabling network namespaces if you can. See the discussion in the admin guide.
  • Added a squashfuse image driver that enables mounting SIF files without using setuid-root. Uses either a squashfuse_ll command or a squashfuse command and requires unprivileged user namespaces. For better parallel performance, a patched multithreaded version of squashfuse_ll is included in rpm and debian packaging in ${prefix}/libexec/apptainer/bin.
  • Added an --unsquash action flag to temporarily convert a SIF file to a sandbox before running. In previous versions this was the default when running a SIF file without setuid or with fakeroot, but now the default is to mount with squashfuse_ll or squashfuse.
  • Added a fuse2fs image driver that enables mounting EXT3 files and EXT3 SIF overlay partitions without using setuid-root. Requires the fuse2fs command and unprivileged user namespaces.
  • Added the ability to use persistent overlay (--overlay) and --writable-tmpfs without using setuid-root. This requires unprivileged user namespaces and either a new enough kernel (>= 5.11) or the fuse-overlayfs command. Persistent overlay works when the overlay path points to a regular filesystem (known as "sandbox" mode, which is not allowed when in setuid mode), or when it points to an EXT3 image.
  • Extended the --fakeroot option to be useful when /etc/subuid and /etc/subgid mappings have not been set up. If they have not been set up, a root-mapped unprivileged user namespace (the equivalent of unshare -r) and/or the fakeroot command from the host will be tried. Together they emulate the mappings pretty well but they are simpler to administer. This feature is especially useful with the --overlay and --writable-tmpfs options and for building containers unprivileged, because they allow installing packages that assume they're running as root. A limitation on using it with --overlay and --writable-tmpfs however is that when only the fakeroot command can be used (because there are no user namespaces available, in suid mode) then the base image has to be a sandbox. This feature works nested inside of an apptainer container, where another apptainer command will also be in the fakeroot environment without requesting the --fakeroot option again, or it can be used inside an apptainer container that was not started with --fakeroot. However, the fakeroot command uses LD_PRELOAD and so needs to be bound into the container which requires a compatible libc. For that reason it doesn't work when the host and container operating systems are of very different vintages. If that's a problem and you want to use only an unprivileged root-mapped namespace even when the fakeroot command is installed, just run apptainer with unshare -r.
  • Made the --fakeroot option be implied when an unprivileged user builds a container from a definition file. When /etc/subuid and /etc/subgid mappings are not available, all scriptlets are run in a root-mapped unprivileged namespace (when possible) and the %post scriptlet is additionally run with the fakeroot command. When unprivileged user namespaces are not available, such that only the fakeroot command can be used, the --fix-perms option is implied to allow writing into directories.
  • Added additional hidden options to action and build commands for testing different fakeroot modes: --ignore-subuid, --ignore-fakeroot-command, and --ignore-userns. Also added --userns to the build command to ignore setuid-root mode like action commands do.
  • Added a --fakeroot option to the apptainer overlay create command to make an overlay EXT3 image file that works with the fakeroot that comes from unprivileged root-mapped namespaces. This is not needed with the fakeroot that comes with /etc/sub[ug]id mappings nor with the fakeroot that comes with only the fakeroot command in suid flow.
  • Added a --sparse flag to overlay create command to allow generation of a sparse EXT3 overlay image.
  • Added a binary path configuration variable as the default path to use when searching for helper executables. May contain $PATH: which gets substituted with the user's PATH except when running a program that may be run with elevated privileges in the suid flow. Defaults to $PATH: followed by standard system paths. ${prefix}/libexec/apptainer/bin is also implied as the first component, either as the first directory of $PATH if present or simply as the first directory if $PATH is not included. Configuration variables for paths to individual programs that were in apptainer.conf (cryptsetup, go, ldconfig, msquashfs, unsquashfs, and nvidia-container-cli) have been removed.
  • The --nvccli option now works without --fakeroot. In that case the option can be used with --writable-tmpfs instead of --writable, and --writable-tmpfs is implied if neither option is given. Note that also /usr/bin has to be writable by the user, so without --fakeroot that probably requires a sandbox image that was built with --fix-perms.
  • The --nvccli option now implies --nv.
  • $HOME is now used to find the user's configuration and cache by default. If that is not set it will fall back to the previous behavior of looking up the home directory in the password file. The value of $HOME inside the container still defaults to the home directory in the password file and can still be overridden by the --home option.
  • When starting a container, if the user has specified the cwd by using the --pwd flag, if there is a problem an error is returned instead of defaulting to a different directory.
  • Nesting of bind mounts now works even when a --bind option specified a different source and destination with a colon between them. Now the APPTAINER_BIND environment variable makes sure the bind source is from the bind destination so it will be successfully re-bound into a nested apptainer container.
  • The warning about more than 50 bind mounts required for an underlay bind has been changed to an info message.
  • oci mount sets Process.Terminal: true when creating an OCI config.json, so that oci run provides expected interactive behavior by default.
  • The default hostname for oci mount containers is now apptainer instead of mrsdalloway.
  • systemd is now supported and used as the default cgroups manager. Set systemd cgroups = no in apptainer.conf to manage cgroups directly via the cgroupfs.
  • Plugins must be compiled from inside the Apptainer source directory, and will use the main Apptainer go.mod file. Required for Go 1.18 support.
  • Apptainer now requires squashfs-tools >=4.3, which is satisfied by current EL / Ubuntu / Debian and other distributions.
  • Added a new action flag --no-eval which:
    • Prevents shell evaluation of APPTAINERENV_ / --env / --env-file environment variables as they are injected in the container, to match OCI behavior. Applies to all containers.
    • Prevents shell evaluation of the values of CMD / ENTRYPOINT and command line arguments for containers run or built directly from an OCI/Docker source. Applies to newly built containers only, use apptainer inspect to check version that container was built with.
  • Added --no-eval to the list of flags set by the OCI/Docker --compat mode.
  • sinit process has been renamed to appinit.
  • Added --keysdir to key command to provide an alternative way of setting local keyring path. The existing reading of the keyring path from environment variable 'APPTAINER_KEYSDIR' is untouched.
  • apptainer key push will output the key server's response if included in order to help guide users through any identity verification the server may require.
  • ECL no longer requires verification for all signatures, but only when signature verification would alter the expected behavior of the list:
    • At least one matching signature included in a whitelist must be validated, but other unvalidated signatures do not cause ECL to fail.
    • All matching signatures included in a whitestrict must be validated, but unvalidated signatures not in the whitestrict do not cause ECL to fail.
    • Signature verification is not checked for a blacklist; unvalidated signatures can still block execution via ECL, and unvalidated signatures not in the blacklist do not cause ECL to fail.
  • Improved wildcard matching in the %files directive of build definition files by replacing usage of sh with the mvdan.cc library.

New features / functionalities

  • Non-root users can now use --apply-cgroups with run/shell/exec to limit container resource usage on a system using cgroups v2 and the systemd cgroups manager.
  • Native cgroups v2 resource limits can be specified using the [unified] key in a cgroups toml file applied via --apply-cgroups.
  • Added --cpu*, --blkio*, --memory*, --pids-limit flags to apply cgroups resource limits to a container directly.
  • Added instance stats command.
  • Added support for a custom hashbang in the %test section of an Apptainer recipe (akin to the runscript and start sections).
  • The --no-mount flag & APPTAINER_NO_MOUNT env var can now be used to disable a bind path entry from apptainer.conf by specifying the absolute path to the destination of the bind.
  • Apptainer now supports the riscv64 architecture.
  • remote add --insecure may now be used to configure endpoints that are only accessible via http. Alternatively the environment variable APPTAINER_ADD_INSECURE can be set to true to allow http remotes to be added without the --insecure flag. Specifying https in the remote URI overrules both --insecure and APPTAINER_ADD_INSECURE.
  • Gpu flags --nv and --rocm can now be used from an apptainer nested inside another apptainer container.
  • Added --public, --secret, and --both flags to the key remove command to support removing secret keys from the apptainer keyring.
  • Debug output can now be enabled by setting the APPTAINER_DEBUG env var.
  • Debug output is now shown for nested apptainer calls, in wrapped unsquashfs image extraction, and build stages.
  • Added EL9 package builds to CI for GitHub releases.
  • Added confURL & Include parameters to the Arch packer for alternate pacman.conf URL and alternate installed (meta)package.

Bug fixes

  • Remove warning message about SINGULARITY and APPTAINER variables having different values when the SINGULARITY variable is not set.
  • Fixed longstanding bug in the underlay logic when there are nested bind points separated by more than one path level, for example /var and /var/lib/yum, and the path didn't exist in the container image. The bug only caused an error when there was a directory in the container image that didn't exist on the host.
  • Add specific error for unreadable image / overlay file.
  • Pass through a literal \n in host environment variables to the container.
  • Allow newgidmap / newuidmap that use capabilities instead of setuid root.
  • Fix compilation on mipsel.
  • Fix test code that implied %test -c <shell> was supported - it is not.
  • Fix loop device creation with loop-control when running inside docker containers.
  • Fix the issue that the oras protocol would ignore the --no-https/--nohttps flag.
  • Fix oras image push to registries with authorization servers not supporting multiple scope query parameter.
  • Improved error handling of unsupported password protected PEM files with encrypted containers.
  • Ensure bootstrap_history directory is populated with previous definition files, present in source containers used in a build.

v1.0.3 - [2022-07-06]

Bug fixes

  • Process redirects that can come from sregistry with a library:// URL.
  • Fix inspect --deffile and inspect --all to correctly show definition files in sandbox container images instead of empty output. This has a side effect of also fixing the storing of definition files in the metadata of sif files built by Apptainer, because that metadata is constructed by doing inspect --all.

v1.0.2 - [2022-05-09]

Bug fixes

  • Fixed FATAL error thrown by user configuration migration code that caused users with inaccessible home directories to be unable to use apptainer commands.
  • The Debian package now conflicts with the singularity-container package.
  • Do not truncate environment variables with commas.
  • Use HEAD request when checking digest of remote OCI image sources, with GET as a fall-back. Greatly reduces Apptainer's impact on Docker Hub API limits.

v1.0.1 - [2022-03-15]

Bug fixes

  • Don't prompt for y/n to overwrite an existing file when build is called from a non-interactive environment. Fail with an error.
  • Preload NSS libraries prior to mountspace name creation to avoid circumstances that can cause loading those libraries from the container image instead of the host, for example in the startup environment.
  • Fix race condition where newly created loop devices can sometimes not be opened.
  • Support nvidia-container-cli v1.8.0 and above, via fix to capability set.

v1.0.0 - [2022-03-02]

Comparison to SingularityCE

This release has most of the new features, bug fixes, and changes that went into SingularityCE up through their version 3.9.5, except where the maintainers of Apptainer disagreed with what went into SingularityCE since the project fork. The biggest difference is that Apptainer does not support the --nvccli option in privileged mode. This release also has the additional major feature of instance checkpointing which isn't in SingularityCE. Other differences due to re-branding are in the next section.

Changes due to the project re-branding

  • The primary executable has been changed from singularity to apptainer. However, a singularity command symlink alias has been created pointing to the apptainer command. The contents of containers are unchanged and continue to use the singularity name for startup scripts, etc.
  • The configuration directory has changed from /etc/singularity to /etc/apptainer within packages, and the primary configuration file name has changed from singularity.conf to apptainer.conf. As long as a singularity directory still exists next to an apptainer directory, running the apptainer command will print a warning saying that migration is not complete. If no changes had been made to the configuration then an rpm package upgrade should automatically remove the old directory, otherwise the system administrator needs to take care of migrating the configuration and removing the old directory. Old configuration can be removed for a Debian package with apt-get purge singularity or dpkg -P singularity.
  • The per-user configuration directory has changed from ~/.singularity to ~/.apptainer. The first time the apptainer command accesses the user configuration directory, relevant configuration is automatically imported from the old directory to the new one.
  • Environment variables have all been changed to have an APPTAINER prefix instead of a SINGULARITY prefix. However, SINGULARITY prefix variables are still recognized. If only a SINGULARITY prefix variable exists, a warning will be printed about deprecated usage and then the value will be used. If both prefixes exist and the value is the same, no warning is printed; this is the recommended method to set environment variables for those who need to support both apptainer and singularity. If both prefixes exist for the same variable and the value is different then a warning is also printed.
  • The default SylabsCloud remote endpoint has been removed and replaced by one called DefaultRemote which has no defined server for the library:// URI. The previous default can be restored by following the directions in the documentation.
  • The DefaultRemote's key server is https://keys.openpgp.org instead of the Sylabs key server.
  • The apptainer build --remote option has been removed because there is no standard protocol or non-commercial service that supports it.

Other changed defaults / behaviours since Singularity 3.8.x

  • Auto-generate release assets including the distribution tarball and rpm (built on CentOS 7) and deb (built on Debian 11) x86_64 packages.
  • LABELs from Docker/OCI images are now inherited. This fixes a longstanding regression from Singularity 2.x. Note that you will now need to use --force in a build to override a label that already exists in the source Docker/OCI container.
  • Removed --nonet flag, which was intended to disable networking for in-VM execution, but has no effect.
  • --nohttps flag has been deprecated in favour of --no-https. The old flag is still accepted, but will display a deprecation warning.
  • Paths for cryptsetup, go, ldconfig, mksquashfs, nvidia-container-cli, unsquashfs are now found at build time by mconfig and written into apptainer.conf. The path to these executables can be overridden by changing the value in apptainer.conf.
  • When calling ldconfig to find GPU libraries, apptainer will not fall back to /sbin/ldconfig if the configured ldconfig errors. If installing in a Guix/Nix on environment on top of a standard host distribution you must set ldconfig path = /sbin/ldconfig to use the host distribution ldconfig to find GPU libraries.
  • --nv will not call nvidia-container-cli to find host libraries, unless the new experimental GPU setup flow that employs nvidia-container-cli for all GPU related operations is enabled (see more below).
  • If a container is run with --nvccli and --contain, only GPU devices specified via the NVIDIA_VISIBLE_DEVICES environment variable will be exposed within the container. Use NVIDIA_VISIBLE_DEVICES=all to access all GPUs inside a container run with --nvccli. See more on --nvccli under New features below.
  • Example log-plugin rewritten as a CLI callback that can log all commands executed, instead of only container execution, and has access to command arguments.
  • The bundled reference CNI plugins are updated to v1.0.1. The flannel plugin is no longer included, as it is maintained as a separate plugin at: https://github.com/flannel-io/cni-plugin. If you use the flannel CNI plugin you should install it from this repository.
  • Instances are no longer created with an IPC namespace by default. An IPC namespace can be specified with the -i|--ipc flag.
  • The behaviour of the allow container directives in apptainer.conf has been modified, to support more intuitive limitations on the usage of SIF and non-SIF container images. If you use these directives, you may need to make changes to apptainer.conf to preserve behaviour.
    • A new allow container sif directive permits or denies usage of unencrypted SIF images, irrespective of the filesystem(s) inside the SIF.
    • The allow container encrypted directive permits or denies usage of SIF images with an encrypted root filesystem.
    • The allow container squashfs/extfs directives in apptainer.conf permit or deny usage of bare SquashFS and EXT image files only.
    • The effect of the allow container dir directive is unchanged.
  • --bind, --nv and --rocm options for build command can't be set through environment variables APPTAINER_BIND, APPTAINER_BINDPATH, APPTAINER_NV, APPTAINER_ROCM anymore due to side effects reported by users in this issue, they must be explicitly requested via command line.
  • Build --bind option allows to set multiple bind mounts without specifying the --bind option for each bindings.
  • Honor image binds and user binds in the order they're given instead of always doing image binds first.
  • Remove subshell overhead when processing large environments on container startup.
  • make install now installs man pages. A separate make man is not required. As a consequence, man pages are now included in deb packages.

New features / functionalities

  • Experimental support for checkpointing of instances using DMTCP has been added. Additional flags --dmtcp-launch and --dmtcp-restart has been added to the apptainer instance start command, and a checkpoint command group has been added to manage the checkpoint state. A new /etc/apptainer/dmtcp-conf.yaml configuration file is also added. Limitations are that it can only work with dynamically linked applications and the container has to be based on glibc.
  • --writable-tmpfs can be used with apptainer build to run the %test section of the build with a ephemeral tmpfs overlay, permitting tests that write to the container filesystem.
  • The --compat flag for actions is a new short-hand to enable a number of options that increase OCI/Docker compatibility. Infers --containall, --no-init, --no-umask, --writable-tmpfs. Does not use user, uts, or network namespaces as these may not be supported on many installations.
  • The experimental --nvccli flag will use nvidia-container-cli to setup the container for Nvidia GPU operation. Apptainer will not bind GPU libraries itself. Environment variables that are used with Nvidia's docker-nvidia runtime to configure GPU visibility / driver capabilities & requirements are parsed by the --nvccli flag from the environment of the calling user. By default, the compute and utility GPU capabilities are configured. The use nvidia-container-cli option in apptainer.conf can be set to yes to always use nvidia-container-cli when supported. --nvccli is not supported in the setuid workflow, and it requires being used in combination with --writable in user namespace mode. Please see documentation for more details.
  • The --apply-cgroups flag can be used to apply cgroups resource and device restrictions on a system using the v2 unified cgroups hierarchy. The resource restrictions must still be specified in the v1 / OCI format, which will be translated into v2 cgroups resource restrictions, and eBPF device restrictions.
  • A new --mount flag and APPTAINER_MOUNT environment variable can be used to specify bind mounts in type=bind,source=<src>,destination=<dst>[,options...] format. This improves CLI compatibility with other runtimes, and allows binding paths containing : and , characters (using CSV style escaping).
  • Perform concurrent multi-part downloads for library:// URIs. Uses 3 concurrent downloads by default, and is configurable in apptainer.conf or via environment variables.

Bug fixes

  • The oci commands will operate on systems that use the v2 unified cgroups hierarchy.
  • Ensure invalid values passed to config global --set cannot lead to an empty configuration file being written.
  • --no-https now applies to connections made to library services specified in library://<hostname>/... URIs.
  • Ensure gengodep in build uses vendor dir when present.
  • Correct documentation for sign command r.e. source of key index.
  • Restructure loop device discovery to address EAGAIN issue.
  • Ensure a local build does not fail unnecessarily if a keyserver config cannot be retrieved from the remote endpoint.
  • Update dependency to correctly unset variables in container startup environment processing. Fixes regression introduced in singularity-3.8.5.
  • Correct library bindings for unsquashfs containment. Fixes errors where resolved library filename does not match library filename in binary (e.g. EL8, POWER9 with glibc-hwcaps).
  • Remove python as a dependency of the debian package.
  • Increase the TLS Handshake Timeout for the busybox bootstrap agent in build definition files to 60 seconds.
  • Add binutils-gold to the build requirements on SUSE rpm builds.

Changes for Testing / Development

  • E2E_DOCKER_MIRROR and E2E_DOCKER_MIRROR_INSECURE were added to allow to use a registry mirror (or a pull through cache).
  • A tools source directory was added with a Dockerfile for doing local e2e testing.