Skip to content

Latest commit

 

History

History
152 lines (115 loc) · 5.99 KB

README.adoc

File metadata and controls

152 lines (115 loc) · 5.99 KB
Raw

Camel Dynamic Router EIP Component Spring Boot Examples

This Camel Dynamic Router Spring Boot example module contains applications highlighting the two main use cases of the Dynamic Router EIP component.

Single JVM Example

This example shows how you can route messages within a single application, or JVM.

Build the Single JVM Example

mvn clean package -pl :camel-example-spring-boot-dynamic-router-eip-single

Run the Single JVM Example

mvn spring-boot:run -pl :camel-example-spring-boot-dynamic-router-eip-single

Access the Swagger UI

Next, point your browser to http://localhost:8080/dynamic-router-example/swagger-ui.html. Here, you will find a single endpoint to interact with, called /generate. Expand the section by clicking on the colored bar, and click on the Try it out button. There is only one field to fill in, and that is the number of messages that you want to send through the dynamic router. Enter a number, and then press the Execute button. You will see a Loading animation while the messages are being processed.

Multiple JVM (Multimodule) Example

This example shows how you can route messages between separate modules, where each runs in its own JVM.

Build the Multimodule Example

For systems with Docker

mvn clean package -f dynamic-router-eip/dynamic-router-eip-stack -Pdocker

For systems with Podman

mvn clean package -f dynamic-router-eip/dynamic-router-eip-stack -Ppodman

On a system with Podman, your output might resemble the following:

Emulate Docker CLI using podman. Create /etc/containers/nodocker to quiet msg.
>>>> Executing external compose provider "/usr/bin/docker-compose". Please refer to the documentation for details. <<<<

[+] Running 6/6
 ✔ Network docker_test-dynamic-router  Created  0.0s
 ✔ Container broker                    Healthy  0.1s
 ✔ Container main_router_service       Healthy  0.1s
 ✔ Container odd_numbers_service       Started  0.1s
 ✔ Container even_numbers_service      Started  0.1s
 ✔ Container all_numbers_service       Started  0.1s

Run the Multimodule Example

When running the application stack for the Multimodule example, it should be the same, whether you have Docker or Podman installed. For Podman, please confirm that you have podman compose installed to ensure that you can emulate the Docker CLI when using Podman.

docker compose -f dynamic-router-eip/dynamic-router-eip-stack/project-resources/docker/docker-compose.yaml up -d

Access the Swagger UI

Next, point your browser to http://localhost:8082/main-router/swagger-ui.html. Here, you will find a few endpoints to interact with.

Generate number messages

The first endpoint is /generate. Expand the section by clicking on the colored bar, and click on the Try it out button. There is only one field to fill in, and that is the number of messages that you want to send through the dynamic router. Enter a number, and then press the Execute button. You will see a Loading animation while the messages are being generated. This will be very brief, since the message generation happens in its own thread, and everything at this point happens asynchronously.

Retrieve number statistics

From the moment messages begin to flow through the system, statistics are compiled. You can monitor the progress by using the next endpoint: /counts. Expand the section by clicking on the colored bar, and click on the Try it out button. Click the Execute button, and the current statistics will be displayed. These will continue to count upward until the current batch of messages has completed.

A run of one million messages might yield output that resembles the following:

{
  "all": 1000000,
  "odd": 500000,
  "elapsed seconds": 19,
  "even": 500000
}
View subscriber information

This endpoint allows you to see the routing participants that have subscribed for dynamic routing. Expand the endpoint for /list{channel}. Clicking the Try it out button will allow you to enter the channel name. For this example app, you should enter numbers in that field, and then click the Execute button. The returned text should look like this, although the formatting has been altered for better documentation clarity:

[
  PrioritizedFilterProcessor [
    id: processAllNumbers,
    priority: 5,
    predicate: SpelExpression[
      #{headers.command == 'processNumber' or headers.command == 'resetStats'}
    ],
    endpoint: kafka://numbers_all?groupInstanceId=numbers_all_consumer&headerDeserializer=#stringValueHeaderDeserializer
  ],
  PrioritizedFilterProcessor [
    id: processEvenNumbers,
    priority: 10,
    predicate: SpelExpression[
      #{(headers.command == 'processNumber' and headers.number matches '\d*[02468]') or
          headers.command == 'resetStats'}
    ],
    endpoint: kafka://numbers_even?groupInstanceId=numbers_even_consumer&headerDeserializer=#stringValueHeaderDeserializer
  ],
  PrioritizedFilterProcessor [
    id: processNumberStats,
    priority: 10,
    predicate: SpelExpression[
      #{headers.command == 'stats'}
    ],
    endpoint: kafka://main_router?groupInstanceId=main_router_consumer&headerDeserializer=#stringValueHeaderDeserializer
  ],
  PrioritizedFilterProcessor [
    id: processOddNumbers,
    priority: 10,
    predicate: SpelExpression[
      #{(headers.command == 'processNumber' and headers.number matches '\d*[13579]') or
          headers.command == 'resetStats'}
    ],
    endpoint: kafka://numbers_odd?groupInstanceId=numbers_odd_consumer&headerDeserializer=#stringValueHeaderDeserializer
  ]
]

Help and Contributions

If you hit any problem using Camel or have some feedback, then please let us know.

We also love contributors, so please get involved

The Camel riders!