Router Template #15
Comments
|
If a 'strumebt bezel' is a bezel that accommodates one or more encoders, then the template is used with a router and a 'flush' bit to remove the material (wood, plastic) to make space to install an encoder. I've used it to install encoders required in a C172 open cockpit which I completed last year. Without Allen's printed 3D files for printing the bezels, I think I'd still be trying to learn 3D software rather than building the cockpit.
|
|
That's beautiful what you have built and thank you for the reply.
I will certainly be printing all the bezels and understand what a router
template "should" be used for, but cannot see how the printed router
template supplied, was to be used.
Sorry if I'm sounding so dumb, but maybe I will just need to print it and
try to figure it out.
Thanks again for the reply.
JT
…On Tue., Jun. 2, 2020, 10:41 a.m. JJMalette, ***@***.***> wrote:
If a 'strumebt bezel' is a bezel that accommodates one or more encoders,
then the template is used with a router and a 'flush' bit to remove the
material (wood, plastic) to make space to install an encoder. I've used it
to install encoders required in a C172 open cockpit which I completed last
year. Without Allen's printed 3D files for printing the bezels, I think I'd
still be trying to learn 3D software rather than building the cockpit.
[image: DSC_0017 MODIFIED]
<https://user-images.githubusercontent.com/42695696/83533311-6e07ca80-a4bd-11ea-9d2b-77fce2aeda2f.JPG>
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#15 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ABNPQ7UWEBWRBOKWZKS4FJDRUUFPZANCNFSM4NP5E43Q>
.
|
|
Hi JT,
Within the next couple of days, I’ll send you one or more pictures that will hopefully give you a hint or two! Please be patient, I’m undergoing chemotherapy treatments which cause me to be useless on some days. I have cancer of the bladder which many people have had and are today near top-shape. I remain positive and keep busy with fliightsim projects including helping others realize their dream.
All the best, JJ
From: JTRACKER
Sent: Tuesday, June 2, 2020 11:12 AM
To: allanglen/c172-flight-sim-panel
Cc: JJMalette ; Comment
Subject: Re: [allanglen/c172-flight-sim-panel] Router Template (#15)
That's beautiful what you have built and thank you for the reply.
I will certainly be printing all the bezels and understand what a router
template "should" be used for, but cannot see how the printed router
template supplied, was to be used.
Sorry if I'm sounding so dumb, but maybe I will just need to print it and
try to figure it out.
Thanks again for the reply.
JT
On Tue., Jun. 2, 2020, 10:41 a.m. JJMalette, ***@***.***> wrote:
If a 'strumebt bezel' is a bezel that accommodates one or more encoders,
then the template is used with a router and a 'flush' bit to remove the
material (wood, plastic) to make space to install an encoder. I've used it
to install encoders required in a C172 open cockpit which I completed last
year. Without Allen's printed 3D files for printing the bezels, I think I'd
still be trying to learn 3D software rather than building the cockpit.
[image: DSC_0017 MODIFIED]
<https://user-images.githubusercontent.com/42695696/83533311-6e07ca80-a4bd-11ea-9d2b-77fce2aeda2f.JPG>
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#15 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ABNPQ7UWEBWRBOKWZKS4FJDRUUFPZANCNFSM4NP5E43Q>
.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
|
|
I would prefer you rest and get well. My sister went through years of
chemo and am familiar with the exercise and difficulties of cancer - from
the observer side.
Please take care of yourself and don't worry about my inquiry.
JT
…On Tue, Jun 2, 2020 at 11:25 AM JJMalette ***@***.***> wrote:
Hi JT,
Within the next couple of days, I’ll send you one or more pictures that
will hopefully give you a hint or two! Please be patient, I’m undergoing
chemotherapy treatments which cause me to be useless on some days. I have
cancer of the bladder which many people have had and are today near
top-shape. I remain positive and keep busy with fliightsim projects
including helping others realize their dream.
All the best, JJ
From: JTRACKER
Sent: Tuesday, June 2, 2020 11:12 AM
To: allanglen/c172-flight-sim-panel
Cc: JJMalette ; Comment
Subject: Re: [allanglen/c172-flight-sim-panel] Router Template (#15)
That's beautiful what you have built and thank you for the reply.
I will certainly be printing all the bezels and understand what a router
template "should" be used for, but cannot see how the printed router
template supplied, was to be used.
Sorry if I'm sounding so dumb, but maybe I will just need to print it and
try to figure it out.
Thanks again for the reply.
JT
On Tue., Jun. 2, 2020, 10:41 a.m. JJMalette, ***@***.***>
wrote:
> If a 'strumebt bezel' is a bezel that accommodates one or more encoders,
> then the template is used with a router and a 'flush' bit to remove the
> material (wood, plastic) to make space to install an encoder. I've used
it
> to install encoders required in a C172 open cockpit which I completed
last
> year. Without Allen's printed 3D files for printing the bezels, I think
I'd
> still be trying to learn 3D software rather than building the cockpit.
>
> [image: DSC_0017 MODIFIED]
> <
https://user-images.githubusercontent.com/42695696/83533311-6e07ca80-a4bd-11ea-9d2b-77fce2aeda2f.JPG
>
>
> —
> You are receiving this because you authored the thread.
> Reply to this email directly, view it on GitHub
> <
#15 (comment)
>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/ABNPQ7UWEBWRBOKWZKS4FJDRUUFPZANCNFSM4NP5E43Q
>
> .
>
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#15 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ABNPQ7VK6DBG5QUMNW6RUVDRUUKVPANCNFSM4NP5E43Q>
.
[image: image.gif]
|
|
You’re very kind JT. But luckily I do have good days and it’s on those days that I enjoy life by engaging in worthwhile things for me and others.
Sent from Mail for Windows 10
From: JTRACKER
Sent: June 2, 2020 12:49 PM
To: allanglen/c172-flight-sim-panel
Cc: JJMalette; Comment
Subject: Re: [allanglen/c172-flight-sim-panel] Router Template (#15)
I would prefer you rest and get well. My sister went through years of
chemo and am familiar with the exercise and difficulties of cancer - from
the observer side.
Please take care of yourself and don't worry about my inquiry.
JT
On Tue, Jun 2, 2020 at 11:25 AM JJMalette ***@***.***> wrote:
Hi JT,
Within the next couple of days, I’ll send you one or more pictures that
will hopefully give you a hint or two! Please be patient, I’m undergoing
chemotherapy treatments which cause me to be useless on some days. I have
cancer of the bladder which many people have had and are today near
top-shape. I remain positive and keep busy with fliightsim projects
including helping others realize their dream.
All the best, JJ
From: JTRACKER
Sent: Tuesday, June 2, 2020 11:12 AM
To: allanglen/c172-flight-sim-panel
Cc: JJMalette ; Comment
Subject: Re: [allanglen/c172-flight-sim-panel] Router Template (#15)
That's beautiful what you have built and thank you for the reply.
I will certainly be printing all the bezels and understand what a router
template "should" be used for, but cannot see how the printed router
template supplied, was to be used.
Sorry if I'm sounding so dumb, but maybe I will just need to print it and
try to figure it out.
Thanks again for the reply.
JT
On Tue., Jun. 2, 2020, 10:41 a.m. JJMalette, ***@***.***>
wrote:
> If a 'strumebt bezel' is a bezel that accommodates one or more encoders,
> then the template is used with a router and a 'flush' bit to remove the
> material (wood, plastic) to make space to install an encoder. I've used
it
> to install encoders required in a C172 open cockpit which I completed
last
> year. Without Allen's printed 3D files for printing the bezels, I think
I'd
> still be trying to learn 3D software rather than building the cockpit.
>
> [image: DSC_0017 MODIFIED]
> <
https://user-images.githubusercontent.com/42695696/83533311-6e07ca80-a4bd-11ea-9d2b-77fce2aeda2f.JPG
>
>
> —
> You are receiving this because you authored the thread.
> Reply to this email directly, view it on GitHub
> <
#15 (comment)
>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/ABNPQ7UWEBWRBOKWZKS4FJDRUUFPZANCNFSM4NP5E43Q
>
> .
>
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#15 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ABNPQ7VK6DBG5QUMNW6RUVDRUUKVPANCNFSM4NP5E43Q>
.
[image: image.gif]
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
|
|
Good Day Sir,
How is life treating you and how are you managing your treatment? I hope
things are doing well and the chemo is not giving too many terrible side
effects.
Hopefully you will be able to get back to normal as soon as possible.
Regards,
Jeff Thompson
On Tue, Jun 2, 2020 at 12:48 PM Jeffrey Thompson <sattracker@gmail.com>
wrote:
… I would prefer you rest and get well. My sister went through years of
chemo and am familiar with the exercise and difficulties of cancer - from
the observer side.
Please take care of yourself and don't worry about my inquiry.
JT
On Tue, Jun 2, 2020 at 11:25 AM JJMalette ***@***.***>
wrote:
> Hi JT,
>
> Within the next couple of days, I’ll send you one or more pictures that
> will hopefully give you a hint or two! Please be patient, I’m undergoing
> chemotherapy treatments which cause me to be useless on some days. I have
> cancer of the bladder which many people have had and are today near
> top-shape. I remain positive and keep busy with fliightsim projects
> including helping others realize their dream.
>
> All the best, JJ
>
> From: JTRACKER
> Sent: Tuesday, June 2, 2020 11:12 AM
> To: allanglen/c172-flight-sim-panel
> Cc: JJMalette ; Comment
> Subject: Re: [allanglen/c172-flight-sim-panel] Router Template (#15)
>
> That's beautiful what you have built and thank you for the reply.
>
> I will certainly be printing all the bezels and understand what a router
> template "should" be used for, but cannot see how the printed router
> template supplied, was to be used.
>
> Sorry if I'm sounding so dumb, but maybe I will just need to print it and
> try to figure it out.
>
> Thanks again for the reply.
>
> JT
>
>
>
> On Tue., Jun. 2, 2020, 10:41 a.m. JJMalette, ***@***.***>
> wrote:
>
> > If a 'strumebt bezel' is a bezel that accommodates one or more encoders,
> > then the template is used with a router and a 'flush' bit to remove the
> > material (wood, plastic) to make space to install an encoder. I've used
> it
> > to install encoders required in a C172 open cockpit which I completed
> last
> > year. Without Allen's printed 3D files for printing the bezels, I think
> I'd
> > still be trying to learn 3D software rather than building the cockpit.
> >
> > [image: DSC_0017 MODIFIED]
> > <
> https://user-images.githubusercontent.com/42695696/83533311-6e07ca80-a4bd-11ea-9d2b-77fce2aeda2f.JPG
> >
> >
> > —
> > You are receiving this because you authored the thread.
> > Reply to this email directly, view it on GitHub
> > <
> #15 (comment)
> >,
> > or unsubscribe
> > <
> https://github.com/notifications/unsubscribe-auth/ABNPQ7UWEBWRBOKWZKS4FJDRUUFPZANCNFSM4NP5E43Q
> >
> > .
> >
>
> —
> You are receiving this because you commented.
> Reply to this email directly, view it on GitHub, or unsubscribe.
>
> —
> You are receiving this because you authored the thread.
> Reply to this email directly, view it on GitHub
> <#15 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/ABNPQ7VK6DBG5QUMNW6RUVDRUUKVPANCNFSM4NP5E43Q>
> .
> [image: image.gif]
>
>
|
|
The router template is setup so that you can place it into the 3 1/8" hole you have cut into your 1/4 board. Then use a flush trim bit in your router so that it follows the inside of the router template. Here is a video for using Flush Trim bits with a router that might help: Good luck! |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Has anyone used the 3d printed router Template for the I strumebt bezel?
I am curious how it's used.
The text was updated successfully, but these errors were encountered: