Help

[PR0TX]

Please help me set up the miner

I'm new to this and have never used a crypto wallet.

As I understand it, I specified the pull correctly, but I don’t understand how to correctly indicate the wallet address

I registered on metamask with an ETH wallet
As I understand it, the first thing should be the wallet address, then the name itself (you can enter {COMPUTERNAME}), but I don’t understand where to get WithdrawalPassword in metamask
0xea6feae9d7a2a36d50ca3195216a490a8435946d.{COMPUTERNAME}/WithdrawalPassword ?

And also I see in the panel that the PC is mining, but you can somehow check that it is mining on the pool itself, as I understand it can be done like this https://ethw.nanopool.org/search?address=0xea6feae9d7a2a36d50ca3195216a490a8435946d

I would be very grateful for any help

[UnamSanctam]

Yes 0xea6feae9d7a2a36d50ca3195216a490a8435946d.{COMPUTERNAME}/WithdrawalPassword would be the correct wallet to use, in which case WithdrawalPassword would be the password you'd use to change the payout on nanopool. Though keep in mind that you're trying to mine ETHW and not ETC or ETH, and the algorithm you have chosen (etchash) is for ETC mining.

[PR0TX]

Thank you very much for your reply, I really appreciate it

Sorry for such stupid questions (I'm sure they are very simple), I've just never worked with crypto wallets.
And you are not obligated to answer them and waste your precious time (but I still really appreciate your work and help)

I still have a couple of questions (if it’s not difficult for you to answer them):

1. I decided to mine Zano and chose poll https://supportcryptonight.com/zano, I also created an official Zano wallet and there I only have the wallet address without Payment ID, I saw that on supportcryptonight.com it seems to be written that he too is not required, so do I need to insert this Payment ID for mining on this pool (and not only), and is it better for me to use tradeogre.com?
   

2.how can I accurately check whether my miner is mining? I saw that you wrote that you need to wait, but for some reason this pool writes in the statistics of my wallet that it cannot connect (even 1 hour after mining).

3. At what point is the miner config replaced, that is, I created a config in the panel, and for example replaced the wallet or pool, I saved the config and, for example, selected it in the miner and it wrote to me that “Updated Successfully”, how long will it take for this to apply, that is, after reboot or after a certain time, and can I select a config while the miner is offline and when it starts it will select it?
   

[UnamSanctam]

I decided to mine Zano and chose poll https://supportcryptonight.com/zano, I also created an official Zano wallet and there I only have the wallet address without Payment ID, I saw that on supportcryptonight.com it seems to be written that he too is not required, so do I need to insert this Payment ID for mining on this pool (and not only), and is it better for me to use tradeogre.com?

Payment ID's only have to do with paying certain things, there's no Payment ID required for mining. You should just enter the wallet address from the wallet you created when mining. When sending Zano from your wallet to TradeOgre then you'll need to enter the Payment ID in that transaction.

how can I accurately check whether my miner is mining? I saw that you wrote that you need to wait, but for some reason this pool writes in the statistics of my wallet that it cannot connect (even 1 hour after mining).

Checking on the pool like you're doing is one way of doing it, in your web panel does it say that your miner is Active and has a hashrate?
But there have been problems with Zano pools after the biggest ones closed down, you can try mining Neurai or Neoxa, they are both on 2miners (the pool) and don't require a lot of VRAM (GPU memory) to mine.

At what point is the miner config replaced, that is, I created a config in the panel, and for example replaced the wallet or pool, I saved the config and, for example, selected it in the miner and it wrote to me that “Updated Successfully”, how long will it take for this to apply, that is, after reboot or after a certain time, and can I select a config while the miner is offline and when it starts it will select it?

Since the miner contacts the web panel on startup and then once every 1 minute then that's whenever they get and apply the settings.

[PR0TX]

Checking on the pool like you're doing is one way of doing it, in your web panel does it say that your miner is Active and has a hashrate?

This is how mining was displayed for me, about 15 Mh, but for some reason it was not displayed on the pool itself

And also I changed the mining method in the panel and for some reason the miner does not work now (perhaps it is related to the connection scheme)

[UnamSanctam]

It will show up on the pool once a share is found.