diff --git a/CHANGELOG b/CHANGELOG index 51d717bdd..f1c24a570 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -5,6 +5,124 @@ For more detailed information, please see the git change log and issue tracker hosted on GitHub: https://github.com/nuand/bladeRF ================================================================================ +-------------------------------------------------------------------------------- + 2016.06 (2016-06-29) +-------------------------------------------------------------------------------- + +This release introduces new functionality and bug fixes. It consists of the +following versions: + + * FPGA bitstream v0.6.0 + * FX3 firmware v2.0.0 + * libbladeRF v1.7.2 + * bladeRF-cli v1.4.0 + * MATLAB & Simulink bindings v0.1.2 + +New Features: + +* libbladeRF, bladeRF-cli + - Added SMB clock control functionality + - Added synchronization trigger functionality + - Added XB-300 support + - Added detection for v2.0.0 firmware series (new VID/PID) + +* FPGA + - Added synchronization trigger functionality using J71 header (pin 4) + - Added ADSB top-level architecture for out-of-tree ADSB core + + https://github.com/nuand/bladeRF-adsb + +* FX3 + - 2.x.y series of firmware introduces new VID/PID + +* libbladeRF API documentation + - Re-organized into more cohesive sections + - Added additional clarifications and corrections + +* Miscellaneous: + - Windows builds updated to search for libusb 1.0.20 by default + - Added GNU Radio Companion loopback example + +The following issue tracker items have been closed since 2015.01-rc1: + + * Bugs: + - #474: [libbladeRF] Clarify required SMB clock port config prior to + trigger API usage + - #470: [libbladeRF] VS2012 Build failure (cannot find stdbool.h) + - #468: BLADERF_FORMAT_SC16_Q11_META docs confusing + - #466: [bladeRF-cli] First open fails when device has incompatible + FPGA/FW + - #465: [libbladeRF] TX Timeout Regression + - #462: [invalid] cmake build failure on CentOS 7.2 + - #460: [libbladeRF] Explain when (not) to use bladerf_get_timestamp() + - #459: [invalid] [libbladeRF] Build failure reported on MS VS2013 + - #458: [libbladerf] assertion failed in sync_worker.c, tx_callback + after bug 438 fix + - #457: [libbladeRF] bladerf_sync_tx() clears burst regardless of return + - #454: [debian] bladerf-fpga-hostedx40 leaves bad rbf file around if + the download fails + - #453: [bladeRF-cli] Automatic DC Calibration does not appear to apply + nominal value + - #450: host/common items missing extern "C" { ... } + - #448: Build broken on big-endian targets + - #446: Wrong loopback mode name for Simulink IF + - #354: [hdl] failure to include STP file due to talkback req ought to + be fatal + + * Enhancement: + - #463: Adding SignalTap in scripted build + - #403: LibbladeRF support for setting MIMO mode + - #221: Synchronized Tx/Rx of multiple bladeRFs for MIMO using Mini + Expansion Header + - #174: Migrate FX3 build to CMake-generated Makefile + + * Other: + - #432: Error building on Pi + +Outstanding issue tracker items: + * Bugs: + - #475: [libbladeRF] Windows 10 builds fail if CyFX3 SDK is present + - #473: [Windows][libbladeRF][duplicate] Triggered TX Stalls on Cypress + Backend + - #472: [libbladeRF, FX3] bladerf_device_reset() does not allow + libbladeRF to close device cleanly + - #471: [nios] VCTCXO Trim DAC Readback is implemented incorrectly + - #464: [bladeRF-cli] `probe` can't access already opened devices + (libusb, Windows) + - #447: Build broken on MSVC2015 (ptheads timespec conflict) + - #443: [libbladeRF] Cypress backend timeouts & receiving NULL buffers + upon transfer completion + - #442: [FX3 Firmware] Jump to bootloader after NULL interface is + restored + - #427: [libbladeRF] Cannot set some samplerates returned by + bladerf_set_rational_rate() + - #408: [libbladeRF] Device hangs after repeated open/stream/close + - #401: libusb detection fails when x-compiling for Android + - #390: Warning after running rx start when loopback=firmware + - #360: [hdl] Older FPGA revisions no longer build + - #352: [libbladeRF] Intermittent out-of-order transfer callbacks + with Windows & libusb 1.0.19 + - #301: Direct sampling with XB-200 needs additional improvements + + * Enhancements: + - #452: [Simulink] Integrate Signal Specification to RX + - #439: [libbladeRF] Move submit_stream_buffer implementations up a + layer. (Has pending PR #467) + - #431: Halfband filtering + - #430: Fs/4 Mix + - #428: Low-rate stream formats + - #416: Add CMake project config files + - #395: [hdl] Timing Closure on LMS6 SPI interface + - #382: 'bladerf_get_serial()' fixed buffer size should be ideally + handled in the API + - #321: How about a switch for bladeRF-cli to emit calibration in a + format bladeRF-cli can later read? + - #319: [bladeRF-cli] Add libedit and libreadline support + + * Other: + - #388: [FX3 Firmware] Investigate USB3 drive controls + - #344: [fx3] Investigate/fix field checksums + - #328: [libbladeRF] Review and evaluate use of stream lock WRT libusb + -------------------------------------------------------------------------------- 2016.01-rc1 (2016-01-07) -------------------------------------------------------------------------------- diff --git a/debian/changelog b/debian/changelog index 043693326..e8b368712 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,3 +1,13 @@ +bladerf (2016.06) unstable; urgency=low + + * Added synchronization trigger functionality + * Added SMB clock port control to libbladeRF API + * Added XB-300 support + * Added detection of v2.0.0 firmware series (with new VID/PID) + * FPGA bitstream v0.6.0, FX3 FW v2.0.0, libbladeRF v1.7.2, bladeRF-cli v1.4.0 + + -- Jon Szymaniak Wed, 29 Jun 2016 16:10:35 -0400 + bladerf (2016.01-rc1) unstable; urgency=low * Added support for VCTCXO taming using 1.8V 1 PPS or 10 MHz input signal