v41.0

[nebutech-admin]

feature: ethash 100% LHR unlocker added, for both Windows & Linux.

• Run nbminer with admin priviledge to get 100% LHR unlock
• Tested and verified on drivers: 512.15 for Windows, 510.60 for Linux.
• Other driver versions may have some compatibility issue.
• Previous LHR mode are removed.

---

This discussion was created from the release v41.0.

[VIONICK08]

3080 12gb? 3050?

[BIGguiX]

3080 12gb and 3050 have a diffrent lhr version. doubt they'll be unlocked

[suzwon]

cd /tmp && wget https://github.com/NebuTech/NBMiner/releases/download/v41.0/NBMiner_41.0_Linux.tgz && tar -xvf NBMiner_41.0_Linux.tgz && cd NBMiner_Linux && miner stop && cp nbminer /hive/miners/nbminer/40.1 && miner start

[naman09i]

cd /tmp && wget https://github.com/NebuTech/NBMiner/releases/download/v41.0/NBMiner_41.0_Linux.tgz && tar -xvf NBMiner_41.0_Linux.tgz && cd NBMiner_Linux && miner stop && cp nbminer /hive/miners/nbminer/40.1 && miner start

not able to do so ..after putting the command it agains start 40.1 ? can you explain step by step

[nieXas]

cd /tmp && wget https://github.com/NebuTech/NBMiner/releases/download/v41.0/NBMiner_41.0_Linux.tgz && tar -xvf NBMiner_41.0_Linux.tgz && cd NBMiner_Linux && miner stop && cp nbminer /hive/miners/nbminer/40.1 && miner start

not able to do so ..after putting the command it agains start 40.1 ? can you explain step by step

set the miner to 40.1 instead of the lastest, then retry command

[4DRigMiner]

Estou tendo problemas, fans vai a zero e mineração cai pela metade, alguém sabe resolver? Obrigado

[ansonk4]

Any command for update on hive?

[d2Dreamer]

How you get the problem fixed wioth tmp nbminer. Also Server on Hive down, cant Update Driver

nvidia-driver-update https://us.download.nvidia.com/XFree86/Linux-x86_64/510.60.02/NVIDIA-Linux-x86_64-510.60.02.run

[AdiHash82]

Hey Guys, Im unable to update on HiveOS, when I run the command its downloading the miner but unable to instal. Please help.

2022-05-08 20:39:24 (8.87 MB/s) - ‘NBMiner_41.0_Linux.tgz’ saved [10315775/10315775]

NBMiner_Linux/nbminer
NBMiner_Linux/nbminer.sha256
NBMiner_Linux/readme.md
NBMiner_Linux/start_ae.sh
NBMiner_Linux/start_beam.sh
NBMiner_Linux/start_config.sh
NBMiner_Linux/start_conflux.sh
NBMiner_Linux/start_ergo.sh
NBMiner_Linux/start_etc.sh
NBMiner_Linux/start_eth.sh
NBMiner_Linux/start_rvn.sh
No miner screens found

[AdiHash82]

Ok, sorted now. Up and runing 41.0 Ver. RTX 3080 LHR running 100.9 MH\s straight away. Niiiiice, thanks guys.

[amtmathauda]

How you get the problem fixed wioth tmp nbminer. Also Server on Hive down, cant Update Driver

nvidia-driver-update https://us.download.nvidia.com/XFree86/Linux-x86_64/510.60.02/NVIDIA-Linux-x86_64-510.60.02.run

It's not working for my rig. Pls help.

[amtmathauda]

Ok, sorted now. Up and running 41.3 Ver. RTX 3060 Ti LHR running 58 MH\s on Hiveos.

[sunyao920807]

Looking forward to a low power model！ ts

[xPatrikTwitch]

I dont think there will be a low power mode. This is no lhr and same as FHR gpus. Just drop ur clocks and that way you can get lower power

[BreakingGalaxy]

Hi cool stuff, and thanks for the update but some lhr gpu are not detected as such is there a way to force it? cus i cant find it in the documentation, it doesnt even show up on the console that the lhr unlock was aplied

[BreakingGalaxy]

i reinstalled the drivers reseted the gpus and is working great now

[YAIBDK]

I open on Windows 11 but v41.0 show "access denied" in command line
when im back to v40.1 it's work normally.

Please help. Thanks.

[suzwon]

Run as Administrator

[YAIBDK]

it still the same, thanks.

[Tom5051]

screenshot?

[YAIBDK]

problem solved !

becauase my windows 11 did not show "windows defender"
i had to fix it by https://answers.microsoft.com/en-us/windows/forum/all/windows-defender-broken-on-windows-11-and-wont/c0217d1b-51e7-4323-a003-76220e089eb4

and i add "nbminer.exe" exclusion in windows defender

after that i ran v41.0 as admin

thanks

[Tom5051]

Yep, don't forget about that pesky Windows Defender exclusion :)

[Spicymufinhd]

using 510.60.02 driver in a mixed AMD/Nvidia rig, can't go past DAG verification on the new 41.0 in HiveOs

[orcunver]

same error code 11 restart and restart

[Tom5051]

Saw another post that claimed to fix this by running only Nvidia cards on nbminer and running either a second instance for AMD or a different miner.

[RuaGulu]

Same here with error code 11.

[nebutech-admin]

issue confirmed, will be fixed in the next release.
You can run seperate miner for AMD (use old version) and Nvidia for now.

[magrhino]

I have it working on my mixed rig, try running a different miner for your AMD/FHR cards, and put the LHR on nbminer

[Suren2022]

как запустить от имени админа? щелкаю правой кнопкой мышки на бат файл и нажимаю запустить от имени админа потом появляется командная строка а в ней надпись нажмите любую клавишу

[ghost]

Измените команду bat, чтобы указать путь к папке. Или добавьте путь к системной переменной path. (Гугл переводчик, может быть не точен)

[Tom5051]

Testing now. Looks very good so far. Great job with the LHR unlock, you are legends!

[Tom5051]

was getting:
3060ti - 48mh/s @ 141W
3070ti - 60mh/s @ 195W
3080ti - 92mh/s @ 286W
THANK YOU!!!

[USCMig]

would you mind sharing what your .bat file looks like? I don't typically use nbminer but I'm not setting it up correctly apparently? Also how do you setup the web api stuff?

[Tom5051]

web api is setup by default. Just browse to http://127.0.0.1:22333 on your mining rig.

[b0she]

It works on my 3070, thank you!

[phantasina]

Can the 3060 12g unlockable?

[b0she]

512.15 Install and try

[Tom5051]

Isn't the 3060 v1 already unlocked with driver 470.05

[kelib99]

@Tom5051 Yes, it is. But it must be on Windows and on full PCIe slot.

[Tom5051]

@Tom5051 Yes, it is. But it must be on Windows and on full PCIe slot.
Thanks, I didn't know about the full slot requirement.

[samhaswon]

On Linux, my MSI Ventus 3x RTX 3060 LHR V2 works well (Zotac GTX 1660 also, but no improvement). lolMiner's raw hashrate for it was ~49MH/s and I get about 47-48 with this unlock. This is up from 37.1MH/s on lolMiner and similar on T-Rex miner, so I call this an absolute win! I lost the silicon lottery and can only offset the memory by 2200/1100 (Linux/Windows), but I'll take what I can get.

[NVRFLZ]

3080 12gb, not bad thanks!

[Apollograph]

dont work(

[diguoemo]

you must use 512.15

[Apollograph]

you must use 512.15

no
510.60.02
2 cards in rig 6800 + 3060Ti

[kaitran1910]

Can't mix LHR with AMD card.
I use TeamRedMiner for the AMD one, and NBMiner for the rest LHR

[naman09i]

Can't mix LHR with AMD card.
I use TeamRedMiner for the AMD one, and NBMiner for the rest LHR

are you running on hive or windows ?

[Apollograph]

Can't mix LHR with AMD card.
I use TeamRedMiner for the AMD one, and NBMiner for the rest LHR

are you running on hive or windows ?

hive os bro

[sancak677]

64mhs aldım

[Tom5051]

update to the latest version of HiveOS

[amituofo99]

Having 2 3060 LHR V1 mixed with 1 6700 XT and 1 6900 XT
Running on latest 510.60.02
Code 11 error from NBminer
miner reboot loop

[Siehen]

Use different Miner for AMD Cards. Its now not compatible with AMD

[amituofo99]

Use different Miner for AMD Cards. Its now not compatible with AMD

THANK YOU! IT WORKS NOW!
Used LOLminer for AMD cards
Nbminer for the 3060 LHR cards :) Thank you!

[M0TFF]

Can someone please tell me what clock settings I should use for a RTX 3080 Ti.

[amusleh-spotware-com]

[j1mb0b]

[M0TFF]

Are you using MSI afterburner?

[rztprog]

[rckn333]

dual 3060s, I was testing start_eth to see what I'd get upgrading from an earlier version. I accidently clicked to Start_eth_overclock with the default settings in it, settings kicked in and fans all went to 100%. I closed out the batch but the OC settings remaining, went into afterburner and could not adjust anything. Restarted and it went right back into the same OC settings that I can not adjusted?

What can I do to get back control?

[Stanley20222]

Hello. I have the following problem. Stably once every 30 minutes, mining is reset for 1 second, which I learn from a wifi outlet that notifies of a power drop. The crash happens on all cards at once (nVIDIA) and not just on the LHR version. At the same time, the miner does not show that there was a drop in power or hashrate. Such falls have a very negative effect on the operation of video cards. What can you suggest? Thank you.

[s0laria]

try --no-interrupt ?

[Stanley20222]

Thank you. I'll try

[ilker6]

good day, my 3 pcs msi suprim x rtx 3080ti cards are 200 cores, 2000 memory and at max 92/94 degrees temperatures to keep the temperature constant, pl 300 - 220 -230w values, although I do not experience resets or similar situations in other software, the fan value is 0 and the hash value at random times " It drops to /3".
It does not return to regular operation without turning the system off and on. Still, the LHR breaking process was great, I wish you success and I'm sure you can solve these small problems.

[amusleh-spotware-com]

I have the same issue

[anarki1302988]

Sama Here on 3060ti and 3080s, while 3080ti is getting driver error, even tho using 510.60 and 510.68.
It's not stable at all, can't run a day without issues.

[caramelzane]

I hope I am not jumping the gun. However, I kinda fixed the unstable issue with 3060 V2.

Try Negative Core.

My Settings are:

CC: -500
MM: 2200
PL: 102 - 110 (increment of 1w to get desired hash rate.

[s0laria]

I have Nvidias 3060Ti only, 510.60 driver, Ubuntu 18.04 system.
After about 10 minutes mining on stock memory clocks I'm getting:

ERROR - CUDA Error: unspecified launch failure (err_no=4)
ERROR - Device X exception, exit ...

After the next miner start that GPU remains on 1/3 hashpower, until next reboot.

[s0laria]

OK, further lowering mem clocks helps. After lowering mem -100MHz it's stable for 30 minutes now.

[Aram-Badalyan]

The same problem, it works for 30 minutes and the hashrate drops from 360 to 120. Restarting the miner does not help, only rebooting.

[s0laria]

With lower mem clocks stable around 1 hour, but this error always pops-up on some card sooner or later:

ERROR - CUDA Error: unspecified launch failure (err_no=4)

The miner autorestarts, but that GPU remains on 1/3 hashpower until reboot. I guess the only stable operation for me is to force autoreboot every 30 minutes or so.

[tovimanjer]

[mycevher]

Aynı sıkıntı bende var. Çözüm bulamadım

[Tonyx233]

Can someone share me what clock settings I should use for a RTX 3070 Ti. Thanks!!

[DEGrilloLeon]

I have a couple on a HiveOS rig using these settings:
Core 1275
Mem 1650
PL 220
I'm getting 76-78Mh/s on each, pretty stable I must say

[Tom5051]

core - 0 (not sure why people overclock the GPU core, does nothing on my rigs)
mem - 1550
PL - 196 or 67%
Fan - 100%
82MH/s all day long ETH

[Tom5051]

[MarianoAlv]

i just can not update drivers, any other link from where i can download?

[MarianoAlv]

This one worked:

nvidia-driver-update https://us.download.nvidia.com/XFree86/Linux-x86_64/510.60.02/NVIDIA-Linux-x86_64-510.60.02.run

[andrey-shostik]

Thank you. I have 8 RTX 3060 TI LHR V2, and it's working fine for several hours, but after, some cards falls down to 20 MH/S. Where can be the problem?

[amusleh-spotware-com]

Thank you. I have 8 RTX 3060 TI LHR V2, and it's working fine for several hours, but after some cards falls down to 20 MH/S. Where can be a problem?

İt's a known issue, lots of us have the same issue.

[s0laria]

Lowering the mem clock helps it a little, but the only stable solution for me is simply autorebooting every hour. Perhaps new version will be more stable.

[JuanCruzLopezz]

I can't reach 60 MH on my 3060 Ti, no matter what overclock I set it to, it won't go above 53 MH.

[sunshineyour]

ERROR - CUDA Error: an illegal memory access was encountered (err_no=700)
ERROR - Device 1 exception, exit ...
is bug?

[henryx167]

Hello,

I Have a problem with NBMiner after upgrade to new driver and new miner version.

My current parameters are:
NBMiner 41.0
Nvidia driver: 510.60.02

System info:
INFO - ------------------- System -------------------
INFO - OS: Ubuntu 18.04.6 LTS, 5.10.0-hiveos
INFO - CPU: Intel(R) Pentium(R) D CPU 3.00GHz
INFO - RAM: 3212 MB / 3924 MB
INFO - CU_DRV: 11.6, 510.60.02

GPU info:
=== GPU 0, 04:00.0 GeForce RTX 3060 12288 MB ===
Bios 94.06.14.80.9B, PCIE Link Gen 1, PCIE Link Width 16x
UUID GPU-3ad5224b-fb77-717d-b229-e32a0431ddf8, ROM flash: Not supported
Power Limit: Min 100.0 W, Default 170.0 W, Max 180.0 W, Current 170.0 W
Frequency: GFXCore 210 MHz, MEMCore 405 MHz
Memory: Total 12288 MB, Used 255 MB, Free 12032 MB, Samsung GDDR6
Utilization: GPU 0 %, MEM 20 %, Throttle: Idle
PSTATE P8, PWR 16.0 W, Temp 44 °C, Fan 0 %, RPM 0, RPM 0

When the miner starts I see this ERROR

ERROR - Devices initialize failed.
ERROR - No GPU available for mining.
ERROR - !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR - Mining program unexpected exit.
ERROR - Code: 255, Reason: Unknown error
ERROR - Restart miner after 10 secs ...
ERROR - !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Can you advise me what this means and how to fix it?

Thank you.

[Manuelgarcia19891109]

El dom., 8 may. 2022 23:21, Tom5051 ***@***.***> escribió:

…

Memory usage should be 100% shouldn't it? Weird you're getting 66% Did you update your nvidia drivers to 510.60? Intensity settings? — Reply to this email directly, view it on GitHub <#808 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ATAGJ6BNNW27A73CJHFYK53VJAV3XANCNFSM5VLXTICA> . You are receiving this because you commented.Message ID: ***@***.***>

[O-Ogi]

feature: ethash 100% LHR unlocker added, for both Windows & Linux.

• Run nbminer with admin priviledge to get 100% LHR unlock
• Tested and verified on drivers: 512.15 for Windows, 510.60 for Linux.
• Other driver versions may have some compatibility issue.
• Previous LHR mode are removed.

---

This discussion was created from the release v41.0.

[O-Ogi]

a077e1d

[O-Ogi]

a077e1d