NBMiner v39.7 #568
Replies: 26 comments 31 replies
-
Beta Was this translation helpful? Give feedback.
-
|
test the first driver that works and return one to see if the MH/s improves.... |
Beta Was this translation helpful? Give feedback.
-
|
I get the impression that the v39.6 worked better and stable... |
Beta Was this translation helpful? Give feedback.
-
|
i have the same problem 3060 LHR V2 driver 472.12 , is there a solution? |
Beta Was this translation helpful? Give feedback.
-
|
I think the problem will be closed in the next version of the miner |
Beta Was this translation helpful? Give feedback.
-
|
After 3060ti runs for a period of time, the computing power suddenly drops from 43m to 22m |
Beta Was this translation helpful? Give feedback.
-
|
I get the impression that the v39.6 worked better and stable... GPU 3080ti |
Beta Was this translation helpful? Give feedback.
-
|
I feel the same too with my 3080ti. The other thing I don’t understand is that when I increase my GPU clock, I get significantly reduced hash rate and yet the LHR doesn’t trigger. It’s hard for me to optimize because I don’t understand how increasing mem clock could decrease hash rate without hitting the lock. I have mine set to mem clock +1250MHz. Anything above this and it drops to 60MH. |
Beta Was this translation helpful? Give feedback.
-
Yesterday i corroborate the exact same thing with my Gigabyte VISION 3080ti OC, anything above 1250+ mem clock will drop out to 70, i think that's the sweet spot. At least, for the primary device, i have 2 exactly same 3080ti and the secundary (device 1) i can push it a little further, maybe is because is not using power to boot up windows and it's processes and stuff like that, i don't know, could it be silicon lottery but i can push it to 1400mc and get around 90~91mh/s. Try that out. The thing is, i know people that can achieve 220w power consumption, and my stats are as follows: 90mhs 286w 55CTmp 84MTmp 70Fan (fixed) 1300 CClk 10451 GMClk (getting above 305~315 kH/w) |
Beta Was this translation helpful? Give feedback.
-
|
Something strange is happening. I noticed that sometimes my hash rate is super low (low 80 to high 70), but after playing a game, if I return to mining I can sometimes hit 89-90MH and even bump my lhr to 75.5. Not sure what’s triggering it but so far looking good. |
Beta Was this translation helpful? Give feedback.
-
For which version is that ? Also does any of you guys get LHR limiter to kick in after couple of hours ? |
Beta Was this translation helpful? Give feedback.
-
|
What driver is recommended on linux(hiveos) for this v39.7 mining with 3060 LHRv1 and 3090? Now I run on 495.44, but I know 460.39 is recommended for another miner. [14:30:13] INFO - |ID|Device|Hashrate|Accept|Reject|Inv|Powr|CTmp|MTmp|Fan|CClk|GMClk|MUtl|Eff/Watt| (This v39.7 NBMiner is the first to run stable on this rig.) |
Beta Was this translation helpful? Give feedback.
-
|
Is there anything i need to do to get better with my v1 3060's |
Beta Was this translation helpful? Give feedback.
-
|
I did it's working for now more than 1 hour 0 rejects... I think there were 3 or 4 issues |
Beta Was this translation helpful? Give feedback.
-
How do you get that log??? Are you using nicehash??? Cause i can get it out of nicehash but with nbminer on nicehash... I cant find it |
Beta Was this translation helpful? Give feedback.
-
Mine are runing at 1180 and cant go much further... only if you give them power... and that will not be sustainable... I will give you my temps and results for first hour as well as oc tune values... I never had the miner runing for more than 12 hours... Afterburner Card 0 tu104-a 2070super PL 46 Card 1 asus 3060 ga106 lhr a1 Card 2 gigabyte |
Beta Was this translation helpful? Give feedback.
-
|
@Kafila Does the issue still persists? Gigabyte Brand: -400, +1340, 70% (49.34MHs) 118W It has been running for 48hrs with no issues so far (no NBminer restarts) and only 2 rejects on one card. |
Beta Was this translation helpful? Give feedback.
-
|
You still running like that... I had to adjust stuf arroun and coudnt get the miner in place agai but one 2 days ready I hope i have same clocks runing now. |
Beta Was this translation helpful? Give feedback.
-
|
What hashrate will I get if I don't use the 470.05 driver for RTX 3060v1? |
Beta Was this translation helpful? Give feedback.
-
|
I have an update about my Rev 1 RTX 3060's. I had to lower all the OC settings even more. Gigabyte Brand: -400, +1340, 70% (49.34MHs) 118W It has been running for 48hrs with no issues so far (no NBminer restarts) and only 2 rejects on one card. |
Beta Was this translation helpful? Give feedback.
-
|
NBMiner_39.7_Win.zip is failing.
|
Beta Was this translation helpful? Give feedback.
-
|
Maybe ur Antivirus app, if not in Chrome open the Downloads Tab and retry the download |
Beta Was this translation helpful? Give feedback.
-
|
how to turn on -lhr-mode 2? |
Beta Was this translation helpful? Give feedback.
-
|
how to install LHR 69 ??? |
Beta Was this translation helpful? Give feedback.
-
|
Hi , single 3080Ti here locked at 1400MHz / 725mV for the core and 10500 MHz ( +1250) for the memory im getting 88mhs at 230-240W for couple of hours ( 10-12h ) then LHR limiter seems to kick in and the hashrate drop to 44mhs or something , so im forced to restart the rig . My question is , isn't v39.7 supposed to fix that issue ? |
Beta Was this translation helpful? Give feedback.
-
Which version do you recommend? I'm using 496.49... version 472.12 doesn't display consumption on nbmimer |
Beta Was this translation helpful? Give feedback.
-
|
I´m using 460.91.03 Nvidia Driver |
Beta Was this translation helpful? Give feedback.
-
|
Im using 472.12, what consumption do you mean? and yea 496.69 is DCH and a lot of peoples hash rate just drops after a few minutes, non lhr and lhr cards |
Beta Was this translation helpful? Give feedback.
-
Anything before 496.69 i think, they stopped releasing non DCH drivers now |
Beta Was this translation helpful? Give feedback.
-
I installed version 466.77 standard, non dch.... this version showed the consumption of the 3070ti and 3080ti, but the 1070 didn't show... I remember the 472.12 driver didn't show any... does anyone know how to fix this? |
Beta Was this translation helpful? Give feedback.
-
|
Yeah in this one i think... my is very nice now... had to low down my 2070s now I only get 40 mh out of it but all is stable...
I will try to get more out of her latter... or maybe now hahahah
Get Outlook for Android<https://aka.ms/AAb9ysg>
…________________________________
From: alexsandrn ***@***.***>
Sent: Wednesday, November 3, 2021 6:08:44 PM
To: NebuTech/NBMiner ***@***.***>
Cc: Kafila ***@***.***>; Mention ***@***.***>
Subject: Re: [NebuTech/NBMiner] NBMiner v39.7 (Discussion #568)
I think the problem will be closed in the next version of the miner
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub<#568 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AFVBXHNBKYABDPB5NIL3J7LUKF3CZANCNFSM5HA3YZ6Q>.
|
Beta Was this translation helpful? Give feedback.
-
|
Daggerhashimoto
Get Outlook for Android<https://aka.ms/AAb9ysg>
…________________________________
From: moonshot87 ***@***.***>
Sent: Friday, November 5, 2021 10:02:48 AM
To: NebuTech/NBMiner ***@***.***>
Cc: Kafila ***@***.***>; Mention ***@***.***>
Subject: Re: [NebuTech/NBMiner] NBMiner v39.7 (Discussion #568)
Which algo you run at?
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub<#568 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AFVBXHI77ZTD3CZETX4TWO3UKOTURANCNFSM5HA3YZ6Q>.
|
Beta Was this translation helpful? Give feedback.
-
|
how to install LHR 69 ??? |
Beta Was this translation helpful? Give feedback.
-
|
To work with that you have to use the normal driver... but it will run the card lower than with the juicy driver...
Get Outlook for Android<https://aka.ms/AAb9ysg>
…________________________________
From: papirdos ***@***.***>
Sent: Saturday, November 6, 2021 7:00:33 AM
To: NebuTech/NBMiner ***@***.***>
Cc: Kafila ***@***.***>; Mention ***@***.***>
Subject: Re: [NebuTech/NBMiner] NBMiner v39.7 (Discussion #568)
how to install LHR 69 ???
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub<#568 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AFVBXHNVZJSPGQDOVBTW4ITUKTHBDANCNFSM5HA3YZ6Q>.
|
Beta Was this translation helpful? Give feedback.
-
|
How can I use the orther arguments? "platform": 1 |
Beta Was this translation helpful? Give feedback.
-
|
каждые 10 -15 мин вылетает ошибка |
Beta Was this translation helpful? Give feedback.
-
|
In eussian all i kan say is vodka... but clocks are too high... or temperature limits too low... |
Beta Was this translation helpful? Give feedback.
-
|
Mine 3080ti pl70 cc-150, mc1350, f80 =90mh/s |
Beta Was this translation helpful? Give feedback.
-
|
Try add your lhr to the config line... I think you can and it will force it...
Get Outlook for Android<https://aka.ms/AAb9ysg>
…________________________________
From: rafamonteiroo ***@***.***>
Sent: Tuesday, November 9, 2021 11:41:59 PM
To: NebuTech/NBMiner ***@***.***>
Cc: Kafila ***@***.***>; Mention ***@***.***>
Subject: Re: [NebuTech/NBMiner] NBMiner v39.7 (Discussion #568)
Hi , single 3080Ti here locked at 1400MHz / 725mV for the core and 10500 MHz ( +1250) for the memory im getting 88mhs at 230-240W for couple of hours ( 10-12h ) then LHR limiter seems to kick in and the hashrate drop to 44mhs or something , so im forced to restart the rig .
My question is , isn't v39.7 supposed to fix that issue ?
I have this same problem with the 3080ti, nbminer does not detect that it blocked LHR
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub<#568 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AFVBXHOQW5JKMMR3TJX7FTTULGWUPANCNFSM5HA3YZ6Q>.
|
Beta Was this translation helpful? Give feedback.
-
|
powpat547@gmail.com |
Beta Was this translation helpful? Give feedback.
-
|
472.12 yes, now back to 39.6, stable operation
------------------ 原始邮件 ------------------
发件人: "NebuTech/NBMiner" ***@***.***>;
发送时间: 2021年11月11日(星期四) 凌晨3:16
***@***.***>;
抄送: "德 善 ***@***.******@***.***>;
主题: Re: [NebuTech/NBMiner] NBMiner v39.7 (Discussion #568)
Im using 472.12, what consumption do you mean? and yea 496.69 is DCH and a lot of peoples hash rate just drops after a few minutes, non lhr and lhr cards
this pwer
[img]https://i.imgur.com/oeWwsbR.png[/img]
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
Triage notifications on the go with GitHub Mobile for iOS or Android.
|
Beta Was this translation helpful? Give feedback.
-
|
472.12 yes, now back to 39.6, stable operation
------------------ 原始邮件 ------------------
发件人: "NebuTech/NBMiner" ***@***.***>;
发送时间: 2021年11月11日(星期四) 凌晨2:47
***@***.***>;
抄送: "德 善 ***@***.******@***.***>;
主题: Re: [NebuTech/NBMiner] NBMiner v39.7 (Discussion #568)
rolll back your drivers, new drivers bad for mining
Which version do you recommend? I'm using 496.49... version 472.12 doesn't display consumption on nbmimer
Anything before 496.69 i think, they stopped releasing non DCH drivers now
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
Triage notifications on the go with GitHub Mobile for iOS or Android.
|
Beta Was this translation helpful? Give feedback.
-
|
472.12 yes, now back to 39.6, stable operation
…------------------ 原始邮件 ------------------
发件人: "NebuTech/NBMiner" ***@***.***>;
发送时间: 2021年11月11日(星期四) 凌晨2:46
***@***.***>;
抄送: "德 善 ***@***.******@***.***>;
主题: Re: [NebuTech/NBMiner] NBMiner v39.7 (Discussion #568)
Im using 472.12, what consumption do you mean? and yea 496.69 is DCH and a lot of peoples hash rate just drops after a few minutes, non lhr and lhr cards
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or unsubscribe.
Triage notifications on the go with GitHub Mobile for iOS or Android.
|
Beta Was this translation helpful? Give feedback.
-
|
472.12 yes, now back to 39.6, stable operation
…------------------ 原始邮件 ------------------
发件人: ***@***.***>;
发送时间: 2021年11月11日(星期四) 凌晨2:20
收件人: ***@***.***>;
抄送: "德 善 ***@***.***>; ***@***.***>;
主题: Re: [NebuTech/NBMiner] NBMiner v39.7 (Discussion #568)
回滚你的驱动，新的驱动不适合挖矿
—
你收到这个是因为你评论了。
直接回复此邮件，在 GitHub 上查看或取消订阅.
GitHub Mobile 上的分流通知监督办或机器人.
|
Beta Was this translation helpful? Give feedback.
-
|
Hi. |
Beta Was this translation helpful? Give feedback.
-
|
quick question, does this miner use opengl? I'm able to run in using NVIDIA, but doesn't work with intel gpu. Since NVIDIA is too powerful for etchash algorithm i'm using intel UHD 620 gpu, any help greatly appreciated. |
Beta Was this translation helpful? Give feedback.
-
|
Youuu don have any intel gpu... what you got is an integrated graphics unit in the intel processor that sucks ram out... your ram... so no...
Get Outlook for Android<https://aka.ms/AAb9ysg>
…________________________________
From: pattrann ***@***.***>
Sent: Saturday, November 13, 2021 11:41:40 PM
To: NebuTech/NBMiner ***@***.***>
Cc: Kafila ***@***.***>; Mention ***@***.***>
Subject: Re: [NebuTech/NBMiner] NBMiner v39.7 (Discussion #568)
quick question, does this miner use opengl? I'm able to run in using NVIDIA, but doesn't work with intel gpu. Since NVIDIA is too powerful for etchash algorithm i'm using intel UHD 620 gpu, any help greatly appreciated.
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub<#568 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AFVBXHK7NJR6A7CBFSCODOTUL3ZTJANCNFSM5HA3YZ6Q>.
|
Beta Was this translation helpful? Give feedback.
-
|
i see the problem, is there a way to get it running on a 2gb NVIDIA mx130? |
Beta Was this translation helpful? Give feedback.
-
|
I don't think so and if you could it give a what???
Get Outlook for Android<https://aka.ms/AAb9ysg>
…________________________________
From: pattrann ***@***.***>
Sent: Sunday, November 14, 2021 12:06:33 AM
To: NebuTech/NBMiner ***@***.***>
Cc: Kafila ***@***.***>; Mention ***@***.***>
Subject: Re: [NebuTech/NBMiner] NBMiner v39.7 (Discussion #568)
i see the problem, is there a way to get it running on a 2gb NVIDIA mx130?
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub<#568 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AFVBXHNATKRT2JOYFUKK3S3UL34QTANCNFSM5HA3YZ6Q>.
|
Beta Was this translation helpful? Give feedback.
-
|
Im receiving error. What should i do please?
|
Beta Was this translation helpful? Give feedback.
-
|
That card will not be profitable... it can make 3 dollars month... |
Beta Was this translation helpful? Give feedback.
![https://i.imgur.com/oeWwsbR.png[/img]](https://i.imgur.com/oeWwsbR.png[/img]){kind=link}
-
|
your card does not have enough gpu memory to load the dag for Ethereum mining. There is nothing you can do about it. You need a card with 6GB or more. |
Beta Was this translation helpful? Give feedback.
and others
-
This discussion was created from the release NBMiner v39.7.
Beta Was this translation helpful? Give feedback.
All reactions