Error while running the first command on Docker "docker: failed to register layer" #36
Comments
|
Could you copy the full output or error log? That will help us debug where the error occurs. Thank you. |
|
This is everything : Unable to find image 'leonyichencai/synb0-disco:v3.0' locally |
|
This is an error downloading the image. It seems as if you have run out of space on your hard drive? It may be worth downloading on a disk space that you know contains plenty of space (10-12Gb). |
|
Could you please tell me how to do that? I am not that familiar with Docker. My Hard drive has 2 TB space and still 0.5 TB space left there. I don't know which part of the command to change to download it on a disk space |
|
That should be plenty of space. I would try the pulling the docker again (which is the first thing done when you do 'docker run'). It only needs to download once, then all other 'docker run' calls will be much more quick because it will not need to redownload the container. |
|
I tried again, and this time I logged in the Docker page and found "leonyichencai/synb0-disco" and pulled the docker command from there "docker pull leonyichencai/synb0-disco" After running this command , I got this error : Using default tag: latest Seems like downloading the image is not a problem this time but space is still an issue. What do I need to add to the command to define the space on my hard drive ? |
|
In order to check how much space can be reclaimed due to unused images, I ran this command: docker system df And what I got was: TYPE TOTAL ACTIVE SIZE RECLAIMABLE And because RECLAIMABLE amount was greater than zero then I ran command: docker system prune -a and it cleaned up all the unused space. Now I am running "docker pull leonyichencai/synb0-disco " again. I hope it works this time |
|
Fortunately It worked and space problem is solved. Thanks |
Hi ,
First of all I wanted to say thank you for making this amazing method that can solve lots of distortion correction problems on dataset without reverse gradient. Your work is so precious.
I tried to run your method on my data and what I did is to run the following command:
sudo docker run --rm$(id -u):$ (id -g)
-v $(pwd)/INPUTS/:/INPUTS/
-v $(pwd)/OUTPUTS:/OUTPUTS/
-v /usr/local/freesurfer:/extra/freesurfer/license.txt
--user
leonyichencai/synb0-disco:v3.0
Password:
Unable to find image 'leonyichencai/synb0-disco:v3.0' locally
v3.0: Pulling from leonyichencai/synb0-disco
As you mentioned in your instruction, as a Mac user I opened my Docker and in the setting I increased the Memory to 40 GB and CPUs to 8 , Swap is 1 GB and Disk Image size is 59.6 GB.
After running the command , I can see all of the downloading goes complete, apart from the biggest one with 12.38 GB. I can see it goes up to 10 GB and then it drops out and showing this error:
docker: failed to register layer: Error processing tar file(exit status 1): write /extra/fsl/bin/fdt_matrix_merge: no space left on device.
See 'docker run --help'.
Could you please help me how to sort out this issue?
Big thanks,
Maryam
The text was updated successfully, but these errors were encountered: