These parts are required in addition to the General BOM
| Part | Quantity | Notes |
|---|---|---|
| M3x5x4 Heatset Insert | 2 | |
| 5015 Blower Fan | 1 | 5V or 24V depending on your setup |
| M3x20 BHCS | 2 | M3x18 also works, then you don't need the printed spacer |
| M3 Washer | 2 | optional, only to make better contact with the fan |
The Fan I used was this GDSTIME 5015 24V Dual Ball Bearing Blower Fan
Print the parts according to your choice of mount. If you are using M3x20 BHCS don't forget to print 2 of the spacers.
Follow the General Assembly Instructions.
To secure the fan to the duct use the M3x20 BHCS with a washer and the printed spacer. Alternatively use M3x18 BHCS with a washer but without the spacer.