From 9988560f01bddf27f919b04675f306657a926cde Mon Sep 17 00:00:00 2001 From: Michael Richardson Date: Fri, 26 Apr 2024 15:05:53 -0400 Subject: [PATCH] correct table formatting --- draft-ietf-opsawg-pcaplinktype.md | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/draft-ietf-opsawg-pcaplinktype.md b/draft-ietf-opsawg-pcaplinktype.md index 35c3a0a..c6555b1 100644 --- a/draft-ietf-opsawg-pcaplinktype.md +++ b/draft-ietf-opsawg-pcaplinktype.md @@ -320,10 +320,8 @@ DLT values are associated with specific operation system captures, and are opera |LINKTYPE_ELEE|286|Payload of lawful intercept packets using the ELEE protocol The packet begins with the ELEE header; it does not include any transport-layer or lower-layer headers for protocols used to transport ELEE packets. |LINKTYPE_Z_WAVE_SERIAL|287|Serial frames transmitted between a host and a Z-Wave chip over an RS-232 or USB serial connection, as described in section 5 of the Z-Wave Serial API Host Application Programming Guide |LINKTYPE_USB_2_0|288|USB 2.0, 1.1, or 1.0 packet, beginning with a PID, as described by Chapter 8 Protocol Layer of the the Universal Serial Bus Specification Revision 2.0 -|LINKTYPE_ATSC_ALP|289|ATSC Link-Layer Protocol frames, as described in section 5 of the A/330 Link-Layer Protocol specification, found at -https://www.atsc.org/atsc-documents/type/3-0-standards/, beginning with a Base Header. -|LINKTYPE_ETW|290|Event Tracing for Windows messages, beginning with a -https://www.tcpdump.org/linktypes/LINKTYPE_ETW.html pseudo-header. +|LINKTYPE_ATSC_ALP|289|ATSC Link-Layer Protocol frames, as described in section 5 of the A/330 Link-Layer Protocol specification, found at https://www.atsc.org/atsc-documents/type/3-0-standards/, beginning with a Base Header. +|LINKTYPE_ETW|290|Event Tracing for Windows messages, beginning with a https://www.tcpdump.org/linktypes/LINKTYPE_ETW.html pseudo-header. |LINKTYPE_NETANALYZER_NG|291|Reserved for Hilscher Gesellschaft fuer Systemautomation mbH netANALYZER NG hardware and software. |LINKTYPE_ZBOSS_NCP|292|Serial NCP (Network Co-Processor) protocol for Zigbee stack ZBOSS by DSR. https://cloud.dsr-corporation.com/index.php/s/BAn4LtRWbJjFiAm ZBOSS NCP protocol, beginning with a www.tcpdump.org/linktypes/LINKTYPE_ZBOSS_NCP.html header. |LINKTYPE_USB_2_0_LOW_SPEED|293|Low-Speed USB 2.0, 1.1, or 1.0 packet, beginning with a PID, as described by Chapter 8 "Protocol Layer" of the https://www.usb.org/document-library/usb-20-specification the Universal Serial Bus Specification Revision 2.0. @@ -334,8 +332,8 @@ https://www.tcpdump.org/linktypes/LINKTYPE_ETW.html pseudo-header. |LINKTYPE_SILABS_DEBUG_CHANNEL|298|Silicon Labs debug channel protocol, as described in https://github.com/SiliconLabs/java_packet_trace_library/blob/master/doc/debug-channel.md |LINKTYPE_FIRA_UCI|299| https://www.tcpdump.org/linktypes/LINKTYPE_FIRA_UCI.html Ultra-wideband (UWB) controller interface protocol (UCI). |LINKTYPE_MDB|300|MDB (Multi-Drop Bus) protocol between a vending machine controller and peripherals inside the vending machine, with the message format specified by https://www.kaiser.cx/pcap-mdb.html the PCAP format for MDB specification. -|LINKTYPE_DECT_NR|301|DECT-2020 New Radio (NR) MAC layer specified in https://www.etsi.org/committee/1394-dect ETSI TS 103 636-4. -The Physical Header Field is always encoded using 80 bits (10 bytes). Broadcast transmissions using 40 bits (5 bytes) is padded with 40 zero bits (5 bytes). When padding is used the Receiver Identity value 0x0000 (reserved address) is used to detect broadcast transmissions. +|LINKTYPE_DECT_NR|301|DECT-2020 New Radio (NR) MAC layer specified in https://www.etsi.org/committee/1394-dect ETSI TS 103 636-4. The Physical Header Field is always encoded using 80 bits (10 bytes). Broadcast transmissions using 40 bits (5 bytes) is padded with 40 zero bits (5 bytes). When padding is used the Receiver Identity value 0x0000 (reserved address) is used to detect broadcast transmissions. + # Guidance for Designated Experts When processing a request for a Specification Required allocation the Designated Experts are expected to be able to find the relevant specification at a clearly stable URL.