RFID-Base

/*
 * 文 件 名：RFID.pde
 * 创 建 者：Dr.Leong   ( WWW.B2CQSHOP.COM )
 * 创建日期：2011.09.19
 * 修 改 者：
 * 修改日期：
 * 功能描述：Mifare1 寻卡→防冲突→选卡→读写 接口
 */
 // the sensor communicates using SPI, so include the library:
#include <SPI.h>

#define	uchar	unsigned char
#define	uint	unsigned int

//数组最大长度
#define MAX_LEN 16

/////////////////////////////////////////////////////////////////////
//set the pin
/////////////////////////////////////////////////////////////////////
const int chipSelectPin = 10;
const int NRSTPD = 5;

//MF522命令字
#define PCD_IDLE              0x00               //NO action;取消当前命令
#define PCD_AUTHENT           0x0E               //验证密钥
#define PCD_RECEIVE           0x08               //接收数据
#define PCD_TRANSMIT          0x04               //发送数据
#define PCD_TRANSCEIVE        0x0C               //发送并接收数据
#define PCD_RESETPHASE        0x0F               //复位
#define PCD_CALCCRC           0x03               //CRC计算

//Mifare_One卡片命令字
#define PICC_REQIDL           0x26               //寻天线区内未进入休眠状态
#define PICC_REQALL           0x52               //寻天线区内全部卡
#define PICC_ANTICOLL         0x93               //防冲撞
#define PICC_SElECTTAG        0x93               //选卡
#define PICC_AUTHENT1A        0x60               //验证A密钥
#define PICC_AUTHENT1B        0x61               //验证B密钥
#define PICC_READ             0x30               //读块
#define PICC_WRITE            0xA0               //写块
#define PICC_DECREMENT        0xC0               //扣款
#define PICC_INCREMENT        0xC1               //充值
#define PICC_RESTORE          0xC2               //调块数据到缓冲区
#define PICC_TRANSFER         0xB0               //保存缓冲区中数据
#define PICC_HALT             0x50               //休眠


//和MF522通讯时返回的错误代码
#define MI_OK                 0
#define MI_NOTAGERR           1
#define MI_ERR                2


//------------------MFRC522寄存器---------------
//Page 0:Command and Status
#define     Reserved00            0x00    
#define     CommandReg            0x01    
#define     CommIEnReg            0x02    
#define     DivlEnReg             0x03    
#define     CommIrqReg            0x04    
#define     DivIrqReg             0x05
#define     ErrorReg              0x06    
#define     Status1Reg            0x07    
#define     Status2Reg            0x08    
#define     FIFODataReg           0x09
#define     FIFOLevelReg          0x0A
#define     WaterLevelReg         0x0B
#define     ControlReg            0x0C
#define     BitFramingReg         0x0D
#define     CollReg               0x0E
#define     Reserved01            0x0F
//Page 1:Command     
#define     Reserved10            0x10
#define     ModeReg               0x11
#define     TxModeReg             0x12
#define     RxModeReg             0x13
#define     TxControlReg          0x14
#define     TxAutoReg             0x15
#define     TxSelReg              0x16
#define     RxSelReg              0x17
#define     RxThresholdReg        0x18
#define     DemodReg              0x19
#define     Reserved11            0x1A
#define     Reserved12            0x1B
#define     MifareReg             0x1C
#define     Reserved13            0x1D
#define     Reserved14            0x1E
#define     SerialSpeedReg        0x1F
//Page 2:CFG    
#define     Reserved20            0x20  
#define     CRCResultRegM         0x21
#define     CRCResultRegL         0x22
#define     Reserved21            0x23
#define     ModWidthReg           0x24
#define     Reserved22            0x25
#define     RFCfgReg              0x26
#define     GsNReg                0x27
#define     CWGsPReg	          0x28
#define     ModGsPReg             0x29
#define     TModeReg              0x2A
#define     TPrescalerReg         0x2B
#define     TReloadRegH           0x2C
#define     TReloadRegL           0x2D
#define     TCounterValueRegH     0x2E
#define     TCounterValueRegL     0x2F
//Page 3:TestRegister     
#define     Reserved30            0x30
#define     TestSel1Reg           0x31
#define     TestSel2Reg           0x32
#define     TestPinEnReg          0x33
#define     TestPinValueReg       0x34
#define     TestBusReg            0x35
#define     AutoTestReg           0x36
#define     VersionReg            0x37
#define     AnalogTestReg         0x38
#define     TestDAC1Reg           0x39  
#define     TestDAC2Reg           0x3A   
#define     TestADCReg            0x3B   
#define     Reserved31            0x3C   
#define     Reserved32            0x3D   
#define     Reserved33            0x3E   
#define     Reserved34			  0x3F
//-----------------------------------------------

//4字节卡序列号，第5字节为校验字节
uchar serNum[5];

uchar  writeData[16]={0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 100};  //初始化 100元钱
uchar  moneyConsume = 18 ;  //消费18元
uchar  moneyAdd = 10 ;  //充值10元
//扇区A密码，16个扇区，每个扇区密码6Byte
 uchar sectorKeyA[16][16] = {{0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF},
                             {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF},
                             //{0x19, 0x84, 0x07, 0x15, 0x76, 0x14},
                             {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF},
                            };
 uchar sectorNewKeyA[16][16] = {{0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF},
                                {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xff,0x07,0x80,0x69, 0x19,0x84,0x07,0x15,0x76,0x14},
                                 //you can set another ket , such as  " 0x19, 0x84, 0x07, 0x15, 0x76, 0x14 "
                                 //{0x19, 0x84, 0x07, 0x15, 0x76, 0x14, 0xff,0x07,0x80,0x69, 0x19,0x84,0x07,0x15,0x76,0x14},
                                 // but when loop, please set the  sectorKeyA, the same key, so that RFID module can read the card
                                {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xff,0x07,0x80,0x69, 0x19,0x33,0x07,0x15,0x34,0x14},
                               };

void setup() {                
   Serial.begin(9600);                       // RFID reader SOUT pin connected to Serial RX pin at 2400bps 
 // start the SPI library:
  SPI.begin();
  
  pinMode(chipSelectPin,OUTPUT);             // Set digital pin 10 as OUTPUT to connect it to the RFID /ENABLE pin 
    digitalWrite(chipSelectPin, LOW);          // Activate the RFID reader
  pinMode(NRSTPD,OUTPUT);               // Set digital pin 10 , Not Reset and Power-down
    digitalWrite(NRSTPD, HIGH);

  MFRC522_Init();  
}

void loop()
{
  	uchar i,tmp;
	uchar status;
        uchar str[MAX_LEN];
        uchar RC_size;
        uchar blockAddr;	//选择操作的块地址0～63
        String mynum = "";


		//寻卡，返回卡类型	
		status = MFRC522_Request(PICC_REQIDL, str);	
		if (status == MI_OK)
		{
                        //Serial.println("Card detected");
			//Serial.print(str[0],BIN);
                        //Serial.print(" , ");
			//Serial.print(str[1],BIN);
                        //Serial.println(" ");
		}

		//防冲撞，返回卡的序列号 4字节
		status = MFRC522_Anticoll(str);
		memcpy(serNum, str, 5);
		if (status == MI_OK)
		{

                        //Serial.println("The card's number is  : ");
			//Serial.print(serNum[0]);
                        //Serial.print(" , ");
			//Serial.print(serNum[1],BIN);
                        //Serial.print(" , ");
			//Serial.print(serNum[2],BIN);
                        //Serial.print(" , ");
			//Serial.print(serNum[3],BIN);
                        //Serial.print(" , ");
			//Serial.print(serNum[4],BIN);
                        //Serial.println(" ");
                        
                        // Should really check all pairs, but for now we'll just use the first
                     
                        if(serNum[0] == 88) {
                          Serial.println("Hello Grant");
                        } else if(serNum[0] == 173) {
                          Serial.println("Hello David");
                        }
                        delay(1000);
		}
                //Serial.println(" ");
		MFRC522_Halt();			//命令卡片进入休眠状态              
          
}

/*
 * 函 数 名：Write_MFRC5200
 * 功能描述：向MFRC522的某一寄存器写一个字节数据
 * 输入参数：addr--寄存器地址；val--要写入的值
 * 返 回 值：无
 */
void Write_MFRC522(uchar addr, uchar val)
{
	digitalWrite(chipSelectPin, LOW);

	//地址格式：0XXXXXX0
	SPI.transfer((addr<<1)&0x7E);	
	SPI.transfer(val);
	
	digitalWrite(chipSelectPin, HIGH);
}


/*
 * 函 数 名：Read_MFRC522
 * 功能描述：从MFRC522的某一寄存器读一个字节数据
 * 输入参数：addr--寄存器地址
 * 返 回 值：返回读取到的一个字节数据
 */
uchar Read_MFRC522(uchar addr)
{
	uchar val;

	digitalWrite(chipSelectPin, LOW);

	//地址格式：1XXXXXX0
	SPI.transfer(((addr<<1)&0x7E) | 0x80);	
	val =SPI.transfer(0x00);
	
	digitalWrite(chipSelectPin, HIGH);
	
	return val;	
}

/*
 * 函 数 名：SetBitMask
 * 功能描述：置RC522寄存器位
 * 输入参数：reg--寄存器地址;mask--置位值
 * 返 回 值：无
 */
void SetBitMask(uchar reg, uchar mask)  
{
    uchar tmp;
    tmp = Read_MFRC522(reg);
    Write_MFRC522(reg, tmp | mask);  // set bit mask
}


/*
 * 函 数 名：ClearBitMask
 * 功能描述：清RC522寄存器位
 * 输入参数：reg--寄存器地址;mask--清位值
 * 返 回 值：无
 */
void ClearBitMask(uchar reg, uchar mask)  
{
    uchar tmp;
    tmp = Read_MFRC522(reg);
    Write_MFRC522(reg, tmp & (~mask));  // clear bit mask
} 


/*
 * 函 数 名：AntennaOn
 * 功能描述：开启天线,每次启动或关闭天险发射之间应至少有1ms的间隔
 * 输入参数：无
 * 返 回 值：无
 */
void AntennaOn(void)
{
	uchar temp;

	temp = Read_MFRC522(TxControlReg);
	if (!(temp & 0x03))
	{
		SetBitMask(TxControlReg, 0x03);
	}
}


/*
 * 函 数 名：AntennaOff
 * 功能描述：关闭天线,每次启动或关闭天险发射之间应至少有1ms的间隔
 * 输入参数：无
 * 返 回 值：无
 */
void AntennaOff(void)
{
	ClearBitMask(TxControlReg, 0x03);
}


/*
 * 函 数 名：ResetMFRC522
 * 功能描述：复位RC522
 * 输入参数：无
 * 返 回 值：无
 */
void MFRC522_Reset(void)
{
    Write_MFRC522(CommandReg, PCD_RESETPHASE);
}


/*
 * 函 数 名：InitMFRC522
 * 功能描述：初始化RC522
 * 输入参数：无
 * 返 回 值：无
 */
void MFRC522_Init(void)
{
	digitalWrite(NRSTPD,HIGH);

	MFRC522_Reset();
	 	
	//Timer: TPrescaler*TreloadVal/6.78MHz = 24ms
    Write_MFRC522(TModeReg, 0x8D);		//Tauto=1; f(Timer) = 6.78MHz/TPreScaler
    Write_MFRC522(TPrescalerReg, 0x3E);	//TModeReg[3..0] + TPrescalerReg
    Write_MFRC522(TReloadRegL, 30);           
    Write_MFRC522(TReloadRegH, 0);
	
	Write_MFRC522(TxAutoReg, 0x40);		//100%ASK
	Write_MFRC522(ModeReg, 0x3D);		//CRC初始值0x6363	???

	//ClearBitMask(Status2Reg, 0x08);		//MFCrypto1On=0
	//Write_MFRC522(RxSelReg, 0x86);		//RxWait = RxSelReg[5..0]
	//Write_MFRC522(RFCfgReg, 0x7F);   		//RxGain = 48dB

	AntennaOn();		//打开天线
}


/*
 * 函 数 名：MFRC522_Request
 * 功能描述：寻卡，读取卡类型号
 * 输入参数：reqMode--寻卡方式，
 *			 TagType--返回卡片类型
 *			 	0x4400 = Mifare_UltraLight
 *				0x0400 = Mifare_One(S50)
 *				0x0200 = Mifare_One(S70)
 *				0x0800 = Mifare_Pro(X)
 *				0x4403 = Mifare_DESFire
 * 返 回 值：成功返回MI_OK
 */
uchar MFRC522_Request(uchar reqMode, uchar *TagType)
{
	uchar status;  
	uint backBits;			//接收到的数据位数

	Write_MFRC522(BitFramingReg, 0x07);		//TxLastBists = BitFramingReg[2..0]	???
	
	TagType[0] = reqMode;
	status = MFRC522_ToCard(PCD_TRANSCEIVE, TagType, 1, TagType, &backBits);

	if ((status != MI_OK) || (backBits != 0x10))
	{    
		status = MI_ERR;
	}
   
	return status;
}


/*
 * 函 数 名：MFRC522_ToCard
 * 功能描述：RC522和ISO14443卡通讯
 * 输入参数：command--MF522命令字，
 *			 sendData--通过RC522发送到卡片的数据, 
 *			 sendLen--发送的数据长度		 
 *			 backData--接收到的卡片返回数据，
 *			 backLen--返回数据的位长度
 * 返 回 值：成功返回MI_OK
 */
uchar MFRC522_ToCard(uchar command, uchar *sendData, uchar sendLen, uchar *backData, uint *backLen)
{
    uchar status = MI_ERR;
    uchar irqEn = 0x00;
    uchar waitIRq = 0x00;
    uchar lastBits;
    uchar n;
    uint i;

    switch (command)
    {
        case PCD_AUTHENT:		//认证卡密
		{
			irqEn = 0x12;
			waitIRq = 0x10;
			break;
		}
		case PCD_TRANSCEIVE:	//发送FIFO中数据
		{
			irqEn = 0x77;
			waitIRq = 0x30;
			break;
		}
		default:
			break;
    }
   
    Write_MFRC522(CommIEnReg, irqEn|0x80);	//允许中断请求
    ClearBitMask(CommIrqReg, 0x80);			//清除所有中断请求位
    SetBitMask(FIFOLevelReg, 0x80);			//FlushBuffer=1, FIFO初始化
    
	Write_MFRC522(CommandReg, PCD_IDLE);	//NO action;取消当前命令	???

	//向FIFO中写入数据
    for (i=0; i<sendLen; i++)
    {   
		Write_MFRC522(FIFODataReg, sendData[i]);    
	}

	//执行命令
	Write_MFRC522(CommandReg, command);
    if (command == PCD_TRANSCEIVE)
    {    
		SetBitMask(BitFramingReg, 0x80);		//StartSend=1,transmission of data starts  
	}   
    
	//等待接收数据完成
	i = 2000;	//i根据时钟频率调整，操作M1卡最大等待时间25ms	???
    do 
    {
		//CommIrqReg[7..0]
		//Set1 TxIRq RxIRq IdleIRq HiAlerIRq LoAlertIRq ErrIRq TimerIRq
        n = Read_MFRC522(CommIrqReg);
        i--;
    }
    while ((i!=0) && !(n&0x01) && !(n&waitIRq));

    ClearBitMask(BitFramingReg, 0x80);			//StartSend=0
	
    if (i != 0)
    {    
        if(!(Read_MFRC522(ErrorReg) & 0x1B))	//BufferOvfl Collerr CRCErr ProtecolErr
        {
            status = MI_OK;
            if (n & irqEn & 0x01)
            {   
				status = MI_NOTAGERR;			//??   
			}

            if (command == PCD_TRANSCEIVE)
            {
               	n = Read_MFRC522(FIFOLevelReg);
              	lastBits = Read_MFRC522(ControlReg) & 0x07;
                if (lastBits)
                {   
					*backLen = (n-1)*8 + lastBits;   
				}
                else
                {   
					*backLen = n*8;   
				}

                if (n == 0)
                {   
					n = 1;    
				}
                if (n > MAX_LEN)
                {   
					n = MAX_LEN;   
				}
				
				//读取FIFO中接收到的数据
                for (i=0; i<n; i++)
                {   
					backData[i] = Read_MFRC522(FIFODataReg);    
				}
            }
        }
        else
        {   
			status = MI_ERR;  
		}
        
    }
	
    //SetBitMask(ControlReg,0x80);           //timer stops
    //Write_MFRC522(CommandReg, PCD_IDLE); 

    return status;
}


/*
 * 函 数 名：MFRC522_Anticoll
 * 功能描述：防冲突检测，读取选中卡片的卡序列号
 * 输入参数：serNum--返回4字节卡序列号,第5字节为校验字节
 * 返 回 值：成功返回MI_OK
 */
uchar MFRC522_Anticoll(uchar *serNum)
{
    uchar status;
    uchar i;
	uchar serNumCheck=0;
    uint unLen;
    

    //ClearBitMask(Status2Reg, 0x08);		//TempSensclear
    //ClearBitMask(CollReg,0x80);			//ValuesAfterColl
	Write_MFRC522(BitFramingReg, 0x00);		//TxLastBists = BitFramingReg[2..0]
 
    serNum[0] = PICC_ANTICOLL;
    serNum[1] = 0x20;
    status = MFRC522_ToCard(PCD_TRANSCEIVE, serNum, 2, serNum, &unLen);

    if (status == MI_OK)
	{
		//校验卡序列号
		for (i=0; i<4; i++)
		{   
		 	serNumCheck ^= serNum[i];
		}
		if (serNumCheck != serNum[i])
		{   
			status = MI_ERR;    
		}
    }

    //SetBitMask(CollReg, 0x80);		//ValuesAfterColl=1

    return status;
} 


/*
 * 函 数 名：CalulateCRC
 * 功能描述：用MF522计算CRC
 * 输入参数：pIndata--要读数CRC的数据，len--数据长度，pOutData--计算的CRC结果
 * 返 回 值：无
 */
void CalulateCRC(uchar *pIndata, uchar len, uchar *pOutData)
{
    uchar i, n;

    ClearBitMask(DivIrqReg, 0x04);			//CRCIrq = 0
    SetBitMask(FIFOLevelReg, 0x80);			//清FIFO指针
    //Write_MFRC522(CommandReg, PCD_IDLE);

	//向FIFO中写入数据	
    for (i=0; i<len; i++)
    {   
		Write_MFRC522(FIFODataReg, *(pIndata+i));   
	}
    Write_MFRC522(CommandReg, PCD_CALCCRC);

	//等待CRC计算完成
    i = 0xFF;
    do 
    {
        n = Read_MFRC522(DivIrqReg);
        i--;
    }
    while ((i!=0) && !(n&0x04));			//CRCIrq = 1

	//读取CRC计算结果
    pOutData[0] = Read_MFRC522(CRCResultRegL);
    pOutData[1] = Read_MFRC522(CRCResultRegM);
}


/*
 * 函 数 名：MFRC522_SelectTag
 * 功能描述：选卡，读取卡存储器容量
 * 输入参数：serNum--传入卡序列号
 * 返 回 值：成功返回卡容量
 */
uchar MFRC522_SelectTag(uchar *serNum)
{
    uchar i;
	uchar status;
	uchar size;
    uint recvBits;
    uchar buffer[9]; 

	//ClearBitMask(Status2Reg, 0x08);			//MFCrypto1On=0

    buffer[0] = PICC_SElECTTAG;
    buffer[1] = 0x70;
    for (i=0; i<5; i++)
    {
    	buffer[i+2] = *(serNum+i);
    }
	CalulateCRC(buffer, 7, &buffer[7]);		//??
    status = MFRC522_ToCard(PCD_TRANSCEIVE, buffer, 9, buffer, &recvBits);
    
    if ((status == MI_OK) && (recvBits == 0x18))
    {   
		size = buffer[0]; 
	}
    else
    {   
		size = 0;    
	}

    return size;
}


/*
 * 函 数 名：MFRC522_Auth
 * 功能描述：验证卡片密码
 * 输入参数：authMode--密码验证模式
                 0x60 = 验证A密钥
                 0x61 = 验证B密钥 
             BlockAddr--块地址
             Sectorkey--扇区密码
             serNum--卡片序列号，4字节
 * 返 回 值：成功返回MI_OK
 */
uchar MFRC522_Auth(uchar authMode, uchar BlockAddr, uchar *Sectorkey, uchar *serNum)
{
    uchar status;
    uint recvBits;
    uchar i;
	uchar buff[12]; 

	//验证指令+块地址＋扇区密码＋卡序列号
    buff[0] = authMode;
    buff[1] = BlockAddr;
    for (i=0; i<6; i++)
    {    
		buff[i+2] = *(Sectorkey+i);   
	}
    for (i=0; i<4; i++)
    {    
		buff[i+8] = *(serNum+i);   
	}
    status = MFRC522_ToCard(PCD_AUTHENT, buff, 12, buff, &recvBits);

    if ((status != MI_OK) || (!(Read_MFRC522(Status2Reg) & 0x08)))
    {   
		status = MI_ERR;   
	}
    
    return status;
}


/*
 * 函 数 名：MFRC522_Read
 * 功能描述：读块数据
 * 输入参数：blockAddr--块地址;recvData--读出的块数据
 * 返 回 值：成功返回MI_OK
 */
uchar MFRC522_Read(uchar blockAddr, uchar *recvData)
{
    uchar status;
    uint unLen;

    recvData[0] = PICC_READ;
    recvData[1] = blockAddr;
    CalulateCRC(recvData,2, &recvData[2]);
    status = MFRC522_ToCard(PCD_TRANSCEIVE, recvData, 4, recvData, &unLen);

    if ((status != MI_OK) || (unLen != 0x90))
    {
        status = MI_ERR;
    }
    
    return status;
}


/*
 * 函 数 名：MFRC522_Write
 * 功能描述：写块数据
 * 输入参数：blockAddr--块地址;writeData--向块写16字节数据
 * 返 回 值：成功返回MI_OK
 */
uchar MFRC522_Write(uchar blockAddr, uchar *writeData)
{
    uchar status;
    uint recvBits;
    uchar i;
	uchar buff[18]; 
    
    buff[0] = PICC_WRITE;
    buff[1] = blockAddr;
    CalulateCRC(buff, 2, &buff[2]);
    status = MFRC522_ToCard(PCD_TRANSCEIVE, buff, 4, buff, &recvBits);

    if ((status != MI_OK) || (recvBits != 4) || ((buff[0] & 0x0F) != 0x0A))
    {   
		status = MI_ERR;   
	}
        
    if (status == MI_OK)
    {
        for (i=0; i<16; i++)		//向FIFO写16Byte数据
        {    
        	buff[i] = *(writeData+i);   
        }
        CalulateCRC(buff, 16, &buff[16]);
        status = MFRC522_ToCard(PCD_TRANSCEIVE, buff, 18, buff, &recvBits);
        
		if ((status != MI_OK) || (recvBits != 4) || ((buff[0] & 0x0F) != 0x0A))
        {   
			status = MI_ERR;   
		}
    }
    
    return status;
}


/*
 * 函 数 名：MFRC522_Halt
 * 功能描述：命令卡片进入休眠状态
 * 输入参数：无
 * 返 回 值：无
 */
void MFRC522_Halt(void)
{
	uchar status;
    uint unLen;
    uchar buff[4]; 

    buff[0] = PICC_HALT;
    buff[1] = 0;
    CalulateCRC(buff, 2, &buff[2]);
 
    status = MFRC522_ToCard(PCD_TRANSCEIVE, buff, 4, buff,&unLen);
}