vendor_prop.mk

# ART
PRODUCT_PROPERTY_OVERRIDES += \
    dalvik.vm.dex2oat-filter=speed \
    dalvik.vm.image-dex2oat-filter=speed \
    ro.vendor.qti.am.reschedule_service=true \
    ro.sys.fw.dex2oat_thread_count=8 \
    dalvik.vm.boot-dex2oat-threads=8 \
    dalvik.vm.dex2oat-threads=8

# Audio
PRODUCT_PROPERTY_OVERRIDES += \
    af.fast_track_multiplier=1 \
    audio.deep_buffer.media=true \
    audio.offload.min.duration.secs=30 \
    audio.offload.video=true \
    persist.vendor.audio.fluence.speaker=false \
    persist.vendor.audio.fluence.voicecall=true \
    persist.vendor.audio.fluence.voicerec=true \
    persist.vendor.audio.hw.binder.size_kbyte=1024 \
    persist.vendor.audio.hifi.int_codec=true \
    persist.vendor.audio.ras.enabled=false \
    ro.af.client_heap_size_kbyte=7168 \
    ro.config.media_vol_default=9 \
    ro.config.media_vol_steps=25 \
    ro.config.vc_call_vol_steps=7 \
    ro.vendor.audio.sdk.fluencetype=fluence  \
    ro.vendor.audio.sdk.ssr=false \
    vendor.audio.adm.buffering.ms=3 \
    vendor.audio.dolby.ds2.enabled=false \
    vendor.audio.dolby.ds2.hardbypass=false \
    vendor.audio.flac.sw.decoder.24bit=true \
    vendor.audio.hw.aac.encoder=true \
    vendor.audio.noisy.broadcast.delay=600 \
    vendor.audio.offload.buffer.size.kb=64 \
    vendor.audio.offload.gapless.enabled=true \
    vendor.audio.offload.multiaac.enable=true \
    vendor.audio.offload.multiple.enabled=false \
    vendor.audio.offload.passthrough=false \
    vendor.audio.offload.pstimeout.secs=3 \
    vendor.audio.offload.track.enable=true \
    vendor.audio.parser.ip.buffer.size=262144 \
    vendor.audio.safx.pbe.enabled=true \
    vendor.audio.tunnel.encode=false \
    vendor.audio.use.sw.alac.decoder=true \
    vendor.audio.use.sw.ape.decoder=true \
    vendor.audio_hal.period_size=192 \
    vendor.audio_hal.in_period_size=144 \
    vendor.audio_hal.period_multiplier=3 \
    vendor.voice.path.for.pcm.voip=false

# Bluetooth
PRODUCT_PROPERTY_OVERRIDES += \
    bt.max.hfpclient.connections=1 \
    persist.bt.a2dp.aac_disable=true \
    persist.bt.enable.multicast=0 \
    persist.bt.hfp.playbackforvr=false \
    persist.bt.hfp.playbackforvoip=false \
    persist.vendor.bt.a2dp_offload_cap=sbc-aptx-aptxhd-aac \
    persist.vendor.btstack.enable.splita2dp=true \
    ro.bluetooth.emb_wp_mode=true \
    ro.bluetooth.wipower=true \
    vendor.bluetooth.soc=cherokee \
    vendor.qcom.bluetooth.soc=cherokee

# Camera
PRODUCT_PROPERTY_OVERRIDES += \
    persist.ts.rtmakeup=1 \
    persist.vendor.camera.HAL3.enabled=1 \
    persist.vendor.camera.expose.aux=1 \
    persist.vendor.camera.preview.ubwc=0 \
    vendor.camera.aux.packagelist=org.codeaurora.snapcam,org.lineageos.snap \
    vendor.camera.hal1.packagelist=com.whatsapp,com.instagram.android

# Charging maximum voltage
PRODUCT_PROPERTY_OVERRIDES += \
    persist.chg.max_volt_mv=9000

# CNE
PRODUCT_PROPERTY_OVERRIDES += \
    persist.vendor.cne.feature=1

# Dalvik overrides
PRODUCT_PROPERTY_OVERRIDES += \
    dalvik.vm.heapgrowthlimit=256m \
    dalvik.vm.heapstartsize=8m \
    dalvik.vm.heapsize=512m \
    dalvik.vm.heaptargetutilization=0.75 \
    dalvik.vm.heapminfree=512k \
    dalvik.vm.heapmaxfree=8m

# DRM
PRODUCT_PROPERTY_OVERRIDES += \
    drm.service.enabled=true

# Enable stm-events
PRODUCT_PROPERTY_OVERRIDES += \
    persist.debug.coresight.config=stm-events

# FM
PRODUCT_PROPERTY_OVERRIDES += \
    vendor.fm.a2dp.conc.disabled=false

# FRP
PRODUCT_PROPERTY_OVERRIDES += \
    ro.frp.pst=/dev/block/bootdevice/by-name/frp

# FUSE
PRODUCT_PROPERTY_OVERRIDES += \
    persist.fuse_sdcard=true

# Graphics
PRODUCT_PROPERTY_OVERRIDES += \
    debug.sf.enable_hwc_vds=1 \
    debug.sf.hw=1 \
    debug.cpurend.vsync=false \
    debug.hwui.use_buffer_age=false \
    dev.pm.dyn_samplingrate=1 \
    persist.demo.hdmirotationlock=false \
    ro.opengles.version=196610 \
    ro.sf.lcd_density=420 \
    vendor.display.disable_inline_rotator=1 \
    vendor.display.disable_partial_split=1 \
    vendor.display.disable_rotator_downscale=1 \
    vendor.display.disable_skip_validate=1 \
    vendor.display.enable_default_color_mode=1 \
    vendor.display.perf_hint_window=50 \
    vendor.gralloc.disable_ubwc=0 \
    vendor.gralloc.enable_fb_ubwc=1

# Early phase offset configuration for SurfaceFlinger
PRODUCT_PROPERTY_OVERRIDES += \
    debug.sf.early_phase_offset_ns=1500000 \
    debug.sf.early_app_phase_offset_ns=1500000 \
    debug.sf.early_gl_phase_offset_ns=3000000 \
    debug.sf.early_gl_app_phase_offset_ns=15000000

# LED
PRODUCT_PROPERTY_OVERRIDES += \
    persist.asus.led.on=1

# Location
PRODUCT_PROPERTY_OVERRIDES += \
    ro.location.osnlp.package=com.google.android.gms \
    ro.location.osnlp.region.package=""

# Media
PRODUCT_PROPERTY_OVERRIDES += \
    media.aac_51_output_enabled=true \
    media.stagefright.enable-player=true \
    media.stagefright.enable-http=true \
    media.stagefright.enable-aac=true \
    media.stagefright.enable-qcp=true \
    media.stagefright.enable-scan=true \
    mm.enable.smoothstreaming=true \
    mmp.enable.3g2=true \
    persist.mm.enable.prefetch=true \
    vendor.vidc.enc.disable_bframes=1 \
    vendor.vidc.dec.enable.downscalar=0 \
    vendor.vidc.enc.disable.pq=false \
    vidc.enc.dcvs.extra-buff-count=2 \
    vidc.enc.target_support_bframe=1

# Memory optimizations
PRODUCT_PROPERTY_OVERRIDES += \
    ro.vendor.qti.sys.fw.bservice_enable=true \
    ro.vendor.qti.am.reschedule_service=true

# Misc
PRODUCT_PROPERTY_OVERRIDES += \
    keyguard.no_require_sim=true \
    persist.vendor.qcomsysd.enabled=1 \
    ro.additionalbutton.operation=0 \
    ro.sys.fw.use_trim_settings=true \
    sys.autosuspend.timeout=500000

# Netflix
PRODUCT_PROPERTY_OVERRIDES += \
    ro.netflix.bsp_rev=Q660-13149-1

# Netmgr
PRODUCT_PROPERTY_OVERRIDES += \
    ro.vendor.use_data_netmgrd=true \
    persist.vendor.data.mode=concurrent

# NFC
PRODUCT_PROPERTY_OVERRIDES += \
    ro.hardware.nfc_nci=pn8x \
    ro.nfc.port=I2C

# NTP Server
PRODUCT_PROPERTY_OVERRIDES += \
    persist.backup.ntpServer="0.pool.ntp.org" \
    persist.vendor.overlay.izat.optin=rro

# QCOM cabl
PRODUCT_PROPERTY_OVERRIDES += \
    ro.qualcomm.cabl=0 \
    ro.vendor.display.cabl=0

# QTI
PRODUCT_PROPERTY_OVERRIDES += \
    ro.vendor.at_library=libqti-at.so \
    ro.vendor.extension_library=libqti-perfd-client.so \
    ro.vendor.qti.core_ctl_min_cpu=2 \
    ro.vendor.qti.core_ctl_max_cpu=4 \
    ro.vendor.qti.sys.fw.bg_apps_limit=60

# Power save functionality for modem
PRODUCT_PROPERTY_OVERRIDES += \
    persist.vendor.radio.add_power_save=1 \
    persist.vendor.radio.apm_sim_not_pwdn=1

# Radio
PRODUCT_PROPERTY_OVERRIDES += \
    DEVICE_PROVISIONED=1 \
    persist.data.iwlan.enable=true \
    persist.radio.multisim.config=dsds \
    persist.radio.VT_CAM_INTERFACE=1 \
    persist.radio.VT_CAM_INTERFACE=2 \
    persist.vendor.radio.atfwd.start=true \
    persist.vendor.radio.sib16_support=1 \
    persist.vendor.radio.custom_ecc=1 \
    persist.vendor.radio.rat_on=combine \
    persist.vendor.qti.telephony.vt_cam_interface=1 \
    ril.subscription.types=NV,RUIM \
    rild.libpath=/vendor/lib64/libril-qc-qmi-1.so \
    ro.carrier=unknown \
    ro.com.android.dataroaming=false \
    ro.config.vc_call_vol_steps=11 \
    ro.ril.ecclist=112,911 \
    ro.telephony.default_network=20,20 \
    telephony.lteOnCdmaDevice=1

# Radio Debug Options
PRODUCT_PROPERTY_OVERRIDES += \
   persist.dbg.ims_volte_enable=1 \
   persist.dbg.volte_avail_ovr=1 \
   persist.dbg.vt_avail_ovr=1 \
   persist.dbg.wfc_avail_ovr=1

# Radio Options
PRODUCT_PROPERTY_OVERRIDES += \
   persist.vendor.radio.rat_on=combine \
   persist.vendor.radio.data_ltd_sys_ind=1 \
   persist.vendor.radio.data_con_rprt=1 \
   persist.radio.calls.on.ims=1

# RmNet Data
PRODUCT_PROPERTY_OVERRIDES += \
    persist.data.df.dev_name=rmnet_usb0

# Sensor
PRODUCT_PROPERTY_OVERRIDES += \
    ro.vendor.qti.sdk.sensors.gestures=false \
    ro.vendor.qti.sensors.dev_ori=true \
    ro.vendor.qti.sensors.pmd=true \
    ro.vendor.qti.sensors.sta_detect=true \
    ro.vendor.qti.sensors.mot_detect=true \
    ro.vendor.qti.sensors.facing=false \
    ro.vendor.qti.sensors.cmc=false

# Shutdown
PRODUCT_PROPERTY_OVERRIDES += \
    sys.vendor.shutdown.waittime=500

# System prop for UBWC
PRODUCT_PROPERTY_OVERRIDES += \
    vendor.video.disable.ubwc=1

# Time
PRODUCT_PROPERTY_OVERRIDES += \
    persist.timed.enable=true

# USB
PRODUCT_PROPERTY_OVERRIDES += \
    ro.usb.firstboot.config=diag,serial_cdev,rmnet,adb

# WFD display
PRODUCT_PROPERTY_OVERRIDES += \
    persist.debug.wfd.enable=1 \
    persist.hwc.enable_vds=1 \
    persist.sys.wfd.virtual=0

# ZRAM disk
PRODUCT_PROPERTY_OVERRIDES += \
    ro.vendor.qti.config.zram=true