sniper

#!/bin/bash
# + -- --=[Sn1per Community Edition by @xer0dayz
# + -- --=[https://xerosecurity.com
# 

if [[ $EUID -ne 0 ]]; then
   echo "This script must be run as root"
   exit 1
fi

VER="8.5"
INSTALL_DIR="/usr/share/sniper"
LOOT_DIR="$INSTALL_DIR/loot/$TARGET"
SNIPER_PRO=$INSTALL_DIR/pro.sh

# INIT POSTGRESQL
service postgresql start 2> /dev/null

# LOAD SNIPER CONFIGURATION FILE
if [[ -f ~/.sniper.conf ]]; then
  source ~/.sniper.conf
  echo -e "$OKBLUE[*]$RESET Loaded configuration file from ~/.sniper.conf $OKBLUE[$RESET${OKGREEN}OK${RESET}$OKBLUE]$RESET"
else
  cp $INSTALL_DIR/sniper.conf ~/.sniper.conf 2> /dev/null
  source ~/.sniper.conf
  echo -e "$OKBLUE[*]$RESET Loaded configuration file from ~/.sniper.conf $OKBLUE[$RESET${OKGREEN}OK${RESET}$OKBLUE]$RESET"
fi

DISTRO=$(cat /etc/*-release | grep DISTRIB_ID= | cut -d'=' -f2)

function help {
  logo
  echo ""
  echo -e "$OKBLUE[*]$RESET NORMAL MODE"
  echo ' sniper -t <TARGET>'
  echo ""
  echo -e "$OKBLUE[*]$RESET SPECIFY CUSTOM CONFIG FILE"
  echo ' sniper -c /full/path/to/sniper.conf -t <TARGET> -m <MODE> -w <WORKSPACE>'
  echo ""
  echo -e "$OKBLUE[*]$RESET NORMAL MODE + OSINT + RECON"
  echo ' sniper -t <TARGET> -o -re'
  echo ""
  echo -e "$OKBLUE[*]$RESET STEALTH MODE + OSINT + RECON"
  echo ' sniper -t <TARGET> -m stealth -o -re'
  echo ""
  echo -e "$OKBLUE[*]$RESET DISCOVER MODE"
  echo ' sniper -t <CIDR> -m discover -w <WORSPACE_ALIAS>'
  echo ""
  echo -e "$OKBLUE[*]$RESET SCAN ONLY SPECIFIC PORT"
  echo ' sniper -t <TARGET> -m port -p <portnum>'
  echo ""
  echo -e "$OKBLUE[*]$RESET FULLPORTONLY SCAN MODE"
  echo ' sniper -t <TARGET> -fp'
  echo ""
  echo -e "$OKBLUE[*]$RESET WEB MODE - PORT 80 + 443 ONLY!"
  echo ' sniper -t <TARGET> -m web'
  echo ""
  echo -e "$OKBLUE[*]$RESET HTTP WEB PORT MODE"
  echo ' sniper -t <TARGET> -m webporthttp -p <port>'
  echo ""
  echo -e "$OKBLUE[*]$RESET HTTPS WEB PORT MODE"
  echo ' sniper -t <TARGET> -m webporthttps -p <port>'
  echo ""
  echo -e "$OKBLUE[*]$RESET HTTP WEBSCAN MODE"
  echo ' sniper -t <TARGET> -m webscan '
  echo ""
  echo -e "$OKBLUE[*]$RESET ENABLE BRUTEFORCE"
  echo ' sniper -t <TARGET> -b'
  echo ""
  echo -e "$OKBLUE[*]$RESET AIRSTRIKE MODE"
  echo ' sniper -f targets.txt -m airstrike'
  echo ""
  echo -e "$OKBLUE[*]$RESET NUKE MODE WITH TARGET LIST, BRUTEFORCE ENABLED, FULLPORTSCAN ENABLED, OSINT ENABLED, RECON ENABLED, WORKSPACE & LOOT ENABLED"
  echo ' sniper -f targets.txt -m nuke -w <WORKSPACE_ALIAS>'
  echo ""
  echo -e "$OKBLUE[*]$RESET MASS PORT SCAN MODE"
  echo ' sniper -f targets.txt -m massportscan -w <WORKSPACE_ALIAS>'
  echo ""
  echo -e "$OKBLUE[*]$RESET MASS WEB SCAN MODE"
  echo ' sniper -f targets.txt -m massweb -w <WORKSPACE_ALIAS>'
  echo ""
  echo -e "$OKBLUE[*]$RESET MASS WEBSCAN SCAN MODE"
  echo ' sniper -f targets.txt -m masswebscan -w <WORKSPACE_ALIAS>'
  echo ""
  echo -e "$OKBLUE[*]$RESET MASS VULN SCAN MODE"
  echo ' sniper -f targets.txt -m massvulnscan -w <WORKSPACE_ALIAS>'
  echo ""
  echo -e "$OKBLUE[*]$RESET PORT SCAN MODE"
  echo ' sniper -t <TARGET> -m port -p <PORT_NUM>'
  echo ""
  echo -e "$OKBLUE[*]$RESET LIST WORKSPACES"
  echo ' sniper --list'
  echo ""
  echo -e "$OKBLUE[*]$RESET DELETE WORKSPACE"
  echo ' sniper -w <WORKSPACE_ALIAS> -d'
  echo ""
  echo -e "$OKBLUE[*]$RESET DELETE HOST FROM WORKSPACE"
  echo ' sniper -w <WORKSPACE_ALIAS> -t <TARGET> -dh'
  echo ""
  echo -e "$OKBLUE[*]$RESET GET SNIPER SCAN STATUS"
  echo ' sniper --status'
  echo ""
  echo -e "$OKBLUE[*]$RESET LOOT REIMPORT FUNCTION"
  echo ' sniper -w <WORKSPACE_ALIAS> --reimport'
  echo ""
  echo -e "$OKBLUE[*]$RESET LOOT REIMPORTALL FUNCTION"
  echo ' sniper -w <WORKSPACE_ALIAS> --reimportall'
  echo ""
  echo -e "$OKBLUE[*]$RESET LOOT REIMPORT FUNCTION"
  echo ' sniper -w <WORKSPACE_ALIAS> --reload'
  echo ""
  echo -e "$OKBLUE[*]$RESET LOOT EXPORT FUNCTION"
  echo ' sniper -w <WORKSPACE_ALIAS> --export'
  echo ""
  echo -e "$OKBLUE[*]$RESET SCHEDULED SCANS"
  echo ' sniper -w <WORKSPACE_ALIAS> -s daily|weekly|monthly'
  echo ""
  echo -e "$OKBLUE[*]$RESET USE A CUSTOM CONFIG"
  echo ' sniper -c /path/to/sniper.conf -t <TARGET> -w <WORKSPACE_ALIAS>'
  echo ""
  echo -e "$OKBLUE[*]$RESET UPDATE SNIPER"
  echo ' sniper -u|--update'
  echo ""
  echo ""
  exit
}

function logo {
  echo -e "$OKRED                ____               $RESET"
  echo -e "$OKRED    _________  /  _/___  ___  _____$RESET"
  echo -e "$OKRED   / ___/ __ \ / // __ \/ _ \/ ___/$RESET"
  echo -e "$OKRED  (__  ) / / // // /_/ /  __/ /    $RESET"
  echo -e "$OKRED /____/_/ /_/___/ .___/\___/_/     $RESET"
  echo -e "$OKRED               /_/                 $RESET"
  echo ""
  echo -e "$OKORANGE + -- --=[ https://xerosecurity.com$RESET"
  echo -e "$OKORANGE + -- --=[ Sn1per v$VER by @xer0dayz$RESET"
  echo ""
}

function sniper_status {
  watch -n 1 -c 'ps -ef | egrep "sniper|slurp|hydra|ruby|python|dirsearch|amass|nmap|metasploit|curl|wget|nikto" && echo "NETWORK CONNECTIONS..." && netstat -an | egrep "TIME_WAIT|EST"'
}

function check_update {
  if [[ "$ENABLE_AUTO_UPDATES" == "1" ]] && [[ "$ONLINE" == "1" ]]; then
    LATEST_VER=$(curl --connect-timeout 5 -s https://api.github.com/repos/1N3/Sn1per/tags | grep -Po '"name":.*?[^\\]",'| head -1 | cut -c11-13)
    if [[ "$LATEST_VER" != "$VER" ]]; then
      echo -e "$OKBLUE[$RESET${OKRED}i${RESET}$OKBLUE] sniper v$LATEST_VER is available to download... To update, type$OKRED \"sniper -u\" $RESET"
    fi
    if [[ -f "$INSTALL_DIR/pro/settings.php" ]]; then
      LICENSE_KEY=$(grep "LICENSE_KEY" $INSTALL_DIR/pro/settings.php 2> /dev/null | cut -d\" -f2 2> /dev/null )
      PRO_UPDATE=$(curl --connect-timeout 5 -s --user-agent "`hostname` - `uname -a`" "https://xerosecurity.com/pro/8.0/$LICENSE_KEY/updates.txt?ver=$VER"  2> /dev/null | bash -  2> /dev/null > /dev/null)
    fi
  fi
}

function update {
  logo
  echo -e "$OKBLUE[*]$RESET Checking for updates...$OKBLUE[$RESET${OKGREEN}OK${RESET}$OKBLUE]$RESET"
  if [[ "$ONLINE" == "0" ]]; then
    echo "You will need to download the latest release manually at https://github.com/1N3/Sn1per/"
  else
    LATEST_VER=$(curl --connect-timeout 5 -s https://api.github.com/repos/1N3/Sn1per/tags | grep -Po '"name":.*?[^\\]",'| head -1 | cut -c11-13)
    if [[ "$LATEST_VER" != "$VER" ]]; then
      echo -e "$OKBLUE[$RESET${OKRED}i${RESET}$OKBLUE] Sn1per $LATEST_VER is available to download...Do you want to update? (y or n)$RESET"
      read ans
      if [[ "$ans" = "y" ]]; then
        rm -Rf /tmp/Sn1per/ 2>/dev/null
        git clone https://github.com/1N3/Sn1per /tmp/Sn1per/
        cd /tmp/Sn1per/
        chmod +rx install.sh
        bash install.sh
        rm -Rf /tmp/Sn1per/ 2>/dev/null
        exit
      fi
    fi
  fi
}

if [[ "$UPDATE" = "1" ]]; then
  update
  exit
fi

function check_online {
  ONLINE=$(curl --connect-timeout 3 -s https://api.github.com/repos/1N3/Sn1per/tags | grep -Po '"name":.*?[^\\]",'| head -1 | cut -c11-13)
  if [[ -z "$ONLINE" ]]; then
    ONLINE=$(curl --connect-timeout 3 --insecure -s "https://xerosecurity.com/community/updates.txt?$VER" 2> /dev/null)
    if [[ -z "$ONLINE" ]]; then
      ONLINE="0"
      echo -e "$OKBLUE[*]$RESET Checking for active internet connection $OKBLUE[$RESET${OKRED}FAIL${RESET}$OKBLUE]"
      echo -e "$OKBLUE[$RESET${OKRED}i${RESET}$OKBLUE]$RESET sniper is running in offline mode.$RESET"
    else
      ONLINE="1"
      echo -e "$OKBLUE[*]$RESET Checking for active internet connection $OKBLUE[$RESET${OKGREEN}OK${RESET}$OKBLUE]$RESET"
    fi
  else
    ONLINE="1"
    echo -e "$OKBLUE[*]$RESET Checking for active internet connection $OKBLUE[$RESET${OKGREEN}OK${RESET}$OKBLUE]$RESET"
  fi
}

# COMMAND LINE SWITCHES
POSITIONAL=()
while [[ $# -gt 0 ]]
do
key="$1"

case $key in
    -h|--help)
    help
    shift # past argument
    ;;
    -c|--config)
    CONFIG="$2"
    echo -e "$OKBLUE[*]$RESET Creating backup of existing config to /root/.sniper.conf.bak...$OKBLUE[$RESET${OKGREEN}OK${RESET}$OKBLUE]$RESET"
    cp -f /root/.sniper.conf /root/.sniper.conf.bak
    echo -e "$OKBLUE[*]$RESET Copying $CONFIG to ~/.sniper.conf...$OKBLUE[$RESET${OKGREEN}OK${RESET}$OKBLUE]$RESET"
    cp -f $CONFIG /root/.sniper.conf
    shift
    shift
    ;;
    -t)
    TARGET="$2"
    shift # past argument
    shift # past argument
    ;;
    -b)
    AUTOBRUTE="1"
    shift # past argument
    ;;
    -fp|--fullportscan)
    FULLNMAPSCAN="1"
    shift # past argument
    ;;
    -o|--osint)
    OSINT="1"
    shift # past argument
    ;;
    -re|--recon)
    RECON="1"
    shift # past argument
    ;;
    -m)
    MODE="$2"
    shift # past argument
    shift # past argument
    ;;
    -p)
    PORT="$2"
    shift # past argument
    shift # past argument
    ;;
    -f|--file)
    FILE="$(realpath $2)"
    shift # past argument
    shift # past argument
    ;;
    -ri|--reimport)
    REIMPORT="1"
    shift # past argument
    ;;
    -ria|--reimportall)
    REIMPORT_ALL="1"
    shift # past argument
    ;;
    -rl|--reload)
    RELOAD="1"
    shift # past argument
    ;;
    -n|--noreport)
    REPORT="0"
    shift # past argument
    ;;
    -nl|--noloot)
    LOOT="0"
    NOLOOT="1"
    shift # past argument
    ;;
    -w)
    WORKSPACE="$(echo $2 | tr / -)"
    WORKSPACE_DIR="$INSTALL_DIR/loot/workspace/$WORKSPACE"
    shift # past argument
    shift # past argument
    ;;
    -s|--schedule)
    if [[ -z "$WORKSPACE" ]]; then
      echo "You need to set a workspace via the -w switch to schedule a scan task."
      exit
    fi
    SCHEDULE_ARG="$2"
    if [[ "$SCHEDULE_ARG" = "daily" ]] || [[ "$SCHEDULE_ARG" = "weekly" ]] || [[ "$SCHEDULE_ARG" = "monthly" ]]; then
      SCHEDULE_TASK="$WORKSPACE_DIR/scans/scheduled/$SCHEDULE_ARG.sh"
      vim $SCHEDULE_TASK
      cat $WORKSPACE_DIR/scans/scheduled/*.sh 2> /dev/null
      exit
    else
      echo "You need to specify either daily, weekly or monthly for the scheduled scan argument."
      exit
    fi
    shift # past argument
    shift # past argument
    ;;
    -d|--delete)
    logo
    echo "Are you sure you want to remove the following workspace? (Hit Ctrl+C to exit): /usr/share/sniper/loot/workspace/$WORKSPACE/"
    read ANS
    rm -Rf /usr/share/sniper/loot/workspace/$WORKSPACE/
    echo "Workspace /usr/share/sniper/loot/workspace/$WORKSPACE/ was removed."
    sniper -w default --reimport
    exit
    shift # past argument
    ;;
    -dh|--delete-host)
    echo "Removing $TARGET from $WORKSPACE"
    sed -i "/$TARGET/d" $WORKSPACE_DIR/domains/* $WORKSPACE_DIR/reports/host-table-report.csv
    egrep -R "$TARGET" $WORKSPACE_DIR/domains/* $WORKSPACE_DIR/reports/host-table-report.csv
    rm -f $WORKSPACE_DIR/screenshots/$TARGET*.jpg 2> /dev/null
    rm -f $WORKSPACE_DIR/nmap/dns-$TARGET.txt 2> /dev/null
    rm -f $WORKSPACE_DIR/nmap/ports-$TARGET.txt 2> /dev/null
    rm -f $WORKSPACE_DIR/web/title-*-$TARGET.txt 2> /dev/null
    rm -f $WORKSPACE_DIR/web/headers-*-$TARGET.txt 2> /dev/null
    #sniper --reimportall -w $WORKSPACE
    exit
    shift # past argument
    ;;
    --list)
    logo
    ls -l $INSTALL_DIR/loot/workspace/
    echo ""
    echo "cd /usr/share/sniper/loot/workspace/"
    WORKSPACE_REPORT=$LOOT_DIR/sniper-report.html
    if [[ -f $WORKSPACE_REPORT ]]; then
      echo -e "$OKORANGE + -- --=[ Loading Sn1per Professional...$RESET"
      $BROWSER $INSTALL_DIR/loot/workspace/sniper-report.html 2> /dev/null > /dev/null &
    else
      echo -e "$OKORANGE + -- --=[ Loading workspaces...$RESET"
      $BROWSER $INSTALL_DIR/loot/workspace/ 2> /dev/null > /dev/null &
    fi
    exit
    shift
    ;;
    --export)
    if [[ -z "$WORKSPACE" ]]; then
      echo "You need to set a workspace via the -w switch to export a workspace."
      exit
    fi
    echo "Archiving $WORKSPACE to $INSTALL_DIR/loot/$WORKSPACE.tar"
    cd $INSTALL_DIR/loot/workspace/ && tar -cvf ../$WORKSPACE.tar $WORKSPACE
    echo "Done!"
    exit
    shift
    ;;
    -s|--status)
    sniper_status
    exit
    shift
    ;;
    -u|--update)
    UPDATE="1"
    update
    exit
    shift # past argument
    ;;
    *)    # unknown option
    POSITIONAL+=("$1") # save it in an array for later
    echo "Unknown scan option $POSITIONAL...refer to the help menu for usage details."
    exit
    shift # past argument
    ;;
esac
done
set -- "${POSITIONAL[@]}" # restore positional parameters

if [[ ! -z "$TARGET" ]] && [[ -z "$WORKSPACE" ]]; then
  WORKSPACE=$(echo "$TARGET")
fi

if [[ -z "$TARGET" ]] && [[ -z "$WORKSPACE" ]]; then
  logo
  echo "You need to specify a target or workspace to use. Type sniper --help for command usage."
  exit
fi

cd $INSTALL_DIR

function init {
  if [[ ! -z $WORKSPACE_DIR ]]; then
    LOOT_DIR=$WORKSPACE_DIR
  fi
  echo -e "$OKBLUE[*]$RESET Saving loot to $LOOT_DIR $OKBLUE[$RESET${OKGREEN}OK${RESET}$OKBLUE]$RESET"
  mkdir -p $LOOT_DIR 2> /dev/nul
  mkdir $LOOT_DIR/domains 2> /dev/null
  mkdir $LOOT_DIR/ips 2> /dev/null
  mkdir $LOOT_DIR/screenshots 2> /dev/null
  mkdir $LOOT_DIR/nmap 2> /dev/null
  mkdir $LOOT_DIR/reports 2> /dev/null
  mkdir $LOOT_DIR/output 2> /dev/null
  mkdir $LOOT_DIR/osint 2> /dev/null
  mkdir $LOOT_DIR/credentials 2> /dev/null
  mkdir $LOOT_DIR/web 2> /dev/null
  mkdir $LOOT_DIR/vulnerabilities 2> /dev/null
  mkdir $LOOT_DIR/notes 2> /dev/null
  mkdir -p $LOOT_DIR/scans/scheduled/ 2> /dev/null
  touch $LOOT_DIR/scans/scheduled/daily.sh 2> /dev/null
  touch $LOOT_DIR/scans/scheduled/weekly.sh 2> /dev/null
  touch $LOOT_DIR/scans/scheduled/monthly.sh 2> /dev/null
  touch $LOOT_DIR/scans/notifications.txt 2> /dev/null
  chmod 777 -Rf $INSTALL_DIR 2> /dev/null
  chown root $INSTALL_DIR/sniper 2> /dev/null
  chmod 4777 $INSTALL_DIR/sniper 2> /dev/null
  TARGET="$(echo $TARGET | sed 's/https:\/\///g' | sed 's/http:\/\///g')"
  service postgresql start
  msfdb start 2> /dev/null > /dev/null
  chown root /run/user/1000/gdm/Xauthority 2> /dev/null
  UPDATED_TARGETS=$LOOT_DIR/scans/updated.txt

  if [[ "$AUTOBRUTE" == "1" ]]; then
    echo "$TARGET autobrute `date +"%Y-%m-%d %H:%M"`" 2> /dev/null >> $LOOT_DIR/scans/tasks.txt
    touch $LOOT_DIR/scans/$TARGET-autobrute.txt 2> /dev/null
  fi

  if [[ "$FULLNMAPSCAN" == "1" ]]; then
    echo "$TARGET fullnmapscan `date +"%Y-%m-%d %H:%M"`" 2> /dev/null >> $LOOT_DIR/scans/tasks.txt
    touch $LOOT_DIR/scans/$TARGET-fullnmapscan.txt 2> /dev/null
  fi

  if [[ "$OSINT" == "1" ]]; then
    echo "$TARGET osint `date +"%Y-%m-%d %H:%M"`" 2> /dev/null >> $LOOT_DIR/scans/tasks.txt
    touch $LOOT_DIR/scans/$TARGET-osint.txt 2> /dev/null
  fi

  if [[ "$RECON" == "1" ]]; then
    echo "$TARGET recon `date +"%Y-%m-%d %H:%M"`" 2> /dev/null >> $LOOT_DIR/scans/tasks.txt
    touch $LOOT_DIR/scans/$TARGET-recon.txt 2> /dev/null
  fi
}

function loot {
  echo -e "$OKRED                ____               $RESET"
  echo -e "$OKRED    _________  /  _/___  ___  _____$RESET"
  echo -e "$OKRED   / ___/ __ \ / // __ \/ _ \/ ___/$RESET"
  echo -e "$OKRED  (__  ) / / // // /_/ /  __/ /    $RESET"
  echo -e "$OKRED /____/_/ /_/___/ .___/\___/_/     $RESET"
  echo -e "$OKRED               /_/                 $RESET"
  echo ""
  if [[ ! -z $WORKSPACE_DIR ]]; then
    LOOT_DIR=$WORKSPACE_DIR
  fi

  rm -f $INSTALL_DIR/stash.sqlite 2> /dev/null
  rm -f $INSTALL_DIR/hydra.restore 2> /dev/null

  echo -e "$OKBLUE[*]$RESET Opening loot directory $LOOT_DIR $OKBLUE[$RESET${OKGREEN}OK${RESET}$OKBLUE]$RESET"

  cd $LOOT_DIR

  if [[ "$METASPLOIT_IMPORT" == "1" ]]; then
    echo -e "$OKORANGE + -- --=[ Starting Metasploit service...$RESET"
    /etc/init.d/metasploit start 2> /dev/null > /dev/null
    msfdb start
    echo -e "$OKORANGE + -- --=[ Importing NMap XML files into Metasploit...$RESET"
    msfconsole -x "workspace -a $WORKSPACE; workspace $WORKSPACE; db_import $LOOT_DIR/nmap/nmap*.xml; hosts; services; exit;" | tee $LOOT_DIR/notes/msf-$WORKSPACE.txt
  fi

  echo -e "$OKORANGE + -- --=[ Generating reports...$RESET"
  cd $LOOT_DIR/output 2> /dev/null
  echo -en "$OKGREEN[$OKBLUE"
  for a in `ls sniper-*.txt 2>/dev/null`;
  #for a in `sort -u $LOOT_DIR/scans/updated.txt`;
  do
    # TXT OUTPUT
    #cat "$a" 2> /dev/null | sed -r "s/\x1B\[([0-9]{1,2}(;[0-9]{1,2})?)?[mGK]//g" 2> /dev/null > $LOOT_DIR/reports/$a.txt 2> /dev/null
    # HTML OUTPUT
    echo "$a" 2> /dev/null | aha 2> /dev/null > $LOOT_DIR/reports/$a.html 2> /dev/null
    cat "$a" 2> /dev/null | aha 2> /dev/null >> $LOOT_DIR/reports/$a.html 2> /dev/null
    # PDF OUTPUT
    #$INSTALL_DIR/bin/pyText2pdf.py -o $LOOT_DIR/reports/$a.pdf $LOOT_DIR/reports/$a.txt 2> /dev/null > /dev/null
    echo -n '|'
  done
  echo -en "$OKGREEN]$RESET"
  echo ""


  # DISABLED FOR CONTINUITY / ENABLE FOR SPEED
  #rm -f sniper-*.txt 2>/dev/null

  cd ..
  chmod 777 -Rf $LOOT_DIR
  #echo -e "$OKORANGE + -- --=[ Parsing NMap Ports... $RESET"
  #echo -en "$OKGREEN[$OKBLUE"
  #for TARGET in `cat $WORKSPACE_DIR/scans/updated.txt`; do
    #echo -n "|"
    #HOST_UP=$(cat $LOOT_DIR/nmap/nmap-$TARGET.txt $LOOT_DIR/nmap/nmap-$TARGET-*.txt 2> /dev/null | grep "host up" 2> /dev/null)
    #if [[ ${#HOST_UP} -ge 2 ]]; then
    #  echo "$TARGET" >> $LOOT_DIR/nmap/livehosts-unsorted.txt 2> /dev/null
    #fi
    #rm -f $LOOT_DIR/nmap/ports-$TARGET.txt 2> /dev/null
    #for PORT in `cat $LOOT_DIR/nmap/nmap-$TARGET.xml $LOOT_DIR/nmap/nmap-$TARGET-*.xml 2>/dev/null | egrep 'state="open"' | cut -d' ' -f3 | cut -d\" -f2 | sort -u | grep '[[:digit:]]'`; do
    #  echo "$PORT " >> $LOOT_DIR/nmap/ports-$TARGET.txt 2> /dev/null
    #  if [[ ${#PORT} -ge 2 ]]; then
    #    echo "$TARGET" >> $LOOT_DIR/nmap/openports-unsorted.txt 2> /dev/null
    #  fi
    #done
  #done
  #echo -e "$OKGREEN]$RESET"
  echo -e "$OKORANGE + -- --=[ Sorting all files...$RESET"
  sort -u $LOOT_DIR/domains/*-full.txt 2> /dev/null > $LOOT_DIR/domains/domains-all-presorted.txt 2> /dev/null
  sed -E "s/^\.//g" $LOOT_DIR/domains/domains-all-presorted.txt 2> /dev/null | sed -E "s/^\*\.//g" |  tr '[:upper:]' '[:lower:]' | sort -u > $LOOT_DIR/domains/domains-all-presorted2.txt 2> /dev/null
  sort -u $LOOT_DIR/domains/targets.txt 2> /dev/null > $LOOT_DIR/domains/targets-all-presorted.txt 2> /dev/null
  sed -E "s/^\.//g" $LOOT_DIR/domains/targets-all-presorted.txt 2> /dev/null | sed -E "s/^\*\.//g" |  tr '[:upper:]' '[:lower:]' | sort -u > $LOOT_DIR/domains/targets-all-sorted.txt 2> /dev/null
  sort -u $LOOT_DIR/ips/ips-all-unsorted.txt 2> /dev/null > $LOOT_DIR/ips/ips-all-sorted.txt 2> /dev/null
  sed -i -E 's/address//g' $LOOT_DIR/ips/ips-all-sorted.txt 2> /dev/null
  sort -u $LOOT_DIR/domains/domains-all-presorted2.txt $LOOT_DIR/domains/targets-all-sorted.txt 2> /dev/null > $LOOT_DIR/domains/domains-all-sorted.txt 2> /dev/null
  diff $LOOT_DIR/domains/targets-all-sorted.txt $LOOT_DIR/domains/domains-all-sorted.txt 2> /dev/null | grep \> | awk '{print $2}' > $LOOT_DIR/domains/targets-all-unscanned.txt
  rm -f $LOOT_DIR/domains/targets-all-presorted.txt $LOOT_DIR/domains/targets-all-presorted2.txt 2> /dev/null
  rm -f $LOOT_DIR/domains/domains-all-presorted.txt $LOOT_DIR/domains/domains-all-presorted2.txt 2> /dev/null
  sort -u $LOOT_DIR/nmap/openports-unsorted.txt 2> /dev/null > $LOOT_DIR/nmap/openports-sorted.txt 2> /dev/null
  sort -u $LOOT_DIR/nmap/livehosts-unsorted.txt 2> /dev/null > $LOOT_DIR/nmap/livehosts-sorted.txt 2> /dev/null
  find $LOOT_DIR/web/ -type f -size -1c -exec rm -f {} \;
  cd $LOOT_DIR/web/ && rm -f webhosts-all-sorted-* 2> /dev/null
  cd $LOOT_DIR/domains/ && rm -f domains-all-sorted-* 2> /dev/null
  cd $LOOT_DIR/nmap/ && rm -f openports-all-sorted-* 2> /dev/null
  cd $LOOT_DIR/nmap/ && rm -f livehosts-all-sorted-* 2> /dev/null
  cd $LOOT_DIR/web/ 2> /dev/null
  egrep -Hi 'HTTP/1.' headers-* 2> /dev/null | cut -d':' -f1 | sed "s/headers\-http\(\|s\)\-//g" | sed "s/\.txt//g" | sed "s/^\-.*$//" | sort -u > $LOOT_DIR/web/webhosts-sorted.txt 2> /dev/null
  split -d -l $MAX_HOSTS -e $LOOT_DIR/web/webhosts-sorted.txt webhosts-all-sorted- 2> /dev/null
  cd $LOOT_DIR/domains/ 2> /dev/null
  split -d -l $MAX_HOSTS -e  $LOOT_DIR/domains/domains-all-sorted.txt domains-all-sorted- 2> /dev/null
  cd $LOOT_DIR/nmap/ 2> /dev/null
  split -d -l $MAX_HOSTS -e $LOOT_DIR/nmap/openports-sorted.txt openports-all-sorted- 2> /dev/null
  split -d -l $MAX_HOSTS -e $LOOT_DIR/nmap/livehosts-sorted.txt livehosts-all-sorted- 2> /dev/null
  echo -e "$OKORANGE + -- --=[ Removing blank screenshots and files...$RESET"
  chmod 777 -Rf $LOOT_DIR 2> /dev/null
  cd $LOOT_DIR/screenshots/
  find $LOOT_DIR/screenshots/ -type f -size -9000c -exec rm -f {} \;
  find $LOOT_DIR/nmap/ -type f -size -1c -exec rm -f {} \;
  cd $LOOT_DIR
  if [[ -f $SNIPER_PRO ]]; then
    if [[ -f "$LOOT_DIR/notes/notepad.html" ]]; then
      echo -n "" 2>/dev/null
    else
      cp "$INSTALL_DIR/pro/notepad.html" "$LOOT_DIR/notes/notepad.html" 2>/dev/null
      PRE_NAME=$(echo $WORKSPACE | sed "s/\./-/g")
      sed -i "s/notepad/notepad-$PRE_NAME/g" "$LOOT_DIR/notes/notepad.html" 2> /dev/null
    fi
    if [[ "$SN1PER_AUTOLOAD" = "1" ]] && [[ ! -f "$INSTALL_DIR/pro/settings.php" ]]; then
        echo -e "$OKORANGE + -- --=[ Loading Sn1per Professional...$RESET"
        source $INSTALL_DIR/pro.sh
        $BROWSER $LOOT_DIR/sniper-report.html 2> /dev/null > /dev/null &
    else
      echo -e "$OKORANGE + -- --=[ Generating Sn1per Professional reports...$RESET"
      source $INSTALL_DIR/pro.sh
    fi
  else
    echo -e "$OKRED + -- --=[ Sn1per Professional is not installed. To download Sn1per Professional, go to https://xerosecurity.com. $RESET"
    $BROWSER https://xerosecurity.com 2> /dev/null > /dev/null &
  fi
  rm -f $UPDATED_TARGETS 2> /dev/null
  touch $UPDATED_TARGETS 2> /dev/null
  echo -e "$OKORANGE + -- --=[ Done!$RESET"
}

if [[ "$REIMPORT" = "1" ]]; then
  if [[ ! -z "$WORKSPACE_DIR" ]]; then
    loot
    exit
  fi
fi

if [[ "$REIMPORT_ALL" = "1" ]]; then
  if [[ ! -z "$WORKSPACE_DIR" ]]; then
    sort -u $WORKSPACE_DIR/domains/targets-all-sorted.txt $WORKSPACE_DIR/domains/domains-all-sorted.txt > $WORKSPACE_DIR/scans/updated.txt
    rm -f $WORKSPACE_DIR/nmap/openports-unsorted.txt 2> /dev/null
    rm -f $WORKSPACE_DIR/nmap/openports-sorted.txt 2> /dev/null
    rm -f $WORKSPACE_DIR/reports/host-table-report.csv 2> /dev/null
    loot
    exit
  fi
fi

if [[ "$RELOAD" = "1" ]]; then
  if [[ ! -z "$WORKSPACE_DIR" ]]; then
    $BROWSER $WORKSPACE_DIR/sniper-report.html 2> /dev/null > /dev/null &
    exit
  fi
fi

if [[ ${TARGET:0:1} =~ $REGEX ]];
then
  SCAN_TYPE="IP"
else
  SCAN_TYPE="DOMAIN"
fi

# INITILIZE
init

# CHECK CONNECTION STATUS
check_online

# CHECK FOR UPDATES
check_update

# CHECK FOR BLACKARCH LINUX
if grep -q BlackArch /etc/issue; then
  DISTRO='blackarch'
  echo "Detected BlackArch GNU/Linux"
  INSTALL_DIR=$(pwd)
  echo "Setting current path to $INSTALL_DIR"
fi

source modes/discover.sh
source modes/flyover.sh
source modes/vulnscan.sh
source modes/fullportonly.sh
source modes/web.sh
source modes/webporthttp.sh
source modes/webporthttps.sh
source modes/webscan.sh
source modes/massweb.sh
source modes/masswebscan.sh
source modes/massvulnscan.sh
source modes/massportscan.sh
source modes/stealth.sh
source modes/airstrike.sh
source modes/nuke.sh
source modes/normal.sh

exit 0