更新日志 - 22.03.6 - 20240119 #1281
Replies: 8 comments 22 replies
-
|
关于passwall的问题：
|
Beta Was this translation helpful? Give feedback.
This comment was marked as off-topic.
This comment was marked as off-topic.
This comment was marked as off-topic.
This comment was marked as off-topic.
-
本地化网关的简单教程首先了解下 “DHCP 选项” 的语法：
典型使用场景（必须iStoreOS提供DHCP服务，以下皆假设主路由IP是192.168.100.1，旁路由IP是192.168.100.2，掩码都是24位）：
|
Beta Was this translation helpful? Give feedback.
-
|
群里部分用户出现了更新后接口丢失防火墙区域导致断网的问题，在这里提醒！ |
Beta Was this translation helpful? Give feedback.
-
|
奇怪，最近没改uci配置啊 |
Beta Was this translation helpful? Give feedback.
-
|
我测试了升级或者重置都没出现防火墙区域丢失的问题。问一下安装了什么插件 |
Beta Was this translation helpful? Give feedback.
-
|
我没有详细测试，不过从这位用户有VAP开头的接口来看，装有访问AP/光猫，不知是否有关 |
Beta Was this translation helpful? Give feedback.
-
|
访问AP/光猫只是会操作vap相关的那些接口，而且每次开机都会执行一样的操作，不会因为升级而有什么不同 |
Beta Was this translation helpful? Give feedback.
-
|
关于iStoreOS旧版本升级到新版本后passwall的haproxy(负载均衡)无法使用的问题。经过我的测试发现是某个软件包在升级后不见了导致的。先从解决办法说起。从软件包重新安装 opkg update
opkg install libpcre以下是测试和复现过程 -------------------------------------------------------
iStoreOS 22.03.5, 2023122916
-------------------------------------------------------
root@iStoreOS:~# haproxy
HAProxy version 2.4.22-1 2023/11/26 - https://haproxy.org/
Status: long-term supported branch - will stop receiving fixes around Q2 2026.
Known bugs: http://www.haproxy.org/bugs/bugs-2.4.22.html
Running on: Linux 5.10.176 #0 SMP Fri Dec 29 07:18:08 2023 x86_64
Usage : haproxy [-f <cfgfile|cfgdir>]* [ -vdVD ] [ -n <maxconn> ] [ -N <maxpconn> ]
[ -p <pidfile> ] [ -m <max megs> ] [ -C <dir> ] [-- <cfgfile>*]
-v displays version ; -vv shows known build options.
-d enters debug mode ; -db only disables background mode.
-dM[<byte>] poisons memory with <byte> (defaults to 0x50)
-V enters verbose mode (disables quiet mode)
-D goes daemon ; -C changes to <dir> before loading files.
-W master-worker mode.
-q quiet mode : don't display messages
-c check mode : only check config files and exit
-n sets the maximum total # of connections (uses ulimit -n)
-m limits the usable amount of memory (in MB)
-N sets the default, per-proxy maximum # of connections (0)
-L set local peer name (default to hostname)
-p writes pids of all children to this file
-de disables epoll() usage even when available
-dp disables poll() usage even when available
-dS disables splice usage (broken on old kernels)
-dG disables getaddrinfo() usage
-dR disables SO_REUSEPORT usage
-dr ignores server address resolution failures
-dV disables SSL verify on servers side
-dW fails if any warning is emitted
-dD diagnostic mode : warn about suspicious configuration statements
-sf/-st [pid ]* finishes/terminates old pids.
-x <unix_socket> get listening sockets from a unix socket
-S <bind>[,<bind options>...] new master CLI
root@iStoreOS:~# opkg list-installed |grep libpcre
libpcre - 8.45-1
libpcre2 - 10.37-1以上是升级前的 -------------------------------------------------------
iStoreOS 22.03.6, 2024011910
-------------------------------------------------------
root@iStoreOS:~# haproxy
Error loading shared library libpcreposix.so.0: No such file or directory (needed by /usr/sbin/haproxy)
Error loading shared library libpcre.so.1: No such file or directory (needed by /usr/sbin/haproxy)
Error relocating /usr/sbin/haproxy: pcre_version: symbol not found
Error relocating /usr/sbin/haproxy: pcre_exec: symbol not found
Error relocating /usr/sbin/haproxy: pcre_config: symbol not found
Error relocating /usr/sbin/haproxy: pcre_compile: symbol not found
Error relocating /usr/sbin/haproxy: pcre_study: symbol not found
Error relocating /usr/sbin/haproxy: pcre_free_study: symbol not found
Error relocating /usr/sbin/haproxy: pcre_free: symbol not found
root@iStoreOS:~# opkg list-installed |grep libpcre
libpcre2 - 10.37-1
root@iStoreOS:~# opkg update
Downloading https://istore.linkease.com/repo/all/compat/Packages.gz
Updated list of available packages in /var/opkg-lists/istore_compat
Downloading https://istore.linkease.com/repo/all/compat/Packages.sig
Signature check passed.
Downloading https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/22.03.6/targets/x86/64/packages/Packages.gz
Updated list of available packages in /var/opkg-lists/openwrt_core
Downloading https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/22.03.6/targets/x86/64/packages/Packages.sig
Signature check passed.
Downloading https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/22.03.6/packages/x86_64/base/Packages.gz
Updated list of available packages in /var/opkg-lists/openwrt_base
Downloading https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/22.03.6/packages/x86_64/base/Packages.sig
Signature check passed.
Downloading https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/22.03.6/packages/x86_64/luci/Packages.gz
Updated list of available packages in /var/opkg-lists/openwrt_luci
Downloading https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/22.03.6/packages/x86_64/luci/Packages.sig
Signature check passed.
Downloading https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/22.03.6/packages/x86_64/packages/Packages.gz
Updated list of available packages in /var/opkg-lists/openwrt_packages
Downloading https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/22.03.6/packages/x86_64/packages/Packages.sig
Signature check passed.
Downloading https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/22.03.6/packages/x86_64/routing/Packages.gz
Updated list of available packages in /var/opkg-lists/openwrt_routing
Downloading https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/22.03.6/packages/x86_64/routing/Packages.sig
Signature check passed.
Downloading https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/22.03.6/packages/x86_64/telephony/Packages.gz
Updated list of available packages in /var/opkg-lists/openwrt_telephony
Downloading https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/22.03.6/packages/x86_64/telephony/Packages.sig
Signature check passed.
root@iStoreOS:~# opkg install libpcre
Installing libpcre (8.45-3) to root...
Downloading https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/22.03.6/packages/x86_64/base/libpcre_8.45-3_x86_64.ipk
Configuring libpcre.
root@iStoreOS:~# haproxy
HAProxy version 2.4.22-1 2023/11/26 - https://haproxy.org/
Status: long-term supported branch - will stop receiving fixes around Q2 2026.
Known bugs: http://www.haproxy.org/bugs/bugs-2.4.22.html
Running on: Linux 5.10.201 #0 SMP Tue Jan 16 11:33:34 2024 x86_64
Usage : haproxy [-f <cfgfile|cfgdir>]* [ -vdVD ] [ -n <maxconn> ] [ -N <maxpconn> ]
[ -p <pidfile> ] [ -m <max megs> ] [ -C <dir> ] [-- <cfgfile>*]
-v displays version ; -vv shows known build options.
-d enters debug mode ; -db only disables background mode.
-dM[<byte>] poisons memory with <byte> (defaults to 0x50)
-V enters verbose mode (disables quiet mode)
-D goes daemon ; -C changes to <dir> before loading files.
-W master-worker mode.
-q quiet mode : don't display messages
-c check mode : only check config files and exit
-n sets the maximum total # of connections (uses ulimit -n)
-m limits the usable amount of memory (in MB)
-N sets the default, per-proxy maximum # of connections (0)
-L set local peer name (default to hostname)
-p writes pids of all children to this file
-de disables epoll() usage even when available
-dp disables poll() usage even when available
-dS disables splice usage (broken on old kernels)
-dG disables getaddrinfo() usage
-dR disables SO_REUSEPORT usage
-dr ignores server address resolution failures
-dV disables SSL verify on servers side
-dW fails if any warning is emitted
-dD diagnostic mode : warn about suspicious configuration statements
-sf/-st [pid ]* finishes/terminates old pids.
-x <unix_socket> get listening sockets from a unix socket
-S <bind>[,<bind options>...] new master CLI以上是升级后的 |
Beta Was this translation helpful? Give feedback.
-
|
好像是因为wget的依赖从libpcre变成了libpcre2，所以libpcre就没集成了 |
Beta Was this translation helpful? Give feedback.
-
|
haproxy重新安装的话，应该会自动安装 libpcre |
Beta Was this translation helpful? Give feedback.
-
|
之后固件会加回libpcre，避免之前安装的软件包的依赖不满足 |
Beta Was this translation helpful? Give feedback.
-
|
更新到iStoreOS 22.03.6 2024011910固件后，通过ipv6地址远程桌面连接不上，防火墙设置转发已选择了接受，请楼主修复这个bug，感谢！ |
Beta Was this translation helpful? Give feedback.
-
|
我测试了一下没有问题，而且你对防火墙的用法是错误的，不能整个接受。有需要开放的IPv6端口请使用防火墙通信规则。 |
Beta Was this translation helpful? Give feedback.
-
|
感谢大神的指导！ |
Beta Was this translation helpful? Give feedback.
-
|
对于Windows的SLAAC后缀固定问题做一下补充，由于Windows隐私问题，默认启用了RandomizeIdentifiers Set-NetIPv6Protocol -RandomizeIdentifiers Disabled |
Beta Was this translation helpful? Give feedback.
-
|
如果是要外网直接访问内网设备的公网ipv6，那应该配置通信规则允许转发。或者配置端口转发后用路由器的公网ipv6来访问 |
Beta Was this translation helpful? Give feedback.
-
|
为啥我的 R4S 刷入istore 系统直接不启动啊 难道是因为是1G版本的吗 |
Beta Was this translation helpful? Give feedback.
-
|
目前没设备测试，但是根据网友的反馈，可以先刷 21.02.3 最后一个版本，然后再在线升级到最新版本就行了。 |
Beta Was this translation helpful? Give feedback.
-
|
好的 我晚上清下tf卡分区 刷上去试试看 如果可以我提供一下 ttl日志 |
Beta Was this translation helpful? Give feedback.
-
|
嗯，有ttl就更好了，开个新issue或者在相关issue把ttl的日志贴一下 |
Beta Was this translation helpful? Give feedback.
-
|
我的R4S 坏了 [大哭][大哭][大哭] 已经送去修了 能修好的话 回来立马贴上日志 |
Beta Was this translation helpful? Give feedback.
-
|
更新今天的版本之后，KVM虚拟机创建的win10无法启动，提示如下： |
Beta Was this translation helpful? Give feedback.
-
|
'br-vmf'很明显应该就是kvm自己创建的，看看前面还有没有其他错误，也检查下系统日志和内核日志 |
Beta Was this translation helpful? Give feedback.
-
|
软路由作为旁路由使用，生级以后发现科学上网都不好使了，用任何翻墙软件链接节点，在软理由⬆️都可以ping通google，但是其他链接软路由的下级设备都不好使。在电脑上显示网址不安全。哪位大神可以指点下 |
Beta Was this translation helpful? Give feedback.
-
|
我是旁路由用来做adguardhome + smartdns，更新之后无法上网，经过排查后旁路由自己向adguardhome + smartdns 发送dns请求是没问题的。主路由和其他设备使用旁路由地址发送DNS请求都是不行的。 |
Beta Was this translation helpful? Give feedback.
-
|
“标签”只是个前端ui而已，后端完全没变化，dnsmasq本来就支持的。如果你都没配置“标签”，那不可能有影响的。 |
Beta Was this translation helpful? Give feedback.
-
|
那我就不知道了，我更新以后就出bug了。QWQ我啥也没动 |
Beta Was this translation helpful? Give feedback.
-
|
假如我的主路由后台为192.168.2.1 | iStoreOS旁路由后台为192.168.2.100 最后在主路由后台设置DNS地址为192.168.2.100。 理论上来说应该是一切正常，我更新前也是这样的配置。 但如果将旁路由的DNS地址设置为127.0.0.1，旁路由自己可以正常使用ADH+SmartDNS的DNS解析服务，在ADH后台日志可以看到有使用记录。 #请问一下大佬，能不能帮忙看一下我的配置哪里出问题了QWQ。 |
Beta Was this translation helpful? Give feedback.
-
本地化网关
内核
系统
应用
设备
Beta Was this translation helpful? Give feedback.
All reactions