Genesis GV60 CAN error check connection #32339
Replies: 12 comments 5 replies
-
Confirmed, it doesn't recognize my ECU |
Beta Was this translation helpful? Give feedback.
-
Ok members...i am still battling this problem with my C3X,Since last post I received 2 OBD-c cables from comma,all producing the same message, I'm starting to think there is something defective going on with in the unit, the loom provided does look a little different with pinout, does anyone have pinouts drawings off the Hyundai K harness? Or should I just send the unit back and give up on it. |
Beta Was this translation helpful? Give feedback.
-
Hi Shane
Sent from Outlook for iOS<https://aka.ms/o0ukef>
…________________________________
From: Shane Smiskol ***@***.***>
Sent: Wednesday, May 29, 2024 7:28:05 AM
To: commaai/openpilot ***@***.***>
Cc: AllanGV60 ***@***.***>; Author ***@***.***>
Subject: Re: [commaai/openpilot] Genesis GV60 CAN error check connection (Discussion #32339)
What is your dongle id?
—
Reply to this email directly, view it on GitHub<#32339 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BIF4YIEQTWGFXG4LL3NYD63ZETZGLAVCNFSM6AAAAABHFNJ4XGVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TKOBVHE2DQ>.
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Hi Shane….there you go[Image.png]
Sent from Outlook for iOS<https://aka.ms/o0ukef>
…________________________________
From: Shane Smiskol ***@***.***>
Sent: Wednesday, May 29, 2024 7:30:17 AM
To: commaai/openpilot ***@***.***>
Cc: AllanGV60 ***@***.***>; Author ***@***.***>
Subject: Re: [commaai/openpilot] Genesis GV60 CAN error check connection (Discussion #32339)
What is your dongle id?
—
Reply to this email directly, view it on GitHub<#32339 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BIF4YIFYHKM3GLLT2VDQRBTZETZOTAVCNFSM6AAAAABHFNJ4XGVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TKOBVHE3DE>.
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
I’ll see if i can convert to pdf
Sent from Outlook for iOS<https://aka.ms/o0ukef>
…________________________________
From: Shane Smiskol ***@***.***>
Sent: Wednesday, May 29, 2024 7:47:14 AM
To: commaai/openpilot ***@***.***>
Cc: AllanGV60 ***@***.***>; Author ***@***.***>
Subject: Re: [commaai/openpilot] Genesis GV60 CAN error check connection (Discussion #32339)
I don't see an image
—
Reply to this email directly, view it on GitHub<#32339 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BIF4YIBGCLMMHUZL35MNZDTZET3OFAVCNFSM6AAAAABHFNJ4XGVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TKOBWGA4DO>.
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Hope this helps
5372624183861cc/2024-05-19--10-43-55/0
Sent from Outlook for iOS<https://aka.ms/o0ukef>
…________________________________
From: Shane Smiskol ***@***.***>
Sent: Wednesday, May 29, 2024 7:47:14 AM
To: commaai/openpilot ***@***.***>
Cc: AllanGV60 ***@***.***>; Author ***@***.***>
Subject: Re: [commaai/openpilot] Genesis GV60 CAN error check connection (Discussion #32339)
I don't see an image
—
Reply to this email directly, view it on GitHub<#32339 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BIF4YIBGCLMMHUZL35MNZDTZET3OFAVCNFSM6AAAAABHFNJ4XGVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TKOBWGA4DO>.
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
I just noticed it did not copy the letters so I’ll typ it in this time
53E72b24183861cc
Sent from Outlook for iOS<https://aka.ms/o0ukef>
…________________________________
From: Shane Smiskol ***@***.***>
Sent: Wednesday, May 29, 2024 7:47:14 AM
To: commaai/openpilot ***@***.***>
Cc: AllanGV60 ***@***.***>; Author ***@***.***>
Subject: Re: [commaai/openpilot] Genesis GV60 CAN error check connection (Discussion #32339)
I don't see an image
—
Reply to this email directly, view it on GitHub<#32339 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BIF4YIBGCLMMHUZL35MNZDTZET3OFAVCNFSM6AAAAABHFNJ4XGVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TKOBWGA4DO>.
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Thanks Shane….Just so im not missing anything, i did send my device back and it was delivered today, i did include all my information in with it, or are you replying to my git hub post that I posted two weeks ago?
It is a 2022 Genesis GV60 Performance
Sent from Outlook for iOS<https://aka.ms/o0ukef>
…________________________________
From: Shane Smiskol ***@***.***>
Sent: Wednesday, May 29, 2024 8:07:26 AM
To: commaai/openpilot ***@***.***>
Cc: AllanGV60 ***@***.***>; Author ***@***.***>
Subject: Re: [commaai/openpilot] Genesis GV60 CAN error check connection (Discussion #32339)
Thanks. According to your route, you have an ADAS ECU which usually means it has HDA2 and the bus structure is slightly different. Can you tell me which trim you have, which options and packages the vehicle has?
—
Reply to this email directly, view it on GitHub<#32339 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BIF4YIC5JBWUEU3AEIF65ULZET5Z5AVCNFSM6AAAAABHFNJ4XGVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TKOBWGI2DO>.
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Sent from Outlook for iOS<https://aka.ms/o0ukef>
…________________________________
From: Shane Smiskol ***@***.***>
Sent: Wednesday, May 29, 2024 8:08:26 AM
To: commaai/openpilot ***@***.***>
Cc: AllanGV60 ***@***.***>; Author ***@***.***>
Subject: Re: [commaai/openpilot] Genesis GV60 CAN error check connection (Discussion #32339)
Can you also take photos of your car's harness connector? Please also try to find your harness connector from scratch using this page: https://github.com/commaai/openpilot/wiki/Hyundai-Kia-Genesis
—
Reply to this email directly, view it on GitHub<#32339 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BIF4YIHR2CDNIQ2NC3NNORTZET55VAVCNFSM6AAAAABHFNJ4XGVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TKOBWGI2TG>.
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Hi Shane…..Here are some photos that you requested, I have also included a screen shot that I was able to get off comma connect just in case there is some info that may help, the device was supplied with a Hyundai K harness, looking at the wiring diagrams it could also be the O harness as the car harness only has 6 wires the active pins are slightly different with only 5 pins lining up, the Q loom looks the same as the K and like the K loom it has a 7 wire configuration, I’m thinking we would need to know what the pinout are on the car loom from Hyundai, just on a side note the car cruise and lane keeping system did function as it should with the K harness connected.
Hoping we can find a solution.
Regards Allan
From: Shane Smiskol ***@***.***>
Sent: Wednesday, May 29, 2024 8:08 AM
To: commaai/openpilot ***@***.***>
Cc: AllanGV60 ***@***.***>; Author ***@***.***>
Subject: Re: [commaai/openpilot] Genesis GV60 CAN error check connection (Discussion #32339)
Can you also take photos of your car's harness connector? Please also try to find your harness connector from scratch using this page: https://github.com/commaai/openpilot/wiki/Hyundai-Kia-Genesis
—
Reply to this email directly, view it on GitHub <#32339 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/BIF4YIHR2CDNIQ2NC3NNORTZET55VAVCNFSM6AAAAABHFNJ4XGVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TKOBWGI2TG> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/BIF4YIHDKAZDFNAI2T65Y3TZET55VA5CNFSM6AAAAABHFNJ4XGWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQASJDE2.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
Sorry Shane.....Hopefully it comes thru this time. |
Beta Was this translation helpful? Give feedback.
-
Hi Shane....I was able to get this info from my local dealership, maybe you are a bit more familiar with the drawings than I am or you may be able to pass it on to your development team. |
Beta Was this translation helpful? Give feedback.
-
Hi Guys….Just installed Comma3X in my GV60 Performance I purchased it in Feb23 thinking it was built in 23, turns out its build date was Dec22, Im not sure the Comma3 recognizes the car, id be really great full for some help on resolving my issue
Beta Was this translation helpful? Give feedback.
All reactions